my modified Suzuki Swift

m4ugr8 · 5th August 2007, 17:53

lovely car
how much did the kit cost???

rjstyles69 · 5th August 2007, 20:10

drool drool.. Yummy nice body kits. Fill up the rear bumper with some mesh, the part below the end can. Looks like its designed for gymnasts to take a leap.

Whats the body kit made of ?

desigNation · 6th August 2007, 10:31

i think the front end looks nice,the workmanship is good, but went a bit overboard in deisigning, the over all affect looks a bit heavy,the black eyelid sticker on the light could have been avoided , as well as the side skirts have too much of openings,the back skirts too is got much of cuts and openings, dont know why two exhaust openings are given?the greddy sticker is too loud,go for a slightly smaller sticker.the front end is not bad the workmanship is good.,please do complete the front with with the mesh job and i think the black matt finish sticker job on the top is really outdated now.a good mod job on a swift can be seen on the kitup site, not all are great designs[like the jaw dropping look of the swift which i think is really weird]but some of their work is really great.please check it out.

aks_karthik · 6th August 2007, 10:55

Hey this is wonderful.I too planned to Mod a New Vdi
But Painted Side skirts seems to be diff color with OEM.
May be the problem in the snaps.
How much did you spend?

6th August 2007, 11:49

Really awesome ride! put a dummy muffler tip in the rear, remove the sticker from the wind shield, put the meshes...and you would have yourself a "kaint" ride...

archerdyal · 6th August 2007, 20:35

Thanks,
RJ:-Thanks RJ for ur suggestions....I appreciate it....
Karthik:-Well there is a problem in the photograph i guess...I have spent around 40k on the body kits and Paint

rjstyles69 · 6th August 2007, 21:29

No problemo mate

. My query still remains unanswered " Whats the body kit made of ? ".

ashutoshb · 6th August 2007, 23:43

* the matt roof is looking awesome!

* black and red scheme looking really good!
* front bumper a clean neat design.. gels with the rest of the body.
* good tyre-rim combo chosen.
* rear bumper and side skirts too cluttered in my opinion.
* are you planning to add a twin exhaust setup? cuz the other hole in the rear bumper is not looking good!
* are those small number plates legal? ya jalandhar mein sab chalta hai?

captainsokhi · 7th August 2007, 15:39

hi arsh
man, didnt knw it ws ur car...
saw the 2 days back.....
it looks nice........

speedmiester · 7th August 2007, 15:54

Nice Ride and very tastefully done. enjoy ur ride

Kratos · 7th August 2007, 15:54

Dude Ur Bodykit Looks Awesome...more Like D One In Swift Sport!jus Booked A White Swift,can U Let Me Know Were Will I Get Them In Chennai...

archerdyal · 8th August 2007, 15:07

HI,
HI RJ Sorry I forgot answer ur query....its made of FRP(Fiber reinforced Plastic).....

ashutoshb:-Thanks for ur suggestions and appreciations.Yeah i am planning to a Rear tail light in the second exhaust port

Captain Sokhi:-Thankx Cap for ur appreciation

Kratos:-thanks for commenting...well i can ship them to you...u ill not get this kit elsewhere

Akshay1234 · 8th August 2007, 19:44

Quote:

Originally Posted by archerdyal

HI,
HI RJ Sorry I forgot answer ur query....its made of FRP(Fiber reinforced Plastic).....

ashutoshb:-Thanks for ur suggestions and appreciations.Yeah i am planning to a Rear tail light in the second exhaust port

Captain Sokhi:-Thankx Cap for ur appreciation

Kratos:-thanks for commenting...well i can ship them to you...u ill not get this kit elsewhere

dont get a tail pipe in the 2nd exhaust port. just put a dummy exhaust tip. itll look much better.

Harrie · 9th August 2007, 06:39

Quote:

Originally Posted by archerdyal

HI,
HI RJ Sorry I forgot answer ur query....its made of FRP(Fiber reinforced Plastic).....

You sure about this? Or is it fibre glass?

archerdyal · 9th August 2007, 08:18

HI harrie,
Basically it is fibre glass and The raisen is the plastic.....

5th August 2007, 17:53	#16
m4ugr8 Senior - BHPian Join Date: Jul 2007 Location: New Delhi Posts: 1,291 Thanked: 129 Times View My Garage	lovely car how much did the kit cost???
	() Thanks

5th August 2007, 20:10	#17
rjstyles69 Senior - BHPian Join Date: Sep 2006 Location: Bengalooru.. Posts: 4,343 Thanked: 842 Times View My Garage	drool drool.. Yummy nice body kits. Fill up the rear bumper with some mesh, the part below the end can. Looks like its designed for gymnasts to take a leap. Whats the body kit made of ?
	() Thanks

6th August 2007, 10:31	#18
desigNation BHPian Join Date: Dec 2006 Location: calicut Posts: 661 Thanked: 51 Times View My Garage	i think the front end looks nice,the workmanship is good, but went a bit overboard in deisigning, the over all affect looks a bit heavy,the black eyelid sticker on the light could have been avoided , as well as the side skirts have too much of openings,the back skirts too is got much of cuts and openings, dont know why two exhaust openings are given?the greddy sticker is too loud,go for a slightly smaller sticker.the front end is not bad the workmanship is good.,please do complete the front with with the mesh job and i think the black matt finish sticker job on the top is really outdated now.a good mod job on a swift can be seen on the kitup site, not all are great designs[like the jaw dropping look of the swift which i think is really weird]but some of their work is really great.please check it out.
	() Thanks

6th August 2007, 10:55	#19
aks_karthik Senior - BHPian Join Date: Sep 2005 Location: Chennai Posts: 1,947 Thanked: 341 Times View My Garage	Hey this is wonderful.I too planned to Mod a New Vdi But Painted Side skirts seems to be diff color with OEM. May be the problem in the snaps. How much did you spend?
	() Thanks

6th August 2007, 11:49	#20
vidvai Posts: n/a	Really awesome ride! put a dummy muffler tip in the rear, remove the sticker from the wind shield, put the meshes...and you would have yourself a "kaint" ride...
	() Thanks

6th August 2007, 20:35	#21
archerdyal BHPian Join Date: Feb 2007 Location: Jalandhar Posts: 48 Thanked: 0 Times	Thanks, RJ:-Thanks RJ for ur suggestions....I appreciate it.... Karthik:-Well there is a problem in the photograph i guess...I have spent around 40k on the body kits and Paint
	() Thanks

6th August 2007, 21:29	#22
rjstyles69 Senior - BHPian Join Date: Sep 2006 Location: Bengalooru.. Posts: 4,343 Thanked: 842 Times View My Garage	No problemo mate . My query still remains unanswered " Whats the body kit made of ? ".
	() Thanks

6th August 2007, 23:43	#23
ashutoshb Senior - BHPian Join Date: Jul 2006 Location: NOIDA Posts: 1,756 Thanked: 4,288 Times View My Garage	my feedback * the matt roof is looking awesome! * black and red scheme looking really good! * front bumper a clean neat design.. gels with the rest of the body. * good tyre-rim combo chosen. * rear bumper and side skirts too cluttered in my opinion. * are you planning to add a twin exhaust setup? cuz the other hole in the rear bumper is not looking good! * are those small number plates legal? ya jalandhar mein sab chalta hai?
	() Thanks

7th August 2007, 15:39	#24
captainsokhi BHPian Join Date: Aug 2005 Location: Jalandhar, PUNJAB Posts: 171 Thanked: Once View My Garage	hi arsh man, didnt knw it ws ur car... saw the 2 days back..... it looks nice........
	() Thanks

7th August 2007, 15:54	#25
speedmiester Senior - BHPian Join Date: Jul 2006 Location: bangalore Posts: 2,387 Thanked: 6,631 Times	Nice Ride and very tastefully done. enjoy ur ride
	() Thanks

7th August 2007, 15:54	#26
Kratos Newbie Join Date: Aug 2007 Location: CHENNAI Posts: 1 Thanked: 0 Times	Dude Ur Bodykit Looks Awesome...more Like D One In Swift Sport!jus Booked A White Swift,can U Let Me Know Were Will I Get Them In Chennai...
	() Thanks

8th August 2007, 15:07	#27
archerdyal BHPian Join Date: Feb 2007 Location: Jalandhar Posts: 48 Thanked: 0 Times	HI, HI RJ Sorry I forgot answer ur query....its made of FRP(Fiber reinforced Plastic)..... ashutoshb:-Thanks for ur suggestions and appreciations.Yeah i am planning to a Rear tail light in the second exhaust port Captain Sokhi:-Thankx Cap for ur appreciation Kratos:-thanks for commenting...well i can ship them to you...u ill not get this kit elsewhere
	() Thanks

9th August 2007, 08:18	#30
archerdyal BHPian Join Date: Feb 2007 Location: Jalandhar Posts: 48 Thanked: 0 Times	Hi... HI harrie, Basically it is fibre glass and The raisen is the plastic.....
	() Thanks