Team-BHP - Tachometers

Team-BHP (https://www.team-bhp.com/forum/)

- Modifications & Accessories (https://www.team-bhp.com/forum/modifications-accessories/)

- - Tachometers (https://www.team-bhp.com/forum/modifications-accessories/6757-tachometers-28.html)

Quote:

Originally Posted by UniqueMods (Post 1691285)

nice tacho. nice to see it all worked for you. install is good and clean.

where is the oil flow sensor attached ? to which part.

UM

Well I got the Tach and Voltage Sensor connected at EVO and the Oil pressure at my regular MASS. From what the mech told me, i think it is connected inplace of the original sensor. So now the Red Indicator on the center console doesn't glow. I have to look for reading and make sure it doesn't drop or rise too much. Hope this helps. :)

Quote:

Originally Posted by gpa (Post 1692037)

Zenster,

From where did you pick up this piece? It looks really nice! Great to know that you've configued almost all the gauges to work! clap:

Do let me know from where you picked it up in BLR, so i can get one too. Have been looking for a good tach for my Alto for months now.

Thanks in advance.

Regards,
gpa

Thanks GPA glad you liked it. As the prev post says, I got it from the classifieds in Team-bhp sold to me my Hyderabad based member. It didn't work on his 3 cyl M800 so I got it and works like a charm.

All works and the temperature sensor isn't complicated just that it will take time to drill the exact hole etc for the sensor etc. Will get it done in my next service.

Well about getting a tach for you Alto, Kingofmyworld can give you more details on what he has installed and then you can look for that model. Or you can just call or visit Satya's place in Cambridge layout, Indiranagar and i'm sure he can work something out. PM me if you need his contact details.

I have fitted wagonR vxi speedo to my alto and it has a tach and light on remainder built in no mods reqd direct fit.:D

hey all,
I am new at this posting. Can anyone tell me if I can Fit a tacho meter on my Vista TDi? Pls do let me know!

Finally after 6 months of wait, im getting my tachometer this weekend. Its SunPro CP7901! :D

Amazon.com: Sunpro CP7901 Super Tachometer II - Black Dial: Automotive

I want to try DIY install. I have Carb Zen. How difficult it is?

Any BKMs which I can follow for a proper install. Any Zen veterans here who can guide me with wiring points specific to Zen.

Thanks in advance.

I am planning on getting a voltmeter fixed into my Sierra, Auto gauge. this should be straight forward Right,or should i be looking for something different as its a diesel engine

I completed the installation of Sunpro tachometer. Its 3CP7901 -3/8"

I ordered from US costed me Rs. 1800/- :D

My mechanic took 300 rs for installation. He was quiet clean with installation. Worked the first time I cranked the engine.

Placement is good, does not hinder vision but is at quick spot to see.

Tach is good, smooth pointer operation. No fancy colors considering its cost. However size is big enough for clear readings.

I once pumped for a sec to 7000 RPM:Shockked: Didn't have guts to do it again for video!

Below are couple of pics a short video.

YouTube - Tach.wmv

Please let me know your feedback!

Hi that's a really neat tacho.Doesn't seem to have a shift light but thats fine.What's the red mark at the 3000 RPM position?

Thanks!

The red mark can be set at any RPM, usually to mark danger RPM or time-to-shift RPM.

Guys,

I've been trying to get an Autogauge diesel tacho fitted to my LDi for months now, with no success. The guy I bought it from couldn't do it, Four Seasons (Mumbai) couldn't do it, and MASS (Vitesse Mumbai) couldn't do it.

Anyone know someone who can do this, or has had this done?

Help would be much appreciated. please:

Quote:

Originally Posted by anky (Post 1697525)

I have fitted wagonR vxi speedo to my alto and it has a tach and light on remainder built in no mods reqd direct fit.:D

Where did you get this done and what was the cost? Please post pics, I want to fix it for my Alto as well!

devrajman
The tacho looks really nice. Is that a carb Zen? where did you get this fixed? its time to get one of these for my trusty esteem.

Quote:

Originally Posted by Captain Slow (Post 1786901)

devrajman
The tacho looks really nice. Is that a carb Zen? where did you get this fixed? its time to get one of these for my trusty esteem.

Thanks. Yes, its a Carb Zen. Any MASS/accessory guy can do it. Just be around inspecting the installation.:D

Hi I purchased the speedo of wagon r from market at opera house mumbai and fitted it myself . very easy no mods reqd just remove dash and clip on the new speedo. total 8 screws ... 4 fo dash and 4 of speedo.ps i have service manual so it was easy. :D

hi guys, i am trying to install an aftermarket tach all by my self, i think 13BB unit runs on dual coil so i need to connect the tach to the ecu signal wire. If anyone has installed a tach in their MPFI Esteem i would appreciate any pics or guidance. thanks

Hi friends, anybody tried fitting a non alternator tachometer for diesel car.