[harit]

Originally Posted by Collector

By any chance does your friend have any bits for the W114/W115??? .......... Thanks Arthur

Sure "BITS" are available, you need to inform what is required. A list please.

Cheers harit

[Collector]

Originally Posted by harit

Sure "BITS" are available, you need to inform what is required. A list please.

Cheers harit

I need tail lights, body trims, all rubber beadings and suspension rubbers, Gear box and Diff oil seals and a wiring harness as a start and perhaps a few other things as well as the build goes on

[thebulletboy]

Originally Posted by KartikeyaL

I am looking for a Pair of Lucas 464 Tail Lamp lenses,
picture attached for reference.

Lucas made many variations of the 464 lens. These were designated 464A, 464C, 464E etc.
The pic that you have attached looks like a C or E variant.

If you have a vehicle that needs this, pls PM me.

[harit]

This is supposed to be a 2 cylinder engine, no idea about the make. Its available for sale, but I am curious as to the make.

Cheers harit

[wasif]

That is a DKW Two Cylinder two stroker ......Solanki had bought one from my friend Zozy way back

[V-16]

Originally Posted by vikramv007

I know somebody who has lots of spares for the Fintail Mercedes. Interested people please PM me. Even i might have some Fintail parts such as the gearbox, rear tail lamp etc

Sent you PM

Originally Posted by Collector

By any chance does your friend have any bits for the W114/W115??? I am also in Coimbatore and in desperate need for items to get me Merc back on the road again.If there is any possabality please let me know. Either here or directly on planter472002@yahoo.co.in
Thanks
Arthur

Originally Posted by harit

Sure "BITS" are available, you need to inform what is required. A list please.
Cheers harit

I need also Haritji. Almost whatever can be got. Kindly email me what bits are available and i shall be eternally greatful.

[Sudarshan]

Originally Posted by harit

This is supposed to be a 2 cylinder engine, no idea about the make. Its available for sale, but I am curious as to the make.

Cheers harit

Can it be a Hanseat ?
Please check this ( My post # 40 )

http://www.team-bhp.com/forum/commer...ml#post2586470

Sudarshan

[rdcm1985]

Some 15 years back I was inspecting a premises in Chennai to take on lease. Turned out to be a Auto Spares dealer was closing shop. While the purpose of my going there did not materialise, I did end up picking up his stock of Pistons / Rings / Engine Bearings / Gaskets, etc; mostly for 50s British Cars. There were also brand new carbs - Zenith C1246, Solex LC67 (26AC), Weber 85592 (281CP3). My invitation to interested enthusiasts was to check personally if what they needed was available and a friend even found a set of pistons for his M.G !!!. Not sure if I can scan the list -15 pages. Ideal if anyone is interested in the entire stock & help enthusiasts with parts otherwise difficult to source.

[deutscheafrikar]

Originally Posted by Sudarshan

Can it be a Hanseat ?
Sudarshan

Sudarshan you maybe correct there. did the hanseat bajaj have a copy of the DKW engine? It looks so similar. I had a owners manual too. In 1977 someone put the hanseat engine on a motorcycle and raced it at Juhu. I think Harit's photo is missing the coils etc... as shown in this engine which is supposed to be a DKW

[Collector]

Originally Posted by harit

This is supposed to be a 2 cylinder engine, no idea about the make. Its available for sale, but I am curious as to the make.

Cheers harit

That is the engine from the HANSEAT tempo the 3 wheeler front wheel drive transport vehicle that was the predecessor of the Matador.
You can still find many of these vehicles in rural Maharashtra though they have been desielised.
If the engine is for sale I am interested to take it

[IndrojitSircar]

While i was at a friend's workshop the other day he showed me he had picked up about 50 pairs of Fiat lenses made in Italy which are of no use to him.

The lenses are similar to the pic attached from Sonu's thread. These are Unused. They would cost about Rs.800per pair.

If anyone is interested please let me know and i am willing to help.

REgards

Indrojit
#9999134005

[Collector]

Originally Posted by rdcm1985

Some 15 years back I was inspecting a premises in Chennai to take on lease. Turned out to be a Auto Spares dealer was closing shop. While the purpose of my going there did not materialise, I did end up picking up his stock of Pistons / Rings / Engine Bearings / Gaskets, etc; mostly for 50s British Cars. There were also brand new carbs - Zenith C1246, Solex LC67 (26AC), Weber 85592 (281CP3). My invitation to interested enthusiasts was to check personally if what they needed was available and a friend even found a set of pistons for his M.G !!!. Not sure if I can scan the list -15 pages. Ideal if anyone is interested in the entire stock & help enthusiasts with parts otherwise difficult to source.

Hi,
I would be interested in anything for a 1950/51 Vauxhaull Wyvern. also if you want to sell as a lot do contact me on planter472002@yahoo.co.in or call me on 09344833274
regards
Arthur

[IndrojitSircar]

Originally Posted by rdcm1985

Some 15 years back I was inspecting a premises in Chennai to take on lease. Turned out to be a Auto Spares dealer was closing shop. While the purpose of my going there did not materialise, I did end up picking up his stock of Pistons / Rings / Engine Bearings / Gaskets, etc; mostly for 50s British Cars. There were also brand new carbs - Zenith C1246, Solex LC67 (26AC), Weber 85592 (281CP3). My invitation to interested enthusiasts was to check personally if what they needed was available and a friend even found a set of pistons for his M.G !!!. Not sure if I can scan the list -15 pages. Ideal if anyone is interested in the entire stock & help enthusiasts with parts otherwise difficult to source.

I am looking for a Solex 30PAAI single barrel down draught carburetor. If you have it in stock i would love to have it. It was common on some of the Mercedes 219 & 220S.

Please also beware of people on team-bhp claiming to buy bulk parts, making committments and then not paying up on time. Have faced this a number of times.

Regards

Indrojit Sircar

[srinand]

Originally Posted by rdcm1985

Some 15 years back I was inspecting a premises...

Hi Sir,

I would be interested in any Morris minor spares if available in your lot. Please do let me know, i have sent you a PM as well.

Thank you,

Srinand.

[deutscheafrikar]

Originally Posted by srinand

I would be interested in any Morris minor spares if available in your lot. Srinand.

Ahaa a moris minor...nice car, my dad had one in the late 60's early 70's. I'm sure I have 8 valves in one of the steel trunks in my garage. He had overhauled the engine back then and this must have been surplus.