Originally Posted by bkbkr1212 (Post 2007598)

Hi Navin/Nirmal,
Thanks for that. Yup, I'll upload the pics.
In low beam, I noticed there's a bit of scattering.
It's OK,right? Am I right in assuming that the reason for scattering could be not having projector assembly.

Nirmal,
Too much scattering, would it attract police attention here in Bang? :)

Originally Posted by kingofmyworld (Post 2006069)

Hey guys,

Got my Hella projector fogs yesterday.. Started installing them in the morning and it was done by noon. It was a hectic job to install them in my bumper, It needed some cutting and stuff but no cut was visible after installing them.. Throw is good and the cutoff line is sharp, Check the pictures attached, These pics were clicked at 6pm So there was still osme light around, I'll click some day and night pics later.

( Upgrade halogens to HId in the projectors? Worth it? )

Originally Posted by nirmaljusdoit (Post 2007432)

Naveen - Tried searching for the right thread about the 4300 K vs 6000 K comparison but couldn't get it, could you please paste the right one here ? Would be interesting to see the comparison pics !

Originally Posted by driving_smartly (Post 2007821)

Good light throw. I was looking for fog lights for my Santro as well.
How much did it cost you ?
what is the specification of these fog lights did it require any relay ?

Originally Posted by trrk (Post 2007854)

Hi,



This is what you are looking for:

http://www.team-bhp.com/forum/team-b...ml#post2006478

Be patient! The ones that you want are at the end of the post.

Hope this helps.

Originally Posted by bkbkr1212 (Post 2007598)

Hi Navin/Nirmal,
Thanks for that. Yup, I'll upload the pics.
In low beam, I noticed there's a bit of scattering.
It's OK,right? Am I right in assuming that the reason for scattering could be not having projector assembly.
Nirmal,
Too much scattering, would it attract police attention here in Bang? :)

Hey Navin,
Do you know anyplace in Trichur where they do projector setup?
My hometown is Palakkad. I'll be there in the 1st week of Sep.

Thanks in advance,
Binu


Regards,
BR

Originally Posted by nirmaljusdoit (Post 2008574)

Thanks ! Very informative, projectors definitely do make quite a difference in making all the light output very much usable ! The light is more even on the road, was hoping someone does this comparison !

King of my world - The effect is really neat :) how about the safety aspect of installing them like that, any danger from small stones thrown up while driving ? Water entry during monsoons, etc ?

Originally Posted by nirmaljusdoit (Post 2007700)

There will be a bit of scattering, which is normal. If you have a projector assy, then the light will of course be much better focused.

I haven't been questioned about it even once ! I see the cops are more worried about drunken driving than bright headlights :D
You've upgraded to the 4300 K right ? that is more on the yellowish side, so shouldn't be any concerns i guess !

Originally Posted by naveen.raju (Post 2008629)

Binu:

This is because you dont have projectors. Try not to flash them or use high in city drives.
I dont think custom projector setup is carried out anywhere in Kerala. The best place in Kerala would be Cochin/Trivandrum. But I have seen only readymade kits here. No custom DIY kits here. For that I think Bangy would be right choice. Else, you can ship them from Delhi.

Originally Posted by bkbkr1212 (Post 2008664)

Hi Nirmal,
I installed 6000K . Called up AK Traders, JC Road and Philips guys.
Both of them said they have stopped manufacturing 4300K.
AK Traders guys went on to the extent that all Philips automotive lighting products are RTO approved.
You know any place in Bangalore ( you had mentioned Sprocket) where I can buy projector assembly kit.
One of our fellow BHPians (Mr.Nobody) has a spare bi-xenon projector kit. Are the projector assembly kits same for H1, H4 and other variants of bulbs. I remember either you or Navin mentioning about different projector assembly for H1 and H4 types of bulbs.
Unless and until I am very sure I don't want to invest 5K+ amount.
Also I need to find a good mechanic too.



Hi Navin,
I don't think I can do it on my own. Not very adept at these kind of stuff.
Do you mean you have seen ready made projector kits in Cochin? Could you please let me know the details of the shop?
Please send me the details of Delhi shops too, if you have.

Thanks guys,

BR

Originally Posted by naveen.raju (Post 2008737)

@BR
In Bangy, you have Sprocket.
You will have to check whether the existing HIDs will fit the spare Projector setup. Projector setup will have different bulb configurations. So make sure that they fit. But that's not all. Since this is just a Projector assembly, you will have to install them to your existing headlight assembly. You will need one very talented mechanic for this. So make sure you find one such installer before going in.

I havent seen any readymade SX4 Projectors in Cochin or rather, anywhere in India. But have seen few in Singapore market.
Try to contact Mr. Yatharth at +919873984765, +919873484422
Info@performancezone.co.in
Showroom
53 (Part),Commercial Complex, South Patel Nagar,
Near Patel Nagar Metro Station, New Delhi-110008
They are into custom projector headlights.
Else, you can source some readymade SX4 projector from the Asian market. Try google and you will find many shops in Singapore, Malaysia offering shipment of these.

Originally Posted by kingofmyworld (Post 2006069)

Hey guys,

Got my Hella projector fogs yesterday.. Started installing them in the morning and it was done by noon. It was a hectic job to install them in my bumper, It needed some cutting and stuff but no cut was visible after installing them.. Throw is good and the cutoff line is sharp, Check the pictures attached, These pics were clicked at 6pm So there was still osme light around, I'll click some day and night pics later.

( Upgrade halogens to HId in the projectors? Worth it? )