![]() |
Originally Posted by self_driven
(Post 5213608)
Hi Shashi Can you please help me with part number and price of rear fog lamp assembly for the 2nd gen pre-facelift Swift. Thanks! |
Originally Posted by Leoshashi
(Post 5207567)
Control panel is separate and backlighting mechanism is separate, you need just the outer part? |
Originally Posted by sac23
(Post 5217596)
Hi, I was trying to purchase an oil filter for Ignis 2018 with a K12B engine from boodmo. There are filters from a lot of manufactures available there. Namely, Purolator, Mahle, Hella, ZIP, Bosch. Which one should I ideally go for? Filters in boodmo Also, why are there some filters without the outer casing? |
Originally Posted by supremeBaleno
(Post 5224442)
Hi Shashi, could you please post the partnumbers & price for the following spares of the Baleno1.6 : - rear Struts - front lower arm - front driveShaft And recommendations (if any) for alternatives that are good ? Thanks !!! |
Originally Posted by sac23
(Post 5217596)
Hi, I was trying to purchase an oil filter for Ignis 2018 with a K12B engine from boodmo. There are filters from a lot of manufactures available there. Namely, Purolator, Mahle, Hella, ZIP, Bosch. Which one should I ideally go for? Filters in boodmo Also, why are there some filters without the outer casing? |
Originally Posted by supremeBaleno
(Post 5224442)
Hi Shashi, could you please post the partnumbers & price for the following spares of the Baleno1.6 : - rear Struts - front lower arm - front driveShaft And recommendations (if any) for alternatives that are good ? Thanks !!! |
Originally Posted by sumeethaldankar
(Post 5230127)
Will I get just the container for the new 2019 Petrol Swift. Currently this is how it looks:Frustrati The part is not available at the service centre where I just dropped the car. Have covered the lower torn bits with duct tape. I hope I don't have to change the motor assembly as well just to get the plastic container bit. |
Originally Posted by pjbiju
(Post 5230549)
Leoshashi need your help. Model Name- Swift (2006 make) Variant- VXi Parts Required- A/C compressor & Evaporator My car's AC is now not working properly and may need to replace the compressor. When I enquired with a MGA spares store, they told me that there is a compressor for Type 1 Swift and the cost is ~Rs. 55k and then there is a compressor for Type 2 which he said costs ~14k. Not sure why there is a huge difference in the prices and if they are compatible with each other. |
Originally Posted by Ponbaarathi
(Post 5238067)
Hi, can anyone provide me the part number for PM 2.5 Cabin AC Filter. Model : Swift 2nd Gen Variant : VXI(O) YOM : 2017 Thanks in advance. |
Originally Posted by amvj
(Post 5246343)
Hi Shashi, I would like to change the transmission oil on my Baleno 1.2L Petrol manual. However, I am not sure regarding the drain plug, bolt, washer I need to buy. I checked the parts catalogue but still confused. Please provide the part number for the items I need buy. Attachment 2266314 Hope I can use this oil for my car gearbox. Attachment 2266315 |
Originally Posted by psyph3r
(Post 5246788)
Hi Shashi, Had gone to get one of the squeaky belts repaired and noticed oil leaking near the oil filter. The mechanic said that the switch needs to be replaced, any idea about the part no. ? 2007 Swift Vxi |
Originally Posted by balenoed_
(Post 5253387)
Hi, Can you please provide some detail on power steering pump for Baleno (old). Part# & price. |
Originally Posted by Leoshashi
(Post 5253402)
Part Number: 49110-64G11 Name: PUMP ASSYPOWER STEERING MRP: ₹32,615 |
All times are GMT +5.5. The time now is 11:58. |