Team-BHP - Auto Lighting thread : Post all queries about automobile lighting here

- - Auto Lighting thread : Post all queries about automobile lighting here (https://www.team-bhp.com/forum/modifications-accessories/93908-auto-lighting-thread-post-all-queries-about-automobile-lighting-here-798.html)

Quote:

Originally Posted by Gemini83BLR (Post 4948569)

Jeep compass stock HID's are not great, any recommendation on upgrade without voiding the warranty?

Even in slight drizzle in the night visibility is very poor.

Preferred location: Bangalore

I swapped the stock halogens in my Compass LTD for these.
https://www.amazon.in/gp/product/B07...?ie=UTF8&psc=1

Happy with the output in the limited use I've put them through till now. You can also get them in the warmer 4500k temperate if you want.

Quote:

Originally Posted by adityagurjar (Post 4948964)

Thanks, planning to replace the stock HID's with good quality pair of 4300K HID bulbs.

Quote:

Originally Posted by Sanket299 (Post 4949635)

Hi I am looking to change the halogen h27 foglamp of creta to led I also plan to use a yellow film to counter fog. please suggest a good brand.

Please avoid using a film as it blocks actual lumens on the road. Go with projectors and 3000k or 4300k hid's.

Quote:

Originally Posted by Behemoth (Post 4947909)

The only worthwhile upgrade which can be done for cars with projector halogen headlights is to put in 35w HID retrofit kits with 4300k cct. This gives an actual 2.5 increase in light levels and is actually effective. However this should be done only in projector lens headlights and NOT in reflector headlights.

Very useful insight. I'm looking to improve the lighting of my Verna SXO 2015 that comes with Halogen Projectors. Can you share a specific model reference for these 35w HID retrofit kits and a ball park cost.

Quote:

Originally Posted by autotranny (Post 4955345)

Check this link - here

You'll need to drill a hole in the headlight dust cap for the HID wires to pass through, rest all is plug and play.

Quote:

Originally Posted by autotranny (Post 4955345)

Depending on your bulb type (check the halogen bulb type in your manual)
The corresponding HID kit will be D+original bulb type. For example if your original Halogen bulb is HB3, the HID kit required will be DHB3.
There are two CCTs available in Osram in India - 6000K (which is cool white) and 4200k (which is neutral white). I would recommend you get the 4200k one.
Am sharing a link for one of the Osram HID kits on Amazon (for reference) but make sure to get the correct HID kit as per your OE bulb.

https://www.amazon.in/dp/B071G58L1M/..._GXj2FbB1HJNMJ

For my Thar v1, I have following in mind: Phillips relay to handle 100/90 bulbs + Osram/Philips 100/90 Rallye bulbs. Suggestions welcome.
Also looked into Osram nightbreaker lazer (55w) bulbs which are surprisingly quite costly, however reviews suggest 100/90 give out better output. Ruled out LEDs because I am unsure how would be the spread from Thar’s stock reflectors.

I have Hella 500FF comets on order. Combined with above setup, this should solve lighting issues IMO. Thoughts?

Quote:

Originally Posted by amol4184 (Post 4961765)

Quoting my own post. Luckily, a shop here had relay and bulbs, both by Philips, in stock. They threw in installation for free (wasn't too difficult),will check the actual spread and depth tonight! The mech said you'll definitely see difference compared to any other upgrade. While I doubt this will be as good as HID kit, expecting noticeable improvement. Let's see.

Hellas are still coming. Need to decide a place for them to fit.

Is it even possible to change the LEDs on an OEM LED setup from the factory at all? I'm sincerely not too satisfied with the throw on my new Vento's LED headlights, and night driving feels basically out of the question, especially in rainy conditions.

Any inputs welcome and appreciated!

Quote:

Originally Posted by Sen (Post 4962539)

Very difficult and may not be feasible at all. What I recommend is that you get third party Vento headlight units with Xenon projectors and swap out the whole headlights. Check on mxsmotorsport (search on google) - they have some options.

Guys need help to understand if the below mentioned bulbs would fit a 2015 Honda City iDtec. Checked out Bodomo and it states the OEM Bulb is Stanley H11 12 V, 55W.

Philips H11 WBT10 12362 Crystal Vision Headlight Bulb (12V, 55W, 2 Bulbs)

Also any recommendations for LED reading lights in the cabin ?

The stock headlight of my VW Vento(2012 model) is not at all bright. What are my options to increase the brightness (other than changing to Philips or Osram bulbs). Can I convert it to HID/LED Unit. If it is possible then please suggest the best place to do it in Bangalore.

Quote:

Originally Posted by a4anurag (Post 4955396)

Check this link - here

You'll need to drill a hole in the headlight dust cap for the HID wires to pass through, rest all is plug and play.

Thanks. Wouldn't this void the warranty? The accessories dealer is claiming it wont, but I am skeptical as this involves connecting a ballast which I assume would mean a non plug and play operation. I have a SX 2019 model with halogen projectors and I have an extended warranty of 100K KM / 5Y and my car has done only 28K KM.