Modified Indian Bikes - Post your pics here

kkr2k2 · 13th November 2006, 16:14

the air scoop looks like a kangaroo's pouch.... so what are you going to carry in it ... lol

Quote:

Originally Posted by karizma_devil

hey guys check out my karizma..what do u all think??

nosfreak · 28th November 2006, 00:48

Quote:

Originally Posted by nikkibike

Thanks Karthik, planning to MOD the fairing further!! Thanks for your inputs!!
Hope to meet you during the Tvm Meet!!

Done wid with the porting

?

Yusha · 30th November 2006, 21:38

Cool bike, Nikkibike. It will look better if you throw out those hideous footrests and get some nice rearsets for the bike. Also why have you written Kawasaki on the tank? It would have looked equally cool without that with those red graphics.

nikkibike · 2nd December 2006, 08:18

nosfreak, porting?! can you pl shed some light on that!!! Am unaware of portings in 4strokes

!!!

Yusha, What you mea by saying rear set?!! I didn't get that....! Well... Kawasaki is given to make a visual impact on first sight!!

what say?!

Continue your suggetions please...

pinneparayam · 3rd December 2006, 05:20

[img=http://img43.imagevenue.com/loc481/th_03333_Enfield_Overhaulinggoject_136_123_481lo.J PG]

I did some microsoft ''paint''job for you

Quote:

Originally Posted by cal

My Ride Enfield Bullet 500cc.....few more Mods comin in two months....quad exhaust, white gauges, 150rear tire...comments...

samybravo · 4th December 2006, 23:00

hi guys herz our new mode. itz a 2002 model pulser.we did this mode for our friend.since he said he needs only look and not performance we thought of fixin that sexy tyre many said itz not so gud for the bike any way we fixed it.the bike has a top speed of just 90 and less but it handles well.but it crawls abt 30 sec to reach 90,we know itz a big strain for the bike .im sure it cant climbe hill with two ppl on it so if he needs more performance i thought of convertin it to 180 cc,iv got sone stock 180 cc barrel and piston but never tried to fix it but ppl tell me is it possible to convert soon we will be upgradin the front tyre to 100/90-17 .so ppl tell me howz it .

.

samybravo · 4th December 2006, 23:16

herz another bike itz a suzuki fiero 2000 model the mods was done in chennai some where near jp road.this guy moded this bike long back (5 yrs ago) it looks ok to me but it realy handles well has a lot of power like he does wheely and sometimes stopee too .this was the first suzuki fiero i rode now i like the bike even though the stock looks ok but the engin is realy good i think itz one of the very best 150 segment engine .we fixed the disc(pulser) and did some overhaoling alone and some painting(those black & white stripes).but the stupid thingz that the bikes exhaust cant be seperated the mechanic who did the exhaust actualu welded the exhaust to the frame.so if the engine needs to be repared we got to cut the pipe and then unscrew the pipe from the head.

.

Yusha · 18th December 2006, 01:52

Rear sets are front footrests with the controls for gear and the rear brake. They are installed towards the rear of the bike to give it better looks and more importantly more ergonomic. You must have seen pics of R1's etc. Take a look at their rider foot rests. You will get what i am on about then.

jkdas · 19th December 2006, 21:18

Quote:

Originally Posted by cal

My Ride Enfield Bullet 500cc.....few more Mods comin in two months....quad exhaust, white gauges, 150rear tire...comments...

its an AVL? and 150/18?

nah, old 500 modded

Sankar · 19th December 2006, 21:44

It cant be an old 500 it's a new one as i can see the air injection thingy on the exhaust pipe. It's not an AVL.

prince_pervez · 10th January 2007, 11:35

Dudes Can you Guess which Bike this was ?
You'll Be surprised!!
At Least i Was!
Also Guess the Price for which this was modified.

samybravo · 10th January 2007, 22:07

i think itz a pulser old model cause the rear shocks resembles it.the price would be around 15k i think nice mode

Nitin · 10th January 2007, 23:01

pretty good job there! Is it a Yamaha ( dont quite remember the model #/name) ..not the 135.

men_in_jean · 10th January 2007, 23:28

Samy,
The pulsar and F2 looks simply great.. but the bikes are really crying for alloy wheels and a little broader tyre on the front.. Good job. How much would it cost to do such a modification?

desigNation · 11th January 2007, 10:09

cal, i jus saw u'r bike pics , good to know you didnt over do it,the color, the handle bar, the lights everything is good, 1 suggetion, the crash gaurd looks 2 loud,which spoils the look of otherwise a beautifully modded bullet,why dont you go for a simple steel rod[of course chromed].if u really into bullet modifying please check out the site Vardenchi

30th November 2006, 21:38	#243
Yusha BHPian Join Date: Nov 2006 Location: Mumbai Posts: 222 Thanked: 232 Times	Cool bike, Nikkibike. It will look better if you throw out those hideous footrests and get some nice rearsets for the bike. Also why have you written Kawasaki on the tank? It would have looked equally cool without that with those red graphics.
	() Thanks

2nd December 2006, 08:18	#244
nikkibike BHPian Join Date: May 2006 Location: QoAS Posts: 526 Thanked: 4 Times	eh!! nosfreak, porting?! can you pl shed some light on that!!! Am unaware of portings in 4strokes !!! Yusha, What you mea by saying rear set?!! I didn't get that....! Well... Kawasaki is given to make a visual impact on first sight!! what say?! Continue your suggetions please...
	() Thanks

4th December 2006, 23:00	#246
samybravo BHPian Join Date: Feb 2006 Location: Madurai Posts: 121 Thanked: 2 Times	all most finished hi guys herz our new mode. itz a 2002 model pulser.we did this mode for our friend.since he said he needs only look and not performance we thought of fixin that sexy tyre many said itz not so gud for the bike any way we fixed it.the bike has a top speed of just 90 and less but it handles well.but it crawls abt 30 sec to reach 90,we know itz a big strain for the bike .im sure it cant climbe hill with two ppl on it so if he needs more performance i thought of convertin it to 180 cc,iv got sone stock 180 cc barrel and piston but never tried to fix it but ppl tell me is it possible to convert soon we will be upgradin the front tyre to 100/90-17 .so ppl tell me howz it . ..
	() Thanks

4th December 2006, 23:16	#247
samybravo BHPian Join Date: Feb 2006 Location: Madurai Posts: 121 Thanked: 2 Times	herz another herz another bike itz a suzuki fiero 2000 model the mods was done in chennai some where near jp road.this guy moded this bike long back (5 yrs ago) it looks ok to me but it realy handles well has a lot of power like he does wheely and sometimes stopee too .this was the first suzuki fiero i rode now i like the bike even though the stock looks ok but the engin is realy good i think itz one of the very best 150 segment engine .we fixed the disc(pulser) and did some overhaoling alone and some painting(those black & white stripes).but the stupid thingz that the bikes exhaust cant be seperated the mechanic who did the exhaust actualu welded the exhaust to the frame.so if the engine needs to be repared we got to cut the pipe and then unscrew the pipe from the head...
	() Thanks

18th December 2006, 01:52	#248
Yusha BHPian Join Date: Nov 2006 Location: Mumbai Posts: 222 Thanked: 232 Times	Rear sets are front footrests with the controls for gear and the rear brake. They are installed towards the rear of the bike to give it better looks and more importantly more ergonomic. You must have seen pics of R1's etc. Take a look at their rider foot rests. You will get what i am on about then.
	() Thanks

19th December 2006, 21:44	#250
Sankar Senior - BHPian Join Date: May 2005 Location: Location Posts: 5,766 Thanked: 9,059 Times	It cant be an old 500 it's a new one as i can see the air injection thingy on the exhaust pipe. It's not an AVL.
	() Thanks

10th January 2007, 11:35	#251
prince_pervez Senior - BHPian Join Date: Dec 2006 Location: Redwood shores, CA, USA Posts: 4,210 Thanked: 51 Times View My Garage	Guess the Bike! Dudes Can you Guess which Bike this was ? You'll Be surprised!! At Least i Was! Also Guess the Price for which this was modified.
	() Thanks

10th January 2007, 22:07	#252
samybravo BHPian Join Date: Feb 2006 Location: Madurai Posts: 121 Thanked: 2 Times	nice dude i think itz a pulser old model cause the rear shocks resembles it.the price would be around 15k i think nice mode
	() Thanks

10th January 2007, 23:01	#253
Nitin Senior - BHPian Join Date: May 2006 Location: Houston, Texas Posts: 3,294 Thanked: 20 Times View My Garage	pretty good job there! Is it a Yamaha ( dont quite remember the model #/name) ..not the 135.
	() Thanks

10th January 2007, 23:28	#254
men_in_jean BHPian Join Date: Dec 2006 Location: Chennai Posts: 68 Thanked: 0 Times	Samy, The pulsar and F2 looks simply great.. but the bikes are really crying for alloy wheels and a little broader tyre on the front.. Good job. How much would it cost to do such a modification?
	() Thanks

11th January 2007, 10:09	#255
desigNation BHPian Join Date: Dec 2006 Location: calicut Posts: 661 Thanked: 51 Times View My Garage	cal, i jus saw u'r bike pics , good to know you didnt over do it,the color, the handle bar, the lights everything is good, 1 suggetion, the crash gaurd looks 2 loud,which spoils the look of otherwise a beautifully modded bullet,why dont you go for a simple steel rod[of course chromed].if u really into bullet modifying please check out the site Vardenchi
	() Thanks