Lancer getting Pimped - Project "Diablo"

redeye · 30th October 2007, 19:59

thanks bro, managed to change the order cancelled Nx lenso , getting the new lenso Rs5 white, i should be getting it by 4th i hope..

BUSA · 30th October 2007, 22:09

Quote:

Originally Posted by redeye

That Lancer looks hot, go for it, though the graphics dont appeal much to me.

blueye_666 · 8th November 2007, 09:32

i have seen these alloys in sprocket 16inch i think it would amazing on a red lancer... i would suggest you go for it

Bikerboy5432 · 11th November 2007, 10:26

hi, redeye whats going with the project heard you got new Yokohama rubbers cheap.. waiting for your result best of luck buddy

ram_hyundai · 11th November 2007, 10:51

very nice work buddy

lancersfx · 11th November 2007, 18:12

Good that you changed your order. Cuz the Rs 5 white look hot and especially with a lancer

... I am planning to upgrade the rims and tyres on my ikon. But will probably not be untill the next 6 months. Any ideas if the same lensos can be fit on the ikon 1.8d?

blueraven316 · 11th November 2007, 18:49

Quote:

Originally Posted by lancersfx

Good that you changed your order. Cuz the Rs 5 white look hot and especially with a lancer

... I am planning to upgrade the rims and tyres on my ikon. But will probably not be untill the next 6 months. Any ideas if the same lensos can be fit on the ikon 1.8d?

No they will not fit as they are 100 PCD on Lancer, but there are 15" Lenso rims available for Ikons (108 PCD)

redeye · 14th November 2007, 07:35

hi guys ,

Bought a 5 set of Rubbers YOkohama brand new for 15k

and i'm getting a FFE and Green cotton filter Install from Raj which is 11.5k for the ffe and 9k for the filter .

The end can is SS

pls tell if the pricing is right?
i'm going to leave the car at raj workshop on Sat.

And about the car, Which is still in progress. here is latest pic

the bumper still at work!

and

this is the bonnet which is rejected..because the design on the bonnet is way in the front . it had to be close to the middle..

because of this the work is extended.. i wish get my car back soon

sorry guys for image quality it was taken from cell cam.

rjstyles69 · 14th November 2007, 12:30

You have been watching too much of " Pimp My Ride " haven't you

?

Good luck and call me when you are there, will drop by to test drive the car

. Have sent you a PM.

ram_hyundai · 14th November 2007, 16:31

hey buddy,

that horn like projection on the bumper looks odd if you can get rid of it -think of it.regards,

ram

razor4077 · 14th November 2007, 22:02

Good progress dude. Things are beginning to take shape! Waiting for more.

theMAG · 14th November 2007, 22:48

redeye,

Couldnt help noticing from the 1st pic in post #120 that the right fog light fabrication on the bumper is too angled from center for any illumination to be effective.

Btw - when is the ETD ? The last I remember something with this type of a gestation period was an obscure alien from MIB.

redeye · 15th November 2007, 07:38

Quote:

Originally Posted by rjstyles69

You have been watching too much of " Pimp My Ride " haven't you

?

Good luck and call me when you are there, will drop by to test drive the car

. Have sent you a PM.

Yup

i'm a big fan of pimp my ride....See you soon then..

Cheers,
ram

JayD · 15th November 2007, 08:40

Redeye, pls change the position of the foglamps. With the current design, it gonna light up footpaths and medians! Make it look straight atleast. When u got such bigg lamps, might as well use them right??

redeye · 15th November 2007, 22:57

Guys if you see at the pic carefully there is a guy holding it.. it was not moulded yet... i will be going there tomorrow to get back the car for ffe from raj. will post pics of the work done.. hope they have no messed it.

Quote:

Originally Posted by theMAG

redeye,

Couldnt help noticing from the 1st pic in post #120 that the right fog light fabrication on the bumper is too angled from center for any illumination to be effective.

Btw - when is the ETD ? The last I remember something with this type of a gestation period was an obscure alien from MIB.

Quote:

Originally Posted by JayD

Redeye, pls change the position of the foglamps. With the current design, it gonna light up footpaths and medians! Make it look straight atleast. When u got such bigg lamps, might as well use them right??

30th October 2007, 19:59	#106
redeye BHPian Join Date: Jul 2006 Location: bangalore Posts: 275 Thanked: 4 Times View My Garage	thanks bro, managed to change the order cancelled Nx lenso , getting the new lenso Rs5 white, i should be getting it by 4th i hope..
	() Thanks

8th November 2007, 09:32	#108
blueye_666 Newbie Join Date: Nov 2007 Location: Bangalore Posts: 5 Thanked: 0 Times	i have seen these alloys in sprocket 16inch i think it would amazing on a red lancer... i would suggest you go for it
	() Thanks

11th November 2007, 10:26	#109
Bikerboy5432 Newbie Join Date: Nov 2007 Location: Bangalore Posts: 5 Thanked: 0 Times	hi, redeye whats going with the project heard you got new Yokohama rubbers cheap.. waiting for your result best of luck buddy
	() Thanks

11th November 2007, 10:51	#110
ram_hyundai Senior - BHPian Join Date: Jun 2006 Location: Calicut ,trisur Posts: 2,020 Thanked: 53 Times View My Garage	very nice work buddy
	() Thanks

11th November 2007, 18:12	#111
lancersfx BHPian Join Date: Jan 2006 Location: Bangalore Posts: 225 Thanked: 44 Times View My Garage	Good choice of alloys... Good that you changed your order. Cuz the Rs 5 white look hot and especially with a lancer ... I am planning to upgrade the rims and tyres on my ikon. But will probably not be untill the next 6 months. Any ideas if the same lensos can be fit on the ikon 1.8d?
	() Thanks

14th November 2007, 07:35	#113
redeye BHPian Join Date: Jul 2006 Location: bangalore Posts: 275 Thanked: 4 Times View My Garage	hi guys , Bought a 5 set of Rubbers YOkohama brand new for 15k and i'm getting a FFE and Green cotton filter Install from Raj which is 11.5k for the ffe and 9k for the filter . The end can is SS pls tell if the pricing is right? i'm going to leave the car at raj workshop on Sat. And about the car, Which is still in progress. here is latest pic the bumper still at work! and this is the bonnet which is rejected..because the design on the bonnet is way in the front . it had to be close to the middle.. because of this the work is extended.. i wish get my car back soon sorry guys for image quality it was taken from cell cam.
	() Thanks

14th November 2007, 12:30	#114
rjstyles69 Senior - BHPian Join Date: Sep 2006 Location: Bengalooru.. Posts: 4,343 Thanked: 842 Times View My Garage	You have been watching too much of " Pimp My Ride " haven't you ? Good luck and call me when you are there, will drop by to test drive the car . Have sent you a PM.
	() Thanks

14th November 2007, 16:31	#115
ram_hyundai Senior - BHPian Join Date: Jun 2006 Location: Calicut ,trisur Posts: 2,020 Thanked: 53 Times View My Garage	hey buddy, that horn like projection on the bumper looks odd if you can get rid of it -think of it.regards, ram
	() Thanks

14th November 2007, 22:02	#116
razor4077 Senior - BHPian Join Date: Sep 2006 Location: Mumbai Posts: 1,882 Thanked: 298 Times View My Garage	Good progress dude. Things are beginning to take shape! Waiting for more.
	() Thanks

14th November 2007, 22:48	#117
theMAG Distinguished - BHPian Join Date: May 2006 Location: Avon, CT Posts: 7,217 Thanked: 1,807 Times View My Garage	redeye, Couldnt help noticing from the 1st pic in post #120 that the right fog light fabrication on the bumper is too angled from center for any illumination to be effective. Btw - when is the ETD ? The last I remember something with this type of a gestation period was an obscure alien from MIB.
	() Thanks

15th November 2007, 08:40	#119
JayD Senior - BHPian Join Date: Jun 2007 Location: Cochin! At last Posts: 3,236 Thanked: 2,568 Times View My Garage	Redeye, pls change the position of the foglamps. With the current design, it gonna light up footpaths and medians! Make it look straight atleast. When u got such bigg lamps, might as well use them right??
	() Thanks