![]() |
Originally Posted by Sphere
(Post 5743680)
Hello all, I have my first service for the safari coming up. I have faced no issues till date (touch wood) and my purchase and driving experience has been all good. I have read that the lane departure warning in the new software update causes an issue on the MID. Can anyone please tell me the changes in the latest software update because I use navigation quite often and if it changes to driver attention every time I change a lane, it will be quite an issue. I won't get the software updated if I don't find value in the updates. Regards, Sphere |
Originally Posted by spaceunicorn
(Post 5739536)
3. Unresolved Existing Issues: The FM reception is still poor, and the rear AC can't be switched on from infotainment system. |
Originally Posted by Thinking_Slow
(Post 5748651)
Noticed this weird driver seat behavior recently. The easy entry/exit feature (where seat goes low for easy ingress/egress) seems to be inefficient. If one stops ignition and opens the door, the seat goes low. But it comes back up as soon as the door is closed. Should it not remain low so that when driver re-enters, it does not have to use the battery to go low again? |
Originally Posted by DroopyGarfield
(Post 5748662)
The seat goes low when the driver exits and locks the door. However, when the driver reopens the door next time after unlocking, the seat again goes low and makes ingress easier. Have seen the same behavior in Harrier, I believe the implementation would be similar in Safari. |
Originally Posted by Sphere
(Post 5746515)
Can anyone please help me with this. |
Originally Posted by DroopyGarfield
(Post 5748662)
The seat goes low when the driver exits and locks the door. However, when the driver reopens the door next time after unlocking, the seat again goes low and makes ingress easier. |
Originally Posted by Thinking_Slow
(Post 5748840)
That was the point in my post. Moving the seat back up after egress is unnecessary because then it has to be moved down again for ingress. |
Originally Posted by northstar*
(Post 5748849)
Basically the car does not know / does not sense if you had open the door for an entry or exit. So it just repeats the process all the time. |
Originally Posted by flameofforest
(Post 5740853)
Although, have faced issues with instrument cluster getting stuck with 0s (restart of the instrument cluster restored it), and wireless Android Auto connecting/disconnecting repeatedly. |
Originally Posted by The_Warrior
(Post 5751502)
Anybody facing issue with AC. Whether it is in Internal Circulation or External the compressor trips after some running and then it starts blowing hot air. Recently i noticed that this happens when the AQI is in the range of 1-10. Anybody else faced this issue? |
Originally Posted by FLYBOYSID
(Post 5752720)
Sorry not a very helpful reply. Never faced this issue in my pre facelift. Where do you get AQI of 1-10 :uncontrol |
Originally Posted by The_Warrior
(Post 5753397)
Post Face Lift they have added a Air Purifier so you can monitor the AQI in the car. |
All times are GMT +5.5. The time now is 14:51. |