Team-BHP - Review: RCD 330G. VW's 2016 Head-Unit for the Polo, Vento & Ameo
Team-BHP

Team-BHP (https://www.team-bhp.com/forum/)
-   In-Car Entertainment (https://www.team-bhp.com/forum/car-entertainment/)
-   -   Review: RCD 330G. VW's 2016 Head-Unit for the Polo, Vento & Ameo (https://www.team-bhp.com/forum/car-entertainment/173375-review-rcd-330g-vws-2016-head-unit-polo-vento-ameo-13.html)

Quote:

Originally Posted by ventoman (Post 4114096)
I've not been able to locate existing unit in my Vento.

Hi ventoman,

Its located on the left side within boot of Vento. Here is picture of the same, I believe your car will have the same module. This does not support OPS display.

Review: RCD 330G. VW's 2016 Head-Unit for the Polo, Vento & Ameo-opsmodule.jpg

As mentioned earlier you can buy either 4K module to support only rear sensors of 8K module if you plan to install front parking sensors. You will have to replace existing module with new one and route wire from 12 pin connector to CANBUS powertrain (BCM).

Regards.

Hey all,
I installed the 330 plus, and the rvc but when slotted into reverse i get a black screen showing brightness adjustment and '' look! Safe to move?", but no image :(

Review: RCD 330G. VW's 2016 Head-Unit for the Polo, Vento & Ameo-img_9298.jpg

Have you enabled the reverse cam option in VCDS?

Quote:

Originally Posted by KK_HakunaMatata (Post 4107715)
Hi Guys,

I have a question, and it is not related to Polo/Vento.

If I buy RCD 330G, will I be able to install it in my Toyota Corolla 2006? And if yes, will the steering controls also work with this?

I have the stock stereo now with 6 CD changer with steering controls, but I am missing features of USB, BT & Aux.

KK

Edit: Space there is sufficient for 5 inch system.


Quoting my own post. Please help on my query.

KK

Quote:

Originally Posted by KK_HakunaMatata (Post 4114520)
Quoting my own post. Please help on my query.

KK

Hi KK_HakunaMatata,

I believe this head unit might not be compatible with your car since this is CANBUS enabled. Several functions are dependent on CANBUS connection. Also I am not sure if this will fit in the OE location of your car.

Most of the folks using this in VW are doing this mainly for OE look and functions. You will have far more options in the aftermarket head units.

Regards.

Quote:

Originally Posted by leprechaun (Post 4114489)
but no image :(

Hi leprechaun,

Please try to click on this black/blank screen and see if you notice any disturbance in audio (radio/media playing on head unit) and then try to reset again.

Regards.

Quote:

Originally Posted by leprechaun (Post 4114489)
Hey all,
I installed the 330 plus, and the rvc but when slotted into reverse i get a black screen showing brightness adjustment and '' look! Safe to move?", but no image :(

Attachment 1587671

Try again with Boot and all doors closed. Happened with me also. If you don't close boot this happens. Hope it helps you.

Quote:

Originally Posted by maddyguage (Post 4114709)
Try again with Boot and all doors closed. Happened with me also. If you don't close boot this happens. Hope it helps you.


Hey Maddy, finally I got it working. Now the thing is, it works only once after the car is started. Like if I disengage reverse and engage it again, there's no change in the screen, the car has to switched off and back on for it work again.

Quote:

Originally Posted by leprechaun (Post 4114752)
Hey Maddy, finally I got it working. Now the thing is, it works only once after the car is started. Like if I disengage reverse and engage it again, there's no change in the screen, the car has to switched off and back on for it work again.

Kindly follow my thread here. You will get your answer. :D

Quote:

Originally Posted by maddyguage (Post 4110560)
Finally got my 6.5" RCD 330 plus. Screen is huge and touch is better than my previous 5" RCD 330 G. UI looks rich almost identical to bigger brother Jetta's MIB.

I got a sweet deal from seller and luckily it's cheaper than RCD 330 G.

I got it for $100 with free shipping by aramex (express shipping). I got my package within 5 days.

Congratulations the system looks very awesome. I have just booked my GT TSi which is due for delivery next week. Got lucky and didn't have to wait for it. Can you please PM me the link for the HU and the cables I might need for it to work?

Thanks.

Hi All,

I see a lot of people installing reverse camera in their Vento/Polo. Does using the Vagtune Setup mentioned in some of the earlier posts ( link here) creates any issues with the warranty?

Quote:

Originally Posted by dsinz (Post 4111569)
I got rear camera installed on my 2016 Polo GT TSI. It works flawlessly with RCD 330G unit which came as part of the car. I got it installed from Vagtune Bengaluru branch today. Took 45 mins to complete the setup. Sugesh and Ashraf of Vagtune was there in Bengaluru branch today.

Totally satisfied with the installation. I was happy with RCD 330G unit. I didnt want to change the head unit for the camera. They were able to install the camera with Park pilot on RCD 330G head unit.

Hello dsinz,
can you kindly share the address and / or contact numbers of Vagtune Bangalore? Thanks in advance.
Regards, Seshadri.

Hi guys wanted to know if on the rcd 330G can an amplifier be connected?

Guys,

Is there any way to enable Android Auto on the RCD 330G?

I had heard that VW had some "App Connect" package which enabled this?

Thanks

Quote:

Originally Posted by nova9 (Post 4192291)
Guys,

Is there any way to enable Android Auto on the RCD 330G?

I had heard that VW had some "App Connect" package which enabled this?

Thanks

Maybe helpful:
http://www.team-bhp.com/forum/car-en...it-mib-ii.html

Quote:

Originally Posted by itwasntme (Post 4192532)

Thanks, but i had already seen that thread before i posted. That thread talks about older versions of the passat/polo/vento.

My cars year of manufacture is 2016 and has mirrorlink, android auto however doesn't work.


All times are GMT +5.5. The time now is 05:01.