Making a DIY 3 way

DerAlte · 27th September 2009, 17:27

What happens when you disconnect the tweeter? Both the mid and tweeter go silent?

Tangential thinking: what happens if you short out the tweeter?

greenhorn · 1st November 2009, 11:21

found another mid which would fit in. Also found that the entire under dash is covered with some thick rubber/foam (damping?) sheet. Speaker fit when it was removed.

This is an 'Osaka' mid i got hold of for <200 a piece. Seems to be working fine. Vastly improved prescence, slightly honky when pushed to the limit, but totally worth it.

The crossover is 2x470uF connected in series

sorry for the lousy pix. My digicam seems to be acting up

27th September 2009, 17:27	#31
DerAlte Senior - BHPian Join Date: Mar 2007 Location: Bangalore Posts: 8,027 Thanked: 2,920 Times	What happens when you disconnect the tweeter? Both the mid and tweeter go silent? Tangential thinking: what happens if you short out the tweeter?
	() Thanks

1st November 2009, 11:21	#32
greenhorn BANNED Join Date: Apr 2007 Location: KL-01 Posts: 7,878 Thanked: 4,910 Times View My Garage	found another mid which would fit in. Also found that the entire under dash is covered with some thick rubber/foam (damping?) sheet. Speaker fit when it was removed. This is an 'Osaka' mid i got hold of for <200 a piece. Seems to be working fine. Vastly improved prescence, slightly honky when pushed to the limit, but totally worth it. The crossover is 2x470uF connected in series sorry for the lousy pix. My digicam seems to be acting up
	() Thanks