Team-BHP - DIY: The Short Shifter

Quote:

Originally Posted by risham (Post 2814311)

As i understand this you have shifted the fulcrum of the lever ( ball joint) towards the top end to achieve a short throw. So this should act sideways also. Is it so?

Theoretically it should, and does too, but somehow i feel the difference isn't noticeable. Just an illusion maybe.

Hi,

Has anybody done a Short Shifter mod on a Bolero NGT 520 Gearbox?
Is it possible? Is there any ready-made kit available? I basically want to bring up the lever a bit and reduce the throw.

I did come across this thread. http://www.team-bhp.com/forum/modifi...t-shifter.html

Thanks in advance.

-- Torqy

Quote:

Originally Posted by Torqy (Post 3850703)

If you can get me some pictures of the shifter assembly and linkages, i might be able to help. But then, the power needed for the Bolero NGT 520 gearbox is quite a bit even with the huge long shifter it has. It might be worse after the mod.

Quote:

Originally Posted by racerdabba (Post 3858297)

I figured the shifter does not go "straight" into the box. It goes to the left side of the box with two L bends before reaching the fulcrum....making it pretty complicated. I'll just live with it.

-- Torqy