[Sutripta]

Originally Posted by Sabareesh

if the chassis is cut and welded properly, it can withstand the abuse when taken off-road.

Start of an interesting new can of worms "The strength of welds, and welded components"

Sutripta

[offroad_maniac]

How much a new chassis costs? I read in a thread that Bolero Storm's chassis costs around 40K.

So... say If someone owning a MM5540/550 can simply order a Army NGCS Chassis (Will they be available on order?) which will be a bolt on mount pt wise? Many people here will benefit from it if it sells under 30-40K?

[jeepster]

Originally Posted by offroad_maniac

How much a new chassis costs? I read in a thread that Bolero Storm's chassis costs around 40K.
So... say If someone owning a MM5540/550 can simply order a Army NGCS Chassis (Will they be available on order?) which will be a bolt on mount pt wise? Many people here will benefit from it if it sells under 30-40K?

if 550 ngcs chassis is not available then simply order bolero chassis (one with front leaf spring set up or 4x4 one).

OLD braking news
jeyobeb bought (almost new) 2005 bolero chassis for 8k from scrap market.
*thread
*post

Q :is it possible to buy just the bent side frame rails from mahindra vendor? (see pic)

[SPIKE ARRESTOR]

I doubt if this ^^ will be possible, you may contact Alf Engineering or KLT, Palghar regarding the same.

Spike

[SPIKE ARRESTOR]

Found this excellent article on the net, thought of sharing it here. Good read.

Early Classic - Technical Articles

Spike

[headers]

Originally Posted by SPIKE ARRESTOR

Found this excellent article on the net, thought of sharing it here. Good read.

Early Classic - Technical Articles

Spike

This was posted long back by another member - whose name I forget

Good reading though!