Team-BHP - Test drive : Hyundai GETZ CRDi diesel
Team-BHP

Team-BHP (https://www.team-bhp.com/forum/)
-   Test-Drives & Initial Ownership Reports (https://www.team-bhp.com/forum/test-drives-initial-ownership-reports/)
-   -   Test drive : Hyundai GETZ CRDi diesel (https://www.team-bhp.com/forum/test-drives-initial-ownership-reports/33218-test-drive-hyundai-getz-crdi-diesel-10.html)

Quote:

Originally Posted by akshay1234 (Post 773216)
pp2 isnt available in 60 profile. you will get pilot preceda 1.

Yes. correct. pp2 is there in 185/60 and 205/60. pp1 for 195/60

Elito

BFG is available in 195/60-14..

Quote:

Originally Posted by kpzen (Post 773278)
BFG is available in 195/60-14..

Prajesh,

What is BFG?

Can we fit 205/60-14 on Getz without any mods?
What is the cost of 205/60-14 Michelin pp2's?

@undead
You can also consider 195/60-14 Michelin Energy XM1.

Quote:

Originally Posted by djay99 (Post 773489)
@undead
You can also consider 195/60-14 Michelin Energy XM1.

But the michelin website says 6.0 J rim is recommended for 195/60 (5.5J minimum though).I am getting a feeling that whether that will reduce the performance of it since Getz OE rims is 5.5 J . If i go for 185/60 , 5.5J is recommeded and the Speedo error is also lesser than 195/60 .

Quote:

Originally Posted by undead (Post 771340)
this is the Hyundai Getz Prime Ad i found in the YouTube. Never seen it on TV though..

YouTube - Hyundai Getz Ad

It's been in T.V many times.

Guys any News about GETZ D with ABS ?

Quote:

Originally Posted by undead (Post 773522)
But the michelin website says 6.0 J rim is recommended for 195/60 (5.5J minimum though).I am getting a feeling that whether that will reduce the performance of it since Getz OE rims is 5.5 J . If i go for 185/60 , 5.5J is recommeded and the Speedo error is also lesser than 195/60 .

dude believe me. if you get a petes box and have 185 tyres. press the throttle more than half and youll find yourself wheelspinning.

Quote:

Originally Posted by undead (Post 773522)
But the michelin website says 6.0 J rim is recommended for 195/60 (5.5J minimum though).I am getting a feeling that whether that will reduce the performance of it since Getz OE rims is 5.5 J . If i go for 185/60 , 5.5J is recommeded and the Speedo error is also lesser than 195/60 .

You can fit 195/60-14 on 5.5J rims without any issues.
I think Anju has same tyres on 5.5J aura alloys.

You can ignore speedo error since you are getting much better handling compared to OE tyres.

Quote:

Originally Posted by akshay1234 (Post 773591)
dude believe me. if you get a petes box and have 185 tyres. press the throttle more than half and youll find yourself wheelspinning.

Akshay is absolutely right.
If you are installing petes box for performance then get 205 tyres.
If getting petes for driveability then 195 is ok.
185 is not just enough when peted.

Also remember that the PS will feel heavy with 195 or 205 tyres as i felt its heavy even with stock 175 tyres.

Quote:

Originally Posted by djay99 (Post 773619)
Akshay is absolutely right.
If you are installing petes box for performance then get 205 tyres.
If getting petes for driveability then 195 is ok.
185 is not just enough when peted.

Also remember that the PS will feel heavy with 195 or 205 tyres as i felt its heavy even with stock 175 tyres.

195/60 then .. Pete's for drivability only , as my roads are having lots of lorry traffic and in my ikon flair i had to kepp on shifting gears to overtake them . When i took the TD vehicle , PS was good . May be because i sometimes drive Omni , Tata Ace etc , i feel the getz PS easy.

Quote:

Originally Posted by undead (Post 773631)
195/60 then .. Pete's for drivability only , as my roads are having lots of lorry traffic and in my ikon flair i had to kepp on shifting gears to overtake them . When i took the TD vehicle , PS was good . May be because i sometimes drive Omni , Tata Ace etc , i feel the getz PS easy.

You own a Tata Ace? Is there a TD report on this, 0-100 timings ?? Any plans to Pete this ??? :uncontrol

Quote:

Originally Posted by djay99 (Post 773619)
Also remember that the PS will feel heavy with 195 or 205 tyres as i felt its heavy even with stock 175 tyres.

agree:Power steering is slightly heavy with 175. With 195 or 205, it would be pretty bad.

195/60-14 Tyre options

1. Michelin PP1 - 4k per tyre
2. BF Goodrich Gsport -3.5k per tyre
3. Michelin Energy XM1
4. Yokohama ES100
5. Bstone Turanza ER60 - Very good for bad roads.
6. Bstone Potenza GIIIs

Getz Crdi definitely needs at least 195 rubber. With stock rubber it was wheelspining in 3rd gear:Shockked:...Wonder what petes will do..

Just now spoke to Trident hyundai guy and he said waiting period for Getz Crdi is 6 weeks.
He insisted me to wait for i20 (modified Getz according to him) which will be launched in next 3 to 4 months.
Guys do you think hyundai will launch i20 in 3-4 months?

Quote:

Originally Posted by sanjayatarizona (Post 773735)
You own a Tata Ace? Is there a TD report on this, 0-100 timings ?? Any plans to Pete this ??? :uncontrol

He He .. Ya , we using it as a parcel service carrier here , 0-100 ? i could touch 100 kmph mark in the Ace , May be after i Pete it , i may achieve it , but the end i think only the Steering Wheel will be in my hand , the tyres , engines , body etc will be left somewhere behind .. :uncontrol

Quote:

Originally Posted by djay99 (Post 773790)
Just now spoke to Trident hyundai guy and he said waiting period for Getz Crdi is 6 weeks.
He insisted me to wait for i20 (modified Getz according to him) which will be launched in next 3 to 4 months.
Guys do you think hyundai will launch i20 in 3-4 months?

Interesting . One of my friend who is working in Hyundai told me that , the next car is i30 and its coming in 2009 not the i20 .. May be the sales guy read our forum and telling the same back to you..:D


All times are GMT +5.5. The time now is 17:12.