Performance Mods for Octavia RS

buzzin_hornets · 2nd April 2006, 02:51

Quote:

Originally Posted by BUSA

Saw at Four Season their Petes RS. He (is also a member of this site but inactive) claims that its around 300bhp.

Here are some pics : -

I met the owner.. he said 235-250 bhp

~cheers
-Ash

BUSA · 2nd April 2006, 17:19

It has Konis

These are 235/35/ZR 19 OZ wheels

These are the Sparcos on them.

TDi Wheels. Spotted this once before in Vashi have a pic but its mobile pic.

F1 Tyres anyone?

one edited deleted as it shows the licence number.

adya33 · 2nd April 2006, 21:39

What do F1 tyres has to do with Modded RS ?

Oh and also http://www.team-bhp.com/forum/announ...-team-bhp.html

BUSA · 2nd April 2006, 23:17

Adya33 what do you wish to prove. Dont spoil the thread PM me and we can take the fight over there. Pics can be posted if they are resized to that size. You will understand the pain if you post loads of pics by resizing, removing the number plates, adding copyright and then posting so

dont spoil the party..

Quote:

What do F1 tyres has to do with Modded RS ?

EDIT : The tyres of the RS are from the same place where the F1 tyres are lying.

Turbo_charged · 2nd April 2006, 23:31

PHASE 1

1) Generic Remap – 38500
2) Diverter Valve - 10800
3) Green Cotton Panel filter - 5650
(Direct Replacement)

PHASE II

1. Phase 2 remap – 46500
Forge Diverter Valve –
2. 10800
3. Carbonio Intake - 19800

4. Milltek Catback Exhaust- 44000
5. OR Milltek full Exhaust - 1,05,000

6. Forge Turbo Intake pipe - 12900

7. Top and Bottom Braces VAG - 13800
8. OR Neuspeed Braces - 27750

9. Zimmermann Rotors 288mm front – 18000
10. OR Zimmermann Rotors uprated to 312mm - 30000
11. OR Tarox Rotors front set - 33500
12. OR Tarox Rotors uprated to 312mm - 46000
13. Tarox Rotors rear 232mm 22000

14. Pagid fast road pads front - 8800
15. Pagid fast road pads rear - 6800
16. OR Tarox Strada brake pads front - 12850
17. Tarox Strada brake pads rear - 9800
18. OR Tarox Rallye front pads - 14200

19. Forge Front Mount Intercooler - 98000

20. H&R Coil overs - 111000

You will need to do 1, 2, 3, 4 or 5, 6 and either 7 or 8 for the 225 bhp Phase 2.

The Phase 2 above 225bhp will require the item No – 19.

For better brakes you will need to choose from 9 to 18.
And for better traction, stability and road holding you’ll need to go in for 20 or Koni Sport, Bilstein etc...

An email sent by petes to me about rs phase 2 upgrades

karthik247 · 2nd April 2006, 23:47

Turbo Charged...thats one bloody long list! Won't a ECU remap give u a good increase in power?

west · 3rd April 2006, 09:10

You are not supposed to revel the email , Modds please erase the email please!!!!!!

abhinav.gupta88 · 24th November 2009, 05:19

Hey Guys.

No Wait. Dont jump to conclusions. It hasn't started yet.

But this just might be the start to mods to my Laal Pari ( Skoda Octavia vRs)

I need suggestions.

Just want to keep the mods limited to stage 1 as of now. ( Budget constraints plus step by step upgrades)

I'm Currently in UK. Need to know what all do i need for stage 1 upgrade and What all of that is better bought from UK. I have time till Sunday to order the stuff as i'm keeping atleast 2 weeks as the total delivery time to be on the safe side.

Also, help me out with something which can look good on the externals.
A Few Photoshops ( CF Diffusers, CF mirror covers and maybe something else ; no body kits please)

Thanks a lot in advance.

Abhinav

abhayshanu · 24th November 2009, 05:26

What is the budget?
How about FFE, CAI, maybe even a remap will do wonders to the vRS.

abhinav.gupta88 · 24th November 2009, 05:32

I'm not too keen on changing the Exhaust due to the design. however if there's a good design or something which is really good, i would definitely look into it.

What all CAI brands to look for. Also I'm not too much intersted into custom made FFE. A Full exhaust system is what would be better.

Also what BOV can i go for? any links?

karthik247 · 24th November 2009, 07:23

Quote:

Originally Posted by abhinav.gupta88

Also what BOV can i go for? any links?

That would be a really good start. Just gotta love that blow off sound. And not all BOV's sound alike..

v1p3r · 24th November 2009, 08:11

Forge is your best bet. You cannot install some BOVs due to the venting system. As far as airfilters go, look for either a K&N stock replacement/drop in, or look for a cold air kit. This is the 1.8T engine, and is very popular in the UK. It also comes on the Golf, Seat Ibiza, and some other cars.

smokin · 24th November 2009, 09:38

so the mods have started !!!

as for the CAI go for the carbonio air intake system ,i have seen a vrs fitted with it response is good and event he looks too .

as for the BOV go with the FORGE only ,if you need the particular model let me know..

Happy modding

m4ugr8 · 24th November 2009, 11:17

I personally feel you should add nothing to the exterior of the Car, it looks HOT Stock only. All mods should be under the hood only.

CAI as rightly mentioned by Smokin go for the Carbonio Intake system. If I were you my mods would be Intake+Cat Back+Remap.

Waiting to see what all mods you decide upon. MOD it well.

babhishek · 24th November 2009, 13:21

@ abhinav : check out briskoda and dealer section...
i call them up - they are a helpful lot.
on another note - be ready to travel and pick up from store.. which is the best option so locate the store/dealer closest to you geographically.

2nd April 2006, 17:19	#17
BUSA Senior - BHPian Join Date: Aug 2005 Location: Bombay Posts: 5,130 Thanked: 20 Times View My Garage	It has Konis These are 235/35/ZR 19 OZ wheels These are the Sparcos on them. TDi Wheels. Spotted this once before in Vashi have a pic but its mobile pic. F1 Tyres anyone? one edited deleted as it shows the licence number. Last edited by navin : 3rd April 2006 at 10:03.
	() Thanks

2nd April 2006, 21:39	#18
adya33 Senior - BHPian Join Date: Apr 2005 Location: Pune Posts: 1,839 Thanked: 183 Times	What do F1 tyres has to do with Modded RS ? Oh and also http://www.team-bhp.com/forum/announ...-team-bhp.html
	() Thanks

2nd April 2006, 23:31	#20
Turbo_charged Newbie Join Date: Jun 2004 Location: MUMBAI Posts: 17 Thanked: 0 Times	PHASE 1 1) Generic Remap – 38500 2) Diverter Valve - 10800 3) Green Cotton Panel filter - 5650 (Direct Replacement) PHASE II 1. Phase 2 remap – 46500 Forge Diverter Valve – 2. 10800 3. Carbonio Intake - 19800 4. Milltek Catback Exhaust- 44000 5. OR Milltek full Exhaust - 1,05,000 6. Forge Turbo Intake pipe - 12900 7. Top and Bottom Braces VAG - 13800 8. OR Neuspeed Braces - 27750 9. Zimmermann Rotors 288mm front – 18000 10. OR Zimmermann Rotors uprated to 312mm - 30000 11. OR Tarox Rotors front set - 33500 12. OR Tarox Rotors uprated to 312mm - 46000 13. Tarox Rotors rear 232mm 22000 14. Pagid fast road pads front - 8800 15. Pagid fast road pads rear - 6800 16. OR Tarox Strada brake pads front - 12850 17. Tarox Strada brake pads rear - 9800 18. OR Tarox Rallye front pads - 14200 19. Forge Front Mount Intercooler - 98000 20. H&R Coil overs - 111000 You will need to do 1, 2, 3, 4 or 5, 6 and either 7 or 8 for the 225 bhp Phase 2. The Phase 2 above 225bhp will require the item No – 19. For better brakes you will need to choose from 9 to 18. And for better traction, stability and road holding you’ll need to go in for 20 or Koni Sport, Bilstein etc... An email sent by petes to me about rs phase 2 upgrades
	() Thanks

2nd April 2006, 23:47	#21
karthik247 Senior - BHPian Join Date: Feb 2005 Location: BLR, HYD Posts: 2,710 Thanked: 30 Times	Turbo Charged...thats one bloody long list! Won't a ECU remap give u a good increase in power?
	() Thanks

3rd April 2006, 09:10	#22
west BHPian Join Date: Feb 2005 Location: India Posts: 273 Thanked: 49 Times	You are not supposed to revel the email , Modds please erase the email please!!!!!!
	() Thanks

24th November 2009, 05:19	#23
abhinav.gupta88 Senior - BHPian Join Date: Sep 2007 Location: Delhi , India Posts: 4,092 Thanked: 325 Times View My Garage	Mods for my Octavia RS Hey Guys. No Wait. Dont jump to conclusions. It hasn't started yet. But this just might be the start to mods to my Laal Pari ( Skoda Octavia vRs) I need suggestions. Just want to keep the mods limited to stage 1 as of now. ( Budget constraints plus step by step upgrades) I'm Currently in UK. Need to know what all do i need for stage 1 upgrade and What all of that is better bought from UK. I have time till Sunday to order the stuff as i'm keeping atleast 2 weeks as the total delivery time to be on the safe side. Also, help me out with something which can look good on the externals. A Few Photoshops ( CF Diffusers, CF mirror covers and maybe something else ; no body kits please) Thanks a lot in advance. Abhinav
	() Thanks

24th November 2009, 05:26	#24
abhayshanu BHPian Join Date: Mar 2009 Location: Mumbai Posts: 708 Thanked: 324 Times View My Garage	What is the budget? How about FFE, CAI, maybe even a remap will do wonders to the vRS.
	() Thanks

24th November 2009, 05:32	#25
abhinav.gupta88 Senior - BHPian Join Date: Sep 2007 Location: Delhi , India Posts: 4,092 Thanked: 325 Times View My Garage	I'm not too keen on changing the Exhaust due to the design. however if there's a good design or something which is really good, i would definitely look into it. What all CAI brands to look for. Also I'm not too much intersted into custom made FFE. A Full exhaust system is what would be better. Also what BOV can i go for? any links?
	() Thanks

24th November 2009, 08:11	#27
v1p3r Senior - BHPian Join Date: Feb 2005 Location: BLR / DXB / LON Posts: 5,334 Thanked: 6,896 Times View My Garage	Forge is your best bet. You cannot install some BOVs due to the venting system. As far as airfilters go, look for either a K&N stock replacement/drop in, or look for a cold air kit. This is the 1.8T engine, and is very popular in the UK. It also comes on the Golf, Seat Ibiza, and some other cars.
	() Thanks

24th November 2009, 09:38	#28
smokin BHPian Join Date: May 2008 Location: delhi/gurgaon Posts: 281 Thanked: 15 Times View My Garage	so the mods have started !!! as for the CAI go for the carbonio air intake system ,i have seen a vrs fitted with it response is good and event he looks too . as for the BOV go with the FORGE only ,if you need the particular model let me know.. Happy modding
	() Thanks

24th November 2009, 11:17	#29
m4ugr8 Senior - BHPian Join Date: Jul 2007 Location: New Delhi Posts: 1,291 Thanked: 129 Times View My Garage	I personally feel you should add nothing to the exterior of the Car, it looks HOT Stock only. All mods should be under the hood only. CAI as rightly mentioned by Smokin go for the Carbonio Intake system. If I were you my mods would be Intake+Cat Back+Remap. Waiting to see what all mods you decide upon. MOD it well.
	() Thanks

24th November 2009, 13:21	#30
babhishek BHPian Join Date: Sep 2006 Location: KOLKATA Posts: 328 Thanked: 35 Times View My Garage	@ abhinav : check out briskoda and dealer section... i call them up - they are a helpful lot. on another note - be ready to travel and pick up from store.. which is the best option so locate the store/dealer closest to you geographically. Last edited by babhishek : 24th November 2009 at 13:22.
	() Thanks