Team-BHP
(
https://www.team-bhp.com/forum/)
Quote:
Originally Posted by alstonlobo
(Post 4076944)
yes, this is working fine, although had changed the gun attachment a year back since it was not used for a long time, probably the apparatus inside got jammed.
|
Thank you, Alston!
Quote:
Originally Posted by diyguy
(Post 4076962)
I am planning to get the head replaced in my karcher as it was not pumping at high speed. It has been unused for more than a year. Very unhappy with it actually.
|
The head of the k2.x series costs roughly around 4.5k. And almost in every case, after replacing the head, the oil leaks out and ruines the unit.
I changed 2 small plastic cogs in the pump that should cost no more than 20 bucks. Ended up paying 1.8k for them!!!:Frustrati
I'm thinking of picking up a unit from Makita or bosch.
^^
I have been using basic Makita for about a year now. Use it monthly twice. Till now there is no problem. Water is hard water or soft depending on what's available. Its very noisy. I put some old rag on top of it to silence it a bit (I know it will stop heat dissipation etc).
Quote:
Originally Posted by james
(Post 4077162)
Thank you, Alston!
I'm thinking of picking up a unit from Makita or bosch.
|
I'd recommend the Makita, for me getting spares is piece of cake as the dealer and service centre is walking distance from my house so A.S.S is taken care of without any issues.
Which are the long lasting/ reliable pressure washers in the 5000-15000 price range?
I see many issues with Karcher 2.x series.
Quite astonished that the products do not last more than a few dozen uses.
Quote:
Originally Posted by S_U_N
(Post 4079239)
Which are the long lasting/ reliable pressure washers in the 5000-15000 price range?
I see many issues with Karcher 2.x series.
Quite astonished that the products do not last more than a few dozen uses.
|
I had a bosch aquatech 100 which sharted oil leakage in 3 years. I bought a karcher k3.550 2 years back. Thought it was a stable version but proven wrong last week it started leaking water and the repair cost was 3k. The usage is very less mostly biweekly. So my experience stay away from any model which has plastic heads /couplers. As per the karcher service personal k7 models are all aluminum/Cooper ones.
Quote:
Originally Posted by arun_sharon
(Post 4091550)
karcher k3.550 2 years back. ...tepair cost was 3k. K7 models are all aluminum/Cooper ones.
|
+1
Sadly I had to learn this same fact from experience myself too. Which city and where is this service center? I should get mine fixed as I haven't used it in almost 15 months
Quote:
Originally Posted by five46
(Post 4034188)
That's that. Any hopes that it can wash down the muck will also water down. The bristles are very soft. Good to wash down the dust. Mud splashes around the skirt is difficult to remove with this.
|
My ResqTech unit has now gone out of warranty. Here is what I feel about it:
I have found the weakest link is the O-ring inside the lid/screw top. Mine went kaput in the first six months. I visited the factory where the unit is assembled/stored and got a replacement pump with a spare O ring. Within a few months, the O ring gave up again.
It would hardly be a Rs. 20 part, but it lets pressure out, rendering the pump useless. It's not even worth the effort of communicating with the manufacturer and geting a couple of O rings dispatched. I scratched my head for an easier solution.
Finally I tried the silocone sealant. I had bought a tube for sealing some cracks in our bathroom tiles, and I tried applying that in the recess where the O ring normally sits. I left it to dry for 24 hours and then tried the pump.
Coming back to the pump itself, when you pump it to a decent pressure, the force is strong enough to dislodge grime from between tiles. If the O ring leaks pressure, get rid of it, and fill that space with a good quality silicone sealant and you have something longer lasting than the original O ring. Once the pressure holds, you need to fill it completely with water, and then work the handle about 25 to 30 times to build up a good amount of pressure. It should help with the muck.
The other part is if you want to clean up good, take around half a bucket of water mixed with a good car shampoo. Get a good sponge to apply it to the car's body. Spray a fine mist from the pump, then thoroughly apply the shampoo, and then use the brush or nozzle with a good pressure to clean up the shampoo. Use a good micro fibre cloth to wipe it and you will see a new car!
The tube sealant also proved ineffective, with pieces of it coming out and finally I discarded it completely. Bought a new GP sealant in Gurgaon, a big tube, with a gun - and applied it last morning to the inside of the screw top. Let it cure for around 24 hours.
Today I fitted the screw top to the pump, worked the handle a few times, and the pressure held on for more than a minute as I sprayed a steady jet. No let up of pressure.
Hopefully this new GP silicone sealant stays put longer than the earlier one. With this type of performance, it would beat any battery powered pump hands down.
Quote:
Originally Posted by arun_sharon
(Post 4091550)
I had a bosch aquatech 100 which sharted oil leakage in 3 years. I bought a karcher k3.550 2 years back. Thought it was a stable version but proven wrong last week it started leaking water and the repair cost was 3k. The usage is very less mostly biweekly. So my experience stay away from any model which has plastic heads /couplers. As per the karcher service personal k7 models are all aluminum/Cooper ones.
|
Quote:
Originally Posted by diyguy
(Post 4091624)
+1
Sadly I had to learn this same fact from experience myself too. Which city and where is this service center? I should get mine fixed as I haven't used it in almost 15 months
|
Thanks for writing. I see that the K7 is upwards of Rs. 40000 which is prohibitory pricing for my personal use.
Isn't there anything in the 10-15K range which is durable?
Quote:
Originally Posted by S_U_N
(Post 4109760)
Thanks for writing. I see that the K7 is upwards of Rs. 40000 which is prohibitory pricing for my personal use.
Isn't there anything in the 10-15K range which is durable?
|
Hitachi AW130 seems to be good - IT has lot of good reviews in Australia.
Quote:
Originally Posted by scopriobharath
(Post 4109828)
Hitachi AW130 seems to be good - IT has lot of good reviews in Australia.
|
Thanks!
This seems to have just 6 months warranty. Isn't that too less for such products?
Quote:
Originally Posted by S_U_N
(Post 4110197)
Thanks!
This seems to have just 6 months warranty. Isn't that too less for such products?
|
In fact I too am looking out to buy one and none of them seem to offer more than six months warranty. Hitachi supposedly being Japanese offers better quality (hopefully) as they offer in Australia.
Quote:
Originally Posted by honeybee
(Post 4091637)
My ResqTech unit has now gone out of warranty. Here is what I feel about it:
I have found the weakest link is the O-ring inside the lid/screw top. Mine went kaput in the first six months. I visited the factory where the unit is assembled/stored and got a replacement pump with a spare O ring. Within a few months, the O ring gave up again.
It would hardly be a Rs. 20 part, but it lets pressure out, rendering the pump useless. It's not even worth the effort of communicating with the manufacturer and geting a couple of O rings dispatched. I scratched my head for an easier solution.
Finally I tried the silocone sealant. I had bought a tube for sealing some cracks in our bathroom tiles, and I tried applying that in the recess where the O ring normally sits. I left it to dry for 24 hours and then tried the pump.
Coming back to the pump itself, when you pump it to a decent pressure, the force is strong enough to dislodge grime from between tiles. If the O ring leaks pressure, get rid of it, and fill that space with a good quality silicone sealant and you have something longer lasting than the original O ring. Once the pressure holds, you need to fill it completely with water, and then work the handle about 25 to 30 times to build up a good amount of pressure. It should help with the muck.
The other part is if you want to clean up good, take around half a bucket of water mixed with a good car shampoo. Get a good sponge to apply it to the car's body. Spray a fine mist from the pump, then thoroughly apply the shampoo, and then use the brush or nozzle with a good pressure to clean up the shampoo. Use a good micro fibre cloth to wipe it and you will see a new car!
|
Hi Honeybee,
I see that you are struggling with the Oring, try wrapping the Oring with teflon tape around the circumference starting from the ID to OD along the whole of the circumference. I have seen even cracked O rings worked like this. A tight fit initially bit does the job. I agree its a jugad, but then why not if it works.
Hope the above helps.
Hi i was on a look out for a preassure washer narrowed down to Bosch aqt 33-11 along with a derergent nozzle, any reviews on this or will it be like eureka forbes vaccum cleaner u buy it and never use it. Price for both together is Rs 8199+412
Quote:
Originally Posted by S_U_N
(Post 4079239)
Which are the long lasting/ reliable pressure washers in the 5000-15000 price range?
|
I had upto 10k budget and went ahead with Bosch AQT 35-12.
Quote:
Originally Posted by S_U_N
(Post 4032372)
Bosch AQT 35-12 is available on Amazon lightening deal for Rs. 8399
|
I got mine for 6750 during a recent sale at flipkart :)
Quote:
Originally Posted by quakerme
(Post 4114726)
Hi i was on a look out for a preassure washer narrowed down to Bosch aqt 33-11 along with a derergent nozzle, any reviews on this or will it be like eureka forbes vaccum cleaner u buy it and never use it. Price for both together is Rs 8199+412
|
The 33-11 was going for 5400 recently at flipkart sale. I got 35-12. You can check my review in the link mentioned below:
http://www.team-bhp.com/forum/modifi...ni-review.html
| All times are GMT +5.5. The time now is 16:59. | |
