What is this called?

dsinz · 19th September 2006, 10:05

Guys what is the circled part called? Do we get imitation parts of the same so that we can fix it to any car without tinkering the bonet?

If available any idea of cost and where to get in Bangalore..
Thanks!

Stratos · 19th September 2006, 10:15

That is an air scoop which has the air intake for the engine. The engine needs air which is sucked from the air intake!

dsinz · 19th September 2006, 10:29

Quote:

Originally Posted by Stratos

That is an air scoop which has the air intake for the engine. The engine needs air which is sucked from the air intake!

Any idea whether imitation part of air scoop is available for styling... We get fancy antenna's, GPS spoiler fins etc. wondering if air scoop also available in a similar way...

elf · 19th September 2006, 10:40

Scoops on the bonnet are generally used by vehicle designers to indicate a higher spec "special" or limited engine.

This idea (as far as I know), was first used in the American muscle cars of the late 60's & 70's to suck more air into the air filter mounted just below it. The air flow (along with the correct plumbing) used to cause a "Ram Air" effect at high speeds, thus mildly supercharging the car.

The modded Ford Mustang above probably uses it to feed more air using a Venturi effect into the air filter to gain better breathing at greater speeds.

A look alike is sold today in India, (by accessory-wallahs at Milan & Opera House in Bombay), as a tack-on plastic bit that you can stick anywhere - your hood / roof / doors / even your fuel filler cap if you please!

Here's a coupla pics for you...

WhiteKnight · 19th September 2006, 10:47

Forget about imitation scoop. I recently saw a scoop pic pasted on the bonnet of a santro

Btw, the scoop is also used for intercoolers in some cars, right?

Jay · 19th September 2006, 10:52

Fake air scoops can be seen on the new Scorpio's

dsinz · 19th September 2006, 10:55

Quote:

Originally Posted by WhiteKnight

Forget about imitation scoop. I recently saw a scoop pic pasted on the bonnet of a santro

Btw, the scoop is also used for intercoolers in some cars, right?

cool, stickers also seem to be an alternative option...
Any idea of Bangalore accessories walah's who deal with air scoops... and any idea of autographics website url?

Quote:

Originally Posted by Jay

Fake air scoops can be seen on the new Scorpio's

oh yeah... totally forgot about it. Require something like that... Any contact info of accessories dealer in bangalore for the same?

whatcanthisbe · 19th September 2006, 11:42

like others have mentioned this is an air scoop used for puiing in more "Relatively Colder" air thereby giving you a lil more HP..

More info on cold air intakes
here
Here and
here

IMP people going vor conical intakes and placing them in the engine bay with out a heat sheild are not gaining any HP but mayinfact be loosing some HM the traditional intakes are housed inside a sheilding which to some extent sheilds from engine heat and if you remove the sheild and just put in a conical intake IMO you care making a mistake

speedzak · 19th September 2006, 15:40

Quote:

Originally Posted by dsinz

cool, stickers also seem to be an alternative option...
Any idea of Bangalore accessories walah's who deal with air scoops... and any idea of autographics website url?

Are you sure you wanna do something FAKE on your lovely ride??

If the answer is yes, then just go to JC road and walk into any shop and ask for stickers. You'll find plenty of airscoop designs. And if you want to fit in a fake like Scorpio, then ask for bonnet radiator!!!! Funny name??? Yes, it is in the local lingo!!!

aZa · 19th September 2006, 16:04

Autographix makes auto stickers and there is a "Hood scoop" 3D design, looks cool and is best to use if u have to conceal any scratches on the hood.

Sam Kapasi · 19th September 2006, 16:25

ummm dsinz, what car do you drive anyways?

heelntoe · 19th September 2006, 16:45

@whiteknight yes some cars that have tmic like the subaru impreza wrx sti use hood scoops for the intercoolers.

dsinz · 19th September 2006, 19:03

Quote:

Originally Posted by Sam Kapasi

ummm dsinz, what car do you drive anyways?

Well I drive an alto. Bought it recently.. though a kutti car, I want it to look sporty. During purchase, I upgraded to slightly wider tubeless and alloys, chrome grill, Spoiler fin, fog lamps, body color bumper etc.

I am a newbie n cant create the gallery, so once I am an BHPian I will upload some pics.

Quote:

Originally Posted by aZa

Autographix makes auto stickers and there is a "Hood scoop" 3D design, looks cool and is best to use if u have to conceal any scratches on the hood.

hey aZa

Do you know the URL of the Autographix. Cannot get the right website of theirs.Thanks!

elf · 19th September 2006, 20:40

Fitting a hood scoop onto a vehicle for most of the climate in India seems like a bad idea - we have dusty conditions, rain & slush on our metalled roads, forget the actual rural / off-road driving. It'll create more problems than any joy it might bring you.

A cold air intake with a K&N / alternative should suit your purpose. You can contact a tuner / modder or a TBHPian in your area who can guide you on this.

Stickering / fake hood scoops just look cheap, at least IMHO.

My honest advice to you: Don't do it.

PS: Can someone throw light on the way Ram Air systems using hood scoops channel rain water, or do the owners simply not drive around when it's wet?

Methinks that most of the Ram Air systems of the 60's & 70's were V8s running cranky carbs. How did they manage the water being gulped down at a presumably astonishing rate?

speedzak · 19th September 2006, 21:46

Quote:

Originally Posted by car crazy kid

if i was you i wouldnt put on stickers for vents or airscoops. i think the car looks cheap. but thats just my opinion.

My opinion too!
Alto with such a small body and so many stickers, spoiler, airscoop, extras will make the car look wierd, cheap and wacky. And before you know, it will be posted somewhere else other than your gallery like here. So take caution!

BTW, DSINZ! can you post a pic of your car in this thread for an idea? Or you can post here. I think newbies can post pics using imageshack on their posts. Ain't it??

19th September 2006, 10:05	#1
dsinz BHPian Join Date: Aug 2006 Location: Bangalore Posts: 114 Thanked: 20 Times	Guys what is the circled part called? Do we get imitation parts of the same so that we can fix it to any car without tinkering the bonet? If available any idea of cost and where to get in Bangalore.. Thanks!
	() Thanks

19th September 2006, 10:15	#2
Stratos Senior - BHPian Join Date: Mar 2004 Location: Belgium Posts: 2,613 Thanked: 1,602 Times View My Garage	That is an air scoop which has the air intake for the engine. The engine needs air which is sucked from the air intake!
	() Thanks

19th September 2006, 10:40	#4
elf BANNED Join Date: Jan 2005 Location: Bombay Posts: 1,035 Thanked: 16 Times View My Garage	Scoops on the bonnet are generally used by vehicle designers to indicate a higher spec "special" or limited engine. This idea (as far as I know), was first used in the American muscle cars of the late 60's & 70's to suck more air into the air filter mounted just below it. The air flow (along with the correct plumbing) used to cause a "Ram Air" effect at high speeds, thus mildly supercharging the car. The modded Ford Mustang above probably uses it to feed more air using a Venturi effect into the air filter to gain better breathing at greater speeds. A look alike is sold today in India, (by accessory-wallahs at Milan & Opera House in Bombay), as a tack-on plastic bit that you can stick anywhere - your hood / roof / doors / even your fuel filler cap if you please! Here's a coupla pics for you... Last edited by elf : 19th September 2006 at 10:52.
	() Thanks

19th September 2006, 10:47	#5
WhiteKnight Senior - BHPian Join Date: Mar 2006 Location: Bangalore Posts: 1,006 Thanked: 702 Times View My Garage	Forget about imitation scoop. I recently saw a scoop pic pasted on the bonnet of a santro Btw, the scoop is also used for intercoolers in some cars, right?
	() Thanks

19th September 2006, 10:52	#6
Jay BHPian Join Date: Mar 2006 Location: Bangalore Posts: 819 Thanked: 8 Times	Fake air scoops can be seen on the new Scorpio's
	() Thanks

19th September 2006, 11:42	#8
whatcanthisbe BHPian Join Date: Mar 2006 Location: http://www.wandering-online.com Posts: 499 Thanked: 6 Times	like others have mentioned this is an air scoop used for puiing in more "Relatively Colder" air thereby giving you a lil more HP.. More info on cold air intakes here Here and here IMP people going vor conical intakes and placing them in the engine bay with out a heat sheild are not gaining any HP but mayinfact be loosing some HM the traditional intakes are housed inside a sheilding which to some extent sheilds from engine heat and if you remove the sheild and just put in a conical intake IMO you care making a mistake
	() Thanks

19th September 2006, 16:04	#10
aZa Senior - BHPian Join Date: Mar 2006 Location: Noida / Delhi Posts: 1,595 Thanked: 25 Times View My Garage	Autographix makes auto stickers and there is a "Hood scoop" 3D design, looks cool and is best to use if u have to conceal any scratches on the hood.
	() Thanks

19th September 2006, 16:25	#11
Sam Kapasi Distinguished - BHPian Join Date: Jul 2005 Location: Mumbai (but wat Posts: 6,939 Thanked: 2,479 Times View My Garage	ummm dsinz, what car do you drive anyways?
	() Thanks

19th September 2006, 16:45	#12
heelntoe BHPian Join Date: Apr 2006 Location: navi mumbai Posts: 238 Thanked: Once	@whiteknight yes some cars that have tmic like the subaru impreza wrx sti use hood scoops for the intercoolers.
	() Thanks

19th September 2006, 20:40	#14
elf BANNED Join Date: Jan 2005 Location: Bombay Posts: 1,035 Thanked: 16 Times View My Garage	Fitting a hood scoop onto a vehicle for most of the climate in India seems like a bad idea - we have dusty conditions, rain & slush on our metalled roads, forget the actual rural / off-road driving. It'll create more problems than any joy it might bring you. A cold air intake with a K&N / alternative should suit your purpose. You can contact a tuner / modder or a TBHPian in your area who can guide you on this. Stickering / fake hood scoops just look cheap, at least IMHO. My honest advice to you: Don't do it. PS: Can someone throw light on the way Ram Air systems using hood scoops channel rain water, or do the owners simply not drive around when it's wet? Methinks that most of the Ram Air systems of the 60's & 70's were V8s running cranky carbs. How did they manage the water being gulped down at a presumably astonishing rate? Last edited by elf : 19th September 2006 at 20:44.
	() Thanks

Thread Tools	Search this Thread
	Search this Thread: Advanced Search