Team-BHP
(
https://www.team-bhp.com/forum/)
HU: 9K - Blaupunkt, Sony, Pio is there is a B&W
Components: 6K - JBL, Hertz Energy?, etc...
Quote:
Originally Posted by low_bass_makker Sir I did not understand what u said here .The pic above is a pic taken from the vega install done by autophile him self..... In that setup the sub were in the boot and the ports were firing in to the cabin........wait i will show u the complete pics......   
And the box volume is 17 x 17 x 13 which make the internal volume to be 44.9 liters. In which we will have to deduct the port volume and the sub displacement which will come to nearly to volume jb has asked.......
Also the port should me on the speaker side but in some situations port can be on the different side also.......
If any doubt please ask.......
|
You are comparing two different cars :
In Vega which is Lancer the subs are ES380 in 2cuft box. We used the ports in the top pf the box to get immediate bass inside the cabin. I very well know the placement of the ports, we do different things according to the customers needs.
Also there was no space for 3inch port on the subwoofer mounting baffle because of amplifier rack. Sometimes picture don't state the real situation of the installation. And because of constraints of space in car audio you cannot follow the so called theoretical explainations.
In Octavia its different subwoofers HXS380D (SPL Subwoofers) in 1.5 cuft enclosure. And the location where ports are installed in the boxes that was the only place where they could be installed. There is nothing like you cannot install the ports in corner, you can very well do that if you know how to calculate the specs, I happen to know them :)
[quote=Bass&Trouble]Mehul Mepani (a la AV Max)quote]
He is the funniest Audio Video reviewer I have ever come across in my life ;) .
Does that mean you like his sense of humour?
Quote:
Originally Posted by Autophile In Octavia its different subwoofers HXS380D (SPL Subwoofers) in 1.5 cuft enclosure. And the location where ports are installed in the boxes that was the only place where they could be installed. There is nothing like you cannot install the ports in corner, you can very well do that if you know how to calculate the specs, I happen to know them :)
|
Sir can u please enlighten me about how to calculate the major parameters while design a ported enclousre For eg volume, ported dia and port lenght, port location........
Also I am not pointing out a mistake, I am just asking why did u installed the port on the sub face side not the top or any other side. There must be some reason about it can u please share it with other people on this fourm.........
[quote=Autophile]
Quote:
Originally Posted by Bass&Trouble Mehul Mepani (a la AV Max)quote]
He is the funniest Audio Video reviewer I have ever come across in my life ;) .
|
Then you haven't met Yohan Contractor.
Quote:
Originally Posted by Sam Kapasi Does that mean you like his sense of humour?
|
Sam seems like you missed "winking smiley" in my post :)
Quote:
Originally Posted by navin HU: 9K - Blaupunkt, Sony, Pio is there is a B&W
Components: 6K - JBL, Hertz Energy?, etc...
|
that post by Navin was meant for anshu !
I thought Navin was quoting it for kb! a 6k compo for kb!lol:
Quote:
Originally Posted by jkdas I thought Navin was quoting it for kb! a 6k compo for kb!
|
:mad: .. nothing wrong with that... 6 k is a LOT of money for a compo you know!
Quote:
Originally Posted by kb100 6 k is a LOT of money for a compo you know!
|
Famous last words rl:
Ref: Mehul and Yohan. I am not commit my opinion! :-)
Ref: KBs system: KB a 6k component wont get the best out of your Tru Tech amp. I would suggest Infnity Perfect, Hertz Mille, Focal, ScanSpeak, etc..
Herts Mille is insanely expensive... the others.. is there a distributor in India? ... Is there anyplace one can give these a listen?
I would think JB and Gun distribute Mille. I have not heard them yet but I saw pics/catalog and I have a fair idea of what should atleast sound good.
I would say the Mille midbass is about the auto equivalent of the lesser ScanSpeak Revelator midbass. A lot of the technology developed by SS in the late 80s early 90s is deployed in the Mille. I think a google on SS's SD1 motor will tell more.
If B&T is following this thread...I'd like to see a midbass with a edge wound voicecoil, copper shroting ring, vented pole piece, NdFeb magnet system with the coil outside the magnet system coil dia = 1/2 cone dia, single spider till 6" and dual spider for 8"+, Butyl half roll high damping surround, cast or moulded frame, etc...
A bit OT, I have a Alpine TDA 7448E. HOw much can I expect for it if I wanna sell it?
Quote:
Originally Posted by jkdas A bit OT, I have a Alpine TDA 7448E. HOw much can I expect for it if I wanna sell it?
|
Isn't that a tape player?
| All times are GMT +5.5. The time now is 08:13. | |
