Check out the SPL stuff...

low_bass_makker · 3rd December 2007, 11:50

Congrats on the Kicker amp...How much did you got it for ?

Here is a internal pic of the amp.

Taken from Ampguts.

Kicker ZX2500.1

amit_sound · 3rd December 2007, 12:22

thanks for the naked and sexy pic LBM...

Rather than Ampguts they should call it Amp Porn

amit_sound · 3rd December 2007, 16:06

Got the amp for 699$ + shipping

Wirings: 90$ + shipping

low_bass_makker · 3rd December 2007, 16:08

How much is the shipping? or maybe you can tell us the final cost..

amit_sound · 3rd December 2007, 16:21

Hmm...sorry, amp was shipped free.

Wirings were something like 29$ for shipping.

But note, shipped within the US as my brother got the delivery there. Now he is travelling with the stuff to India, so Customs + VAT duty is still to be paid when the stuff lands.

amit_sound · 4th December 2007, 00:04

LBM, if i am right then you using a Steg k2.04 amp. Its also rated at 2400 x 1 @ 2 ohms and had the same power like the zx2500.1.

Now, my question is, what all electrical upgrades have u made your swift? I assume that for running the zx2500.1 in my car i need to do similar electrical as in your car.

So please shed some light.

Bass&Trouble · 4th December 2007, 13:09

Quote:

Originally Posted by amit_sound

Now he is travelling with the stuff to India, so Customs + VAT duty is still to be paid when the stuff lands.

You dont pay VAT when it is carried in by a passenger. 40% flat rate customs duty at a value that the customs officer in charge deems right.

P.S. I must say your amp looks a million bucks.

low_bass_makker · 4th December 2007, 13:27

Quote:

Originally Posted by amit_sound

LBM, if i am right then you using a Steg k2.04 amp. Its also rated at 2400 x 1 @ 2 ohms and had the same power like the zx2500.1.

Now, my question is, what all electrical upgrades have u made your swift? I assume that for running the zx2500.1 in my car i need to do similar electrical as in your car.

So please shed some light.

Yes correct.

Actually I have not upgraded not a single thing in the electrical part. The stock battery is used. The main thing I observe is that voltage does not go below some certain point. And not to play the setup loud for more than few mins...

low_bass_makker · 4th December 2007, 13:29

Quote:

Originally Posted by Bass&Trouble

You dont pay VAT when it is carried in by a passenger. 40% flat rate customs duty at a value that the customs officer in charge deems right.

Very nice Idea you must do it amit

amit_sound · 4th December 2007, 13:30

Quote:

Originally Posted by Bass&Trouble

You dont pay VAT when it is carried in by a passenger. 40% flat rate customs duty at a value that the customs officer in charge deems right.

Oh did not know about VAT thing

Quote:

Originally Posted by Bass&Trouble

P.S. I must say your amp looks a million bucks.

Thanks B&T!!! but for me it is...

Viase, B&T,I will need your help to get the installation done. Hope you do the needful. I try to take some time out and meet you personally.

Meanwhile, LBM!!! kidhar gayab ho gaya?? Elerticals ka kuch idea do sir??

amit_sound · 4th December 2007, 16:01

Quote:

Originally Posted by low_bass_makker

Yes correct.

And not to play the setup loud for more than few mins...

Ya true, i would be playing it loud like 5 mins daily. Rest to probably the woofers gonna be off.

blueraven316 · 4th December 2007, 22:01

Quote:

Originally Posted by amit_sound

Ya true, i would be playing it loud like 5 mins daily. Rest to probably the woofers gonna be off.

With the right note even 5 seconds are eough to go deaf .

So what subs ?? Shud I spill the beans ?

amit_sound · 5th December 2007, 00:22

blueraven316....naught boy!! naught boy!! This is my feast, so let me serve the beans. :P

Just a little more time to do that.....Well i already have the pics of the babes. wanna see???

moralfibre · 5th December 2007, 00:29

Quote:

Originally Posted by amit_sound

Just a little more time to do that.....Well i already have the pics of the babes. wanna see???

Why not ?

amit_sound · 5th December 2007, 00:33

Spoke to FM Drive, Mr Pankaj in Santacruz. Must admit, sounds like a very decent and a well spoken guy.

Asked him the following things:

1) Damping: He says 15K which covers 4 doors + roof + floor of the car. 15k is including the labour charges. How does it sound? Good?
2) Again 15K for some new performance battery. Though he forgot the brand name, but will let me know later.
3) As i told, i also plan to change to rear co-axials to components. For a budget of 10k he suggested some model from Morel audio.
4) Caps: Not intrested in the cap.
5) BIG 3: Forgot to ask him about that.

Guys, wanna make this a perfect setup. No loops at all

3rd December 2007, 11:50	#16
low_bass_makker Senior - BHPian Join Date: Mar 2006 Location: Faridabad Posts: 6,813 Thanked: 306 Times View My Garage	Congrats on the Kicker amp...How much did you got it for ? Here is a internal pic of the amp. Taken from Ampguts. Kicker ZX2500.1
	() Thanks

3rd December 2007, 12:22	#17
amit_sound BHPian Join Date: Dec 2005 Location: Mumbai Posts: 596 Thanked: 11 Times	thanks for the naked and sexy pic LBM... Rather than Ampguts they should call it Amp Porn
	() Thanks

3rd December 2007, 16:06	#18
amit_sound BHPian Join Date: Dec 2005 Location: Mumbai Posts: 596 Thanked: 11 Times	Got the amp for 699$ + shipping Wirings: 90$ + shipping
	() Thanks

3rd December 2007, 16:08	#19
low_bass_makker Senior - BHPian Join Date: Mar 2006 Location: Faridabad Posts: 6,813 Thanked: 306 Times View My Garage	How much is the shipping? or maybe you can tell us the final cost..
	() Thanks

3rd December 2007, 16:21	#20
amit_sound BHPian Join Date: Dec 2005 Location: Mumbai Posts: 596 Thanked: 11 Times	Hmm...sorry, amp was shipped free. Wirings were something like 29$ for shipping. But note, shipped within the US as my brother got the delivery there. Now he is travelling with the stuff to India, so Customs + VAT duty is still to be paid when the stuff lands.
	() Thanks

4th December 2007, 00:04	#21
amit_sound BHPian Join Date: Dec 2005 Location: Mumbai Posts: 596 Thanked: 11 Times	LBM, if i am right then you using a Steg k2.04 amp. Its also rated at 2400 x 1 @ 2 ohms and had the same power like the zx2500.1. Now, my question is, what all electrical upgrades have u made your swift? I assume that for running the zx2500.1 in my car i need to do similar electrical as in your car. So please shed some light.
	() Thanks

5th December 2007, 00:22	#28
amit_sound BHPian Join Date: Dec 2005 Location: Mumbai Posts: 596 Thanked: 11 Times	blueraven316....naught boy!! naught boy!! This is my feast, so let me serve the beans. :P Just a little more time to do that.....Well i already have the pics of the babes. wanna see???
	() Thanks

5th December 2007, 00:33	#30
amit_sound BHPian Join Date: Dec 2005 Location: Mumbai Posts: 596 Thanked: 11 Times	Spoke to FM Drive, Mr Pankaj in Santacruz. Must admit, sounds like a very decent and a well spoken guy. Asked him the following things: 1) Damping: He says 15K which covers 4 doors + roof + floor of the car. 15k is including the labour charges. How does it sound? Good? 2) Again 15K for some new performance battery. Though he forgot the brand name, but will let me know later. 3) As i told, i also plan to change to rear co-axials to components. For a budget of 10k he suggested some model from Morel audio. 4) Caps: Not intrested in the cap. 5) BIG 3: Forgot to ask him about that. Guys, wanna make this a perfect setup. No loops at all
	() Thanks