Team-BHP
(
https://www.team-bhp.com/forum/)
Quote:
Originally Posted by low_bass_makker
(Post 432318)
Sam Bhai is the sheet only 1.9812 mm thick.......
|
Yes, I guess it is only 1.9812mm as opposed to 2mm. lol
Quote:
Originally Posted by Rtech
(Post 432320)
Hence my original question: What do they define full car as? Coz 6 sheets of that will not cover much area!
|
First decide which area one has to damp......major one will be front door and the boot area.....I am leaving the rear door as very few car have speaker there......after that we can decide how much of the damping stuff is required....
after that how much damping is require....full sealing or partial or complete covering......like mine and Sam Bhai are full seal of the door but the door panel is left out....
2mm maybe thin to some but you wont have room for much more than that. It is a lot better than using no damping.
Wurth India has 2 products (aleast) so I dont know which one they are refering to here. 6 sheets of 250x550mm will barely damp one door (if that). LBM used 2 sheet of 1m x 0.5m for 1 door. That seems correct.
I could get 6 of these larger sheets for under Rs. 4.5K but they are too stiff so think that American Dynamics might be a better product. 3 sheets of AD costs Rs. 4200 and that is 2 sq. m. 6 sheets of Wurth is about teh same and that is 3 sq. m. so AD is about 50% more than Wurth but much more flexible and I'm told it's sticker too.
Quote:
Originally Posted by navin
(Post 432381)
so AD is about 50% more than Wurth but much more flexible and I'm told it's sticker too.
|
AD is 0.623 sq metres for Rs.1400/-
The wuerth is Rs.2500/- for 0.825 sq mtrs.
what happens to the damping sheets if you get hit on the door??:p
If you get hit on the door, you hear less of the crash inside the car.
Quote:
Originally Posted by vid6639
(Post 432400)
what happens to the damping sheets if you get hit on the door??:p
|
on the serious note...if we knock on the damped door it will sound less hollow....but when we knock on the undamped door it will sound hollow....or it will create music of its kind......that is why damping is done.......
If I get hit on my car door which is damped, will they have to remove the damping material to carry out denting painting work?
Quote:
Originally Posted by navin
(Post 432222)
No the reason for this was we were looking at those who would be in mumbai (we cheapskates want to save on shipping). Rags is in delhi and so that does not help.
Rags why not see if you can muster up some Delhi wallas and maybe Sam can make an order for you guys there too. Just make ysure everyone who orders is committed to paying for it. At Rs. 1400 per sheet it is not exactly cheap but it looks like VFM nonetheless.
|
Navin - I have already asked Sam to order some sheets for me too which I'll pick up from him & carry back on my next trip. That way we can save the excess freight and since Sam is getting bulk delivery from Bangalore he can get a freight discount too!!
Quote:
Originally Posted by Sam Kapasi
(Post 432402)
If you get hit on the door, you hear less of the crash inside the car.
|
rl: rl:
Quote:
Originally Posted by low_bass_makker
(Post 432410)
on the serious note...if we knock on the damped door it will sound less hollow....but when we knock on the undamped door it will sound hollow....or it will create music of its kind......that is why damping is done.......
|
LOL!!! Sam, L_B_M what are you guys drinking/smoking.:p
What if someone dents as in bangs the door say a bike or auto. then when we go for tinkering what happens to the damping sheets? throw or can be reused?
Vid I think it would be a throw case. Since the adhesive will not hold if you remove and refit a sheet.
Quote:
Originally Posted by Sam Kapasi
(Post 432337)
Yes, I guess it is only 1.9812mm as opposed to 2mm. lol
|
Oye Amreekan Dynamite
vyaapari, that is
chori. You'll hear from the Weights and Measures department about this soon. Bhole bhaale sardaron ko loot-ta hai? :)
Quote:
Originally Posted by Sam Kapasi
(Post 432402)
If you get hit on the door, you hear less of the crash inside the car.
|
Stop kidding the poor fellow.
If you get hit on the door, you might have to get a new door, but you can peel off and reuse the same damping.
[quote=navin;432222]No the reason for this was we were looking at those who would be in mumbai (we cheapskates want to save on shipping). Rags is in delhi and so that does not help.
Rags why not see if you can muster up some Delhi wallas and maybe Sam can make an order for you guys there too. Just make ysure everyone who orders is
committed to paying for it. At Rs. 1400 per sheet it is not exactly cheap but it looks like VFM nonetheless.
Navin Sir,
From Delhi..I am interested in getting my NHC damped too.
Ishan - Can you increase your order to include few American Dynamics sheets (3-4 nos.) for me too..to be collected from Mumbai (to save on freight my friend
)
Hey Sam : Can I have the part of the loot
as well.!! to cover damping requirement for the front doors & boot NHC. Please do let me know then I can arrange to have the money sent across or hand it over to the regional treasurer aka party organiser aka car footwear expert...Iraghava..!!
Quote:
Originally Posted by Bass&Trouble
(Post 432443)
If you get hit on the door, you might have to get a new door, but you can peel off and reuse the same damping.
|
U can't resuse the damping....Atleast I wasn't able to reuse my XtremeDead.
| All times are GMT +5.5. The time now is 06:21. | |
