Team-BHP (https://www.team-bhp.com/forum/)

-   Gadgets, Computers & Software (https://www.team-bhp.com/forum/gadgets-computers-software/)

-   -   On Wi-Fi & Routers (https://www.team-bhp.com/forum/gadgets-computers-software/64258-wi-fi-routers-167.html)

That should work. Get a good quality extender (Like TP Link RE650) . If you are getting 100 mbps on first floor, this should give you close to 100 mbps in second floor as well.

For best results, pulling a LAN cable to first floor is the only option. But 100 mbps might be good enough for most cases.

So the TpLink 300N got delivered yesterday. I set it up and placed in the open area on the first floor and voila all the bedrooms on the first floor are getting full range. Operated my TV with FireStick on the first floor without any buffering.

Extender TP Link RE650 is really High Class :thumbs up

I have a 2 floor with 2800 sq ft area approx. I am looking to buy a mesh network and being a complete noob in these aspects, need help in deciding Deco X20 2 pack 4000 sq ft vs Deco M5 2 pack 3800 sq ft.

Also can i add another unit of same Deco later if I find 2 pack not sufficient?

KK

Get the Deco M5 3 pack instead. My house has slightly bigger dimensions than yours but the 3 pack covers both floors very well. I get around around 80-150 Mbps everywhere on the house which is good enough for anything really. If you want greater than 200 Mbps, get the M9 which has a dedicated 5Ghz backhaul. I’m assuming you won’t run ethernet backhaul here. If you do, then just get the M5s.

And yes, you can mix and match new Decos into the system when you buy them later.

Thanks for your revert. Deco M5 3 pack it is. But not aware of what is ethernet backhaul, I just want to use it along with my ACT connection, which has a Tenda router.

Anything specific I have to be aware of? downsides of M5?

KK

Edit - M9 Plus 2 pack is coming at 13499 on Croma, after bank discount it will be 13k, does it make sense to go for 2 pack M9 Plus instead of 3 pack M5 (costs 14.5k).

Been using Deco M5 (3 pack) for over a year now. Has worked seamlessly and without any issues whatsoever. Easy to install and control via the TP Link app. Can't say much about M9 Plus but I guess it makes more sense to take a 3 pack than a 2 pack. Do take other reviews into consideration. :)

I suggest getting the M5 3 pack. I’m not sure if M9 plus will actually fully cover your house at the speeds you probably want.

Regarding ethernet backhaul, you can operate a mesh network in two ways. All nodes connected wirelessly (this is what most people do) or run ethernet cables from node 1 to a switch and then to other two nodes. This provides the highest performance but it’s not the most convenient as you probably don’t have ethernet lines in your home . A ethernet backhauled mesh network is very scalable (think IT offices). While for wireless mesh, part of the wifi bandwidth is lost to carry the data for node to node.

For your use case, plus a ethernet cable from your Tenda router to the node 1 and place the other two nodes where you like. It’s simple as that. Remember to turn off WiFi from the Tenda router after your mesh is setup l.

I hope some of our members can help me out:

i am building a new house in a small farm house scheme and would like to ensure that wifi is available all over. The wiring has yet to be done so there is scope to install such equipment as may be desirable to ensure good connectivity. The house is spralling and large, spread over two floors.

1. while i shall ensure that CAT6 cables are installed in all bedrooms and study for ensuring efficient connectivity.
2. What wifi system should i use for other areas and for phone, i pad connectivity?
3. Would a "nest" system be ideal or are there any other better systems?

Would appreciate if someone could guide me since the wiring has not yet been done and there is still scope to hardwire, if required.

I use an Aimesh system with two routers from Asus. I had also recommended Asus to many of my friends and family and they are satisfied.

I use cat6 ethernet cable as the backhaul.

Here is an interesting video about Aimesh:
https://youtu.be/kPVpsXb6ejU

Thank you. Seems quite interesting. Shall check it out. How does it rate with the Google mesh system?

This should help fix most reachability issues. First things first, I would suggest to make sure to keep the modem/router different WI AP system. That helps.

Any Wifi Mesh (5 or 6) should be good given you have strong ethernet running in the house. You can use them for backhauling as well. Do look at mesh systems support ethernet backhaul.

Lost you there.:confused:

The Modem/Router and the Wifi access point/network hardware usually are one device (plus the satellite devices). My point was to keep the modem separate (one which the ISP provides). And connect it to the Wifi Mesh System which you procure separately. So that way you keep the two separate.

I have done the same thing. I have switched off WiFi on my jiofiber modem. It connects to only one device through the ethernet cable which is my primary aimesh asus router. The asus aimesh system manages all my other connected devices.

Now jio cannot know what are all the devices I have connected, etc. which is a good thing.

Now I am not an expert but with my limited knowledge, jiofiber does not allow bridge mode and I cannot turn off its DHCP server, and so my aimesh system is double NAT'ed (or triple?) which has its own problems?

My Sony PS4 connection status says "NAT Type = Type 2", and everything works fine so I'm okay with my current setup