Best Mono Block below 15k

mohitd · 15th May 2009, 20:04

So is it going to be the 7001 finally.

chiragh_bir · 15th May 2009, 20:40

yes guys !

finally after long survey..phew !!

Sam Kapasi · 15th May 2009, 23:06

Quote:

Originally Posted by abhibh

Its not kenwood. Kenny comes with 2 Fuses. It has 3

Seems like Blau or JBL with 3 fuses!

Abhibh, that was a very sharp observation. Even I did not remember that. Well done.

abhibh · 15th May 2009, 23:28

hehe thank you.

I got an !dea. Lets switch. I would be my honor to be Brand Director of JBL

Quote:

Originally Posted by Sam Kapasi

Abhibh, that was a very sharp observation. Even I did not remember that. Well done.

Attachment 136770

panky12345 · 16th May 2009, 11:10

Quote:

Originally Posted by abhibh

hehe thank you.

I got an !dea. Lets switch. I would be my honor to be Brand Director of JBL

That means Sam baba is getting old!

Nothing else..

chiragh_bir · 17th May 2009, 13:13

amp is coming after 15 -20 days !!

so in the mean time i will sort out the wiring and all

and best part is 7001 is smaller than 1004 dimesnsion wise so much easier for me to install underseat to hide it away :P

rider60 · 19th May 2009, 09:23

Quote:

Originally Posted by chiragh_bir

amp is coming after 15 -20 days !!

so in the mean time i will sort out the wiring and all

and best part is 7001 is smaller than 1004 dimesnsion wise so much easier for me to install underseat to hide it away :P

do not stuff this amp under the front seats you will regret the decision its bound to get really hot and wont have enough air to breath free.

chiragh_bir · 19th May 2009, 10:15

Quote:

Originally Posted by rider60

do not stuff this amp under the front seats you will regret the decision its bound to get really hot and wont have enough air to breath free.

IMHO opinion the amps get more heated up in back than under seats , because there is no circulation of air in trunk

I generally keep my AC on Face + Feet mode to allow air to circulate , and my driving is not too much hardly 15- 20 mins and then a hault.

I will try to install a small motherboard cooling fan underseat as well as well , little tricky but can be done !!

DerAlte · 19th May 2009, 10:26

Quote:

Originally Posted by chiragh_bir

... I will try to install a small motherboard cooling fan underseat as well as well, little tricky but can be done !!

Don't bother. Just make sure there is nothing in the front or back below the seat that obstructs the natural convection air flow.

chiragh_bir · 19th May 2009, 10:41

there is enough space, even my 1004 which was bigger in size length wise never had issues!

karankapoor · 19th May 2009, 11:01

the best place for mounting the amp in a hatch is the back of the back seat, the amps are more safe there or the boot floor.

i had a bad experience with placing the amp under the front seat, a friend of mine once stepped on the rca lead and the connector of at the amp end was broken.

chiragh_bir · 19th May 2009, 12:08

Quote:

Originally Posted by karankapoor

the best place for mounting the amp in a hatch is the back of the back seat, the amps are more safe there or the boot floor.

i had a bad experience with placing the amp under the front seat, a friend of mine once stepped on the rca lead and the connector of at the amp end was broken.

RCA is taken out very nicely diret under the seat , no one can stamp on it...

Took me 2 hrs to figure it out to make it safe

razor4077 · 19th May 2009, 12:53

Picked up this beast of an amp recently. Got a very nice deal on it. A friend will be bringing it down from the US next month.

Best Mono Block below 15k-h108r611af_mt11.jpg

The Infinity Reference 611a
456 watts RMS x 1 at 4 ohms, 657 watts RMS x 1 at 2 ohms

This is more of a future-proofing exercise. I don't have a sub currently that can handle this amp's power. Something for the future - I am pretty certain that I won't need anything more powerful than this.

chiragh_bir · 19th May 2009, 13:12

Quote:

Originally Posted by razor4077

Picked up this beast of an amp recently. Got a very nice deal on it. A friend will be bringing it down from the US next month.

Attachment 137511

The Infinity Reference 611a
456 watts RMS x 1 at 4 ohms, 657 watts RMS x 1 at 2 ohms

This is more of a future-proofing exercise. I don't have a sub currently that can handle this amp's power. Something for the future - I am pretty certain that I won't need anything more powerful than this.

When is your friend coming?

And price for same!!

Sam Kapasi · 19th May 2009, 13:19

Quote:

Originally Posted by razor4077

Picked up this beast of an amp recently. Got a very nice deal on it. A friend will be bringing it down from the US next month.

This is more of a future-proofing exercise. I don't have a sub currently that can handle this amp's power. Something for the future - I am pretty certain that I won't need anything more powerful than this.

Hey Razor, congratulations on the amplifier. Just a small warning, this is a discontinued/older model - just you should know that, there's nothing wrong with the amplifier.

15th May 2009, 20:04	#61
mohitd BHPian Join Date: May 2008 Location: Calcutta Posts: 140 Thanked: 2 Times	So is it going to be the 7001 finally.
	() Thanks

15th May 2009, 20:40	#62
chiragh_bir Senior - BHPian Join Date: Dec 2004 Location: In front of you :P Posts: 1,123 Thanked: 74 Times View My Garage	yes guys ! finally after long survey..phew !!
	() Thanks

17th May 2009, 13:13	#66
chiragh_bir Senior - BHPian Join Date: Dec 2004 Location: In front of you :P Posts: 1,123 Thanked: 74 Times View My Garage	amp is coming after 15 -20 days !! so in the mean time i will sort out the wiring and all and best part is 7001 is smaller than 1004 dimesnsion wise so much easier for me to install underseat to hide it away :P
	() Thanks

19th May 2009, 10:41	#70
chiragh_bir Senior - BHPian Join Date: Dec 2004 Location: In front of you :P Posts: 1,123 Thanked: 74 Times View My Garage	there is enough space, even my 1004 which was bigger in size length wise never had issues!
	() Thanks

19th May 2009, 11:01	#71
karankapoor Senior - BHPian Join Date: Apr 2008 Location: in the car!!! Posts: 1,675 Thanked: 6 Times	the best place for mounting the amp in a hatch is the back of the back seat, the amps are more safe there or the boot floor. i had a bad experience with placing the amp under the front seat, a friend of mine once stepped on the rca lead and the connector of at the amp end was broken.
	() Thanks

19th May 2009, 12:53	#73
razor4077 Senior - BHPian Join Date: Sep 2006 Location: Mumbai Posts: 1,882 Thanked: 298 Times View My Garage	Picked up this beast of an amp recently. Got a very nice deal on it. A friend will be bringing it down from the US next month. The Infinity Reference 611a 456 watts RMS x 1 at 4 ohms, 657 watts RMS x 1 at 2 ohms This is more of a future-proofing exercise. I don't have a sub currently that can handle this amp's power. Something for the future - I am pretty certain that I won't need anything more powerful than this.
	() Thanks