Team-BHP - The Home Appliance thread

Quote:

Originally Posted by Jaguar (Post 3444574)

I am in the market for a new mixer-grinder/food processor. The 10 year old trusted philips one is showing signs of aging and I wanted to know what brand is good these days.

I'm guessing you have a 1631/1632. These are fantastic and still being made today. The jars and blades are available if that's what's "aged". Or you can buy the same design new.

Another brand with consistent reliability /quality is Panasonic.

Kenwood is the most expensive but has higher quality too.

Among Indian brands butterfly is good but blade designs in their entry level models are poor.

P. S. The above information is courtesy a friend who owns an electronics repair business and provides service /after sales support for all these brands except Kenwood

Need help in buying a front loading Washing Machine.
Shifting house & wifey insists on it
My requirements
Front loading fully automatics 6kgs (we are 2 adults & 2 small kids)
went through the thread would prefer direct drive one from LG, but IFB doers not have direct drive type
would like to finalise between LG & IFB,
Pls help with inputs

Quote:

Originally Posted by GSMINC (Post 3445704)

would like to finalise between LG & IFB,
Pls help with inputs

LG would win hands down against IFB. The product quality and after sales service is much better with LG. Go for the direct drive model.

Quote:

Originally Posted by GSMINC (Post 3445704)

went through the thread would prefer direct drive one from LG, but IFB doers not have direct drive type
would like to finalise between LG & IFB,
Pls help with inputs

IFB does have direct drive models and we have three IFB's within the family (the oldest being 15 years old and the youngest being a little over two years old).

The oldest machine is not a direct drive and has had its belt and door's rubber seal replaced once - service quality was ok. The newer ones are direct drives and haven't need any service yet.

I for one am not sure if LG is really better - I bought a side by side LG refrigerator and had to get the delivered refrigerator replaced thrice because of fit and finish issues (on the top side of the refrigerator body).

Quote:

Originally Posted by GSMINC (Post 3445704)

I will suggest to skip IFB. The current generation IFB is not of the same make as the old gen. The old gen IFB used to have Bosch parts and was reliable and long lasting. Even we have 15yr old IFB still running fine with occasional service. I have LG DD too for past couple of years and the quality seems to be fine.

Quote:

Originally Posted by CrackedHead (Post 3445785)

Just checked with IFB guys,
thay have stopped production of direct drive models,
spoke to LG guys also
both LG & IFB sales guys claim their products are the best (obviously)
unable to decide

Quote:

Originally Posted by GSMINC (Post 3446633)

both LG & IFB sales guys claim their products are the best (obviously)
unable to decide

Go with LG eyes closed. I had an IFB which was plagued with issues all through the 3 years it was under warranty. Everything except the outer shell needed replacement. You can read IFB horror stories in this thread itself. Switched to LG direct drive around 2 years ago and have been happy ever since.

Quote:

Originally Posted by drsingh (Post 3445245)

Thanks. I am not too sure about the model number but like you said, it is still available in the market. Not going for the same design since we are looking for more features like juicer, chopper etc.

Sorry, I couldn't find a better forum for this query.

We have these Havells thin tube light fixtures in our house and in one of the fixtures the tubelight recently reached end of life.

Now, I've replaced tubelights all my life but I can't seem to figure out how to remove the tube out of this fixture. When I twist the tube I hear the typical click followed by the tube coming loose, but there are these plastic things at both ends that seem to be preventing it from coming out.

How do I remove the tube out of this fixture? I don't want to apply too much force at any point as the tube might break. Here are the pictures of the plastic end:

The Home Appliance thread-img_20140604_191402687.jpg

The Home Appliance thread-img_20140604_191436790.jpg

Thanks guys, I was pretty sure something had to slide here but couldn't figure out what.

But after your encouragement I slid a flat screw driver in a couple of places (see image) I could see 2 grooves running along the plastic cap. A little of prying force and I could take the cap out with my hands. Taking one of the caps was enough to remove the tubelight out of the fixture.

Case solved. Thanks!

The Home Appliance thread-img_20140605_105732978.jpg

Quote:

Originally Posted by sgiitk (Post 3444689)

@Jaguar; I swear by Kenwood. My K-chef lasted over 20 years and had to be dumped since the blades on the liquidizer packed up. I have a new one now. They do have a cheaper model which is also brilliant.

I am also in need of Mixer/Grinder. I did check Kenwood models but they look like an overkill for my home's needs. We need a mixer grinder that can chop, mince and grind (wet/dry) in smaller quantities. I have a Sumeet at home but even though it is still working (for 24 years now) and does its job, it is no longer as eager as before. The blades have lost that edge. Need something as a replacement. Down her Preethi and Butterfly are the most popular models but I am not sure of their reliability. Need one which is reliable and not expensive to maintain (read parts / replacement)

I can suggest you once mixer-grinder that I am using since last year. It is supremely powerful (1000W motor). Only Preethi makes a more powerful model at 1200W, but that looks industrial.

http://www.preethi.in/xpro.asp

It does everything in 3-4 seconds including making dosa/idli batter in small quantities.

It's a bit expensive, yes, but way too powerful.

http://www.elgiultra.com/website/pro...xer%20Grinders