Team-BHP - A superb Car cleaning, polishing & detailing guide

I sufferred a "kiss" with another vehicle. There is a dent, professional treatment will be necessary, but in the meantime it is the paint from the other vehicle that makes the thing look uglier than it is.

The other vehicle was one of those mini trucks, so the paint is that yellow/green stuff.

First, I'd like "less ugly." Second, I want to know how much my own paint layer is damaged underneath, which determines how urgent (risk of rust) the repair job is. How do you guys recommend cleaning off the "foreign" paint?

Or is it just not worth bothering and I should go straight to the professionals?

Quote:

Originally Posted by Thad E Ginathom (Post 4127515)

Try a rag soaked in rubbing alcohol.

Quote:

Originally Posted by Thad E Ginathom (Post 4127515)

Start off with rubbing compound to get the paint off then either restore the finish now with a fine polish and wax or after you get the denting sorted

Not sure what happened to all the car cleaning fellows here. :)

Lot of products on sale on Amazon.in today. Have a look

Some microfibers from ChemicalGuys seem to be well priced.

Quote:

Originally Posted by S_U_N (Post 4135138)

Not sure what happened to all the car cleaning fellows here. :)

Lot of products on sale on Amazon.in today. Have a look

Some microfibers from ChemicalGuys seem to be well priced.

Thanks for the heads up.

Did you find anything worth buying. I felt there were no must buy offers, unless I have missed something.

KK

Even autofresh is running a good discount on Chemical guys (CG) stuff. If any one of you likes CG stuff then do visit them.

http://www.autofresh.in/republic-day...-care-products

I bought a set of ultra plush microfiber towels which shows a discount of 45% :D

Disclaimer: I do not have any commercial interest in either sharing autofresh link or promoting CG products.

Folks, a few micro scratches on the black trim and body of my car. While I can use a polish for the regular paint, what should I do regarding the trim- which is either plastic or some sort of a vinyl wrap? I doubt I can use polish for that. Should I simply apply a little bit of tire polish to make the black trim appear darker and see if that makes the micro scratches less visible?

Guys,

My supply of Ultima waterless wash is running out and i was planning to try out ProKlear RAW Xtreme CX

Can somebody tell me if Proklear is up to the mark and how it compares to Ultima

Thanks

Quote:

Originally Posted by nova9 (Post 4137889)

Guys,

My supply of Ultima waterless wash is running out and i was planning to try out ProKlear RAW Xtreme CX

Can somebody tell me if Proklear is up to the mark and how it compares to Ultima

Thanks

Stick with Ultima. It's way better!

Quote:

Originally Posted by harsh79 (Post 4137975)

Stick with Ultima. It's way better!

Interesting! I have never used Ultima, so can't compare. But I have been using Proklear since about 2 years now, and I am very happy. Now that you say Ultima is way better, I would like to give it a shot...

However, can you please elaborate in what sense is Ultima better than ProKlear?

Quote:

Originally Posted by shifu (Post 4137984)

I've been through 3 bottles of PK before switching to UWW. It's the resulting shine and slickness of UWW that I've become a fan of. Using a Jopasu duster for 3-4 days post UWW is as effortless as it can get.

PK has a tendency to leave spots (in my experience) if left sprayed-on longer, no such issues with UWW.

Another thing I like about UWW is that buffing with a second microfibre is not really needed as the minor residual wipe marks dry really fast and again don't leave any lines or spots.

Works very well as a QD too.

Quote:

Originally Posted by nova9 (Post 4137889)

Guys,

My supply of Ultima waterless wash is running out and i was planning to try out ProKlear RAW Xtreme CX

Can somebody tell me if Proklear is up to the mark and how it compares to Ultima

Thanks

I've been using ONR and then switched to Pro-klear to test it out. Proklear always need a second time buffing to clear the water marks. With ONR or Ultima you can skip that if you are in a hurry.
Another thing I noticed is the dilution ratio of PK is very critical. If you add a little too much PK, it leaves a hell lot of streaks and will be a pain to clean it off. I switched back to ONR after 4-5 washes with PK.

I'm almost out of ONR - my last stash was from Sanjay at BBImpex. But looks like its out of stock there as well. Checked Amazon but its not delivering to Mumbai/ Thane.

Where do I get it from?

Quote:

Originally Posted by aghosht (Post 4140013)

I'm almost out of ONR - my last stash was from Sanjay at BBImpex. But looks like its out of stock there as well. Checked Amazon but its not delivering to Mumbai/ Thane.

Where do I get it from?

I bought the last bottle Sanjay had of ultima 4 days ago, and at a price thats cheaper than what its at now at amazon.com :)

Greenz car car still has stock of ONR

https://www.greenzcarcare.com/produc...ant=3797036485

Quote:

Originally Posted by nova9 (Post 4140032)

Yes saw that thanks. Only issue is I'll have to settle for a small bottle - I was looking to buy an entire can!