Originally Posted by ashishy (Post 5015945)

Looking for the cap of windshield wiper water inlet for Brezza. Is it available separately?

Originally Posted by pdpyen (Post 5016320)

Hello, assuminng your model is a Brezza 2016-19

Originally Posted by deep4u (Post 5012207)

Hello Shashi,

We took delivery of S-Presso VXI+AGS last week. This was intended for my sister who is still learning driving. On the very next day after taking delivery, an accident occurred where the right ORVM collided with ORVM of an Innova (Yup...It happened. This car is quite high). While nothing happened to the outside shell (just a minor scratch in clear coat), due to the impact the mirror inside fell off. :disappointed

We enquired with different Maruti dealers near our area and none of them had the mirror available with them. It had to be ordered and they said it would take 7 days. But now even after 7 days, the part has not yet come and also they are unsure when it will reach here since it has to come from Maruti. Even the registration of the vehicle is on hold due to this issue.

Does the mirror from any other Maruti models suit S-Presso? The model of mirror is one with an internal knob to adjust. Only the mirror came off and the mirror assembly is fine. Any help would be appreciated.

Originally Posted by Traveler (Post 5013855)

Dear Shashi,

The MGP Dealer has quoted a different part number for the Clutch Release Bearing.

23265-65G00 - Rs. 2434

Can you please check and let me know if both these are same and interchangeable. There is a big difference in price. As per him the part number that you provided is for Maruti Alto.

My car is a Baleno Sedan Vxi 1.6L Petrol 2006 model.

Thanks

Originally Posted by tharian (Post 5013865)

Wanted to confirm if the Swift's front shock absorber comes as a set which includes the dampers, coil spring and bearing or are each part available separately? This is for a 2005 model.

Originally Posted by ptaneja (Post 5015891)

Guys,
My Ciaz gear knob is all worn out and I am thinking of replacing it. Any of the available knobs will fit, or it has to be Ciaz original knob only ?
I was thinking installing Swift Automatic gear knob instead lol:

Originally Posted by govigov (Post 5016292)

Hello Leo,

Can you help me with the following?

1. part number for the gear knob on the 1.3 scross
2. part number for the parts manual, 2016 1.3 scross?

Regards,
govigov.

Originally Posted by Leoshashi (Post 5016642)

No Idea if automatic gear knob will fit, if you manage to do then please update us.

Originally Posted by Leoshashi (Post 5016642)

Even I was thinking that Baleno will be using different SGP release bearing which other G series cars like Zen/Esteem uses. But in Parts manual and Online, Maruti mentions part compatible with Alto to be compatible with Baleno as well. Hence my recommendation.

Originally Posted by Traveler (Post 5016917)

Hi Shashi, I have gone with your recommendation only. Hopefully it will be compatible. Will let you know once everything arrives.

Originally Posted by Leoshashi (Post 5016922)

Hope so. If you are ordering from Boodmo, order both. SGP(which shopkeeper says) as well as MGP part(which I recommended). I don't want you to run around once gearbox is removed in search of a compatible release bearing. Return the one which is unused. :)

You may do the same from local MGP store, just make sure they agree to returning the unused part.

Regards,
Shashi

Originally Posted by Traveler (Post 5016924)

Thanks Shashi, I will order the same. However the part number
23265-65g00 that was suggested by the dealer shows up as a Release Bearing for the 1.3 L Esteem on Boodmo.

https://boodmo.com/catalog/part-releaser-5396326/

Should I still order it?

Originally Posted by Leoshashi (Post 5016935)

Yes order both bearings, the one I said and the one dealer recommends. Return the one which isn't used. Sometimes experience(MGP dealer's) triumphs all parts manuals/EPCs(there have been cases of compilation errors). We both have a belief, let's see which one wins. :)

The one EPC/Parts manual recommends and this SGP part aren't interchangeable. That's why I told you to procure both before bringing the GB down.

Also keep us posted on which bearing eventually goes in.

Regards,
Shashi

Originally Posted by setuniket (Post 5017043)

Hi,

I am looking for Windshield Wiper Blade Set for CIAZ Alpha 1.5L Petrol MT.

TIA


Setu

Originally Posted by setuniket (Post 5017043)

Hi,

I am looking for Windshield Wiper Blade Set for CIAZ Alpha 1.5L Petrol MT. Boodmo catalogue has single wiper blade and not the set(OEM). Please share the part number for the set or part number of both the blade.

How come Bosch 16" is for Rs. 282 and OEM Blade is for Rs. 425/525?

TIA


Setu