ICE the Beast

jkdas · 3rd July 2008, 22:22

I get an SMS from Zak. I get ideas. I get wicked ideas too. I am gonna ICE my Safari 2.2L. It should be one of a kind at TBHP.It will be a budget install. It will be done by someone who loves ICE. It will be ICEd under Zak's/Hydra's wicked eyes.

All I can reveal is that I will HAVE to use my Alpine HU, 9870, my Pioneer 6000F 4 channel amp, my Pioneer Mono amp and hopefully my old 10inch JBL Ported Sub. I should also be using Audison RCAs I haev from my old install.

My only issue is how it will all be when all I have is one pre-amp out. Zak and Hydra says all will end up well. Wont it?

Hope to get this done before July ends.

kpzen · 3rd July 2008, 22:45

Looks like u found some new ICE installer in Idukki

speedzak · 3rd July 2008, 22:46

Welcome to the wicked world of ICING. This will be more interesting as it is a BEAST job.

You'll have to settle with high volt inputs in your amp or use RCA convertors to connect the amp to your HU.

nitrous · 3rd July 2008, 22:58

Sounds like the speakers are gonna be the new ones.
Some tips from an ICE'd Safari 2.2 owner:
1. You can mount the speakers only on the doorpads.
2. 6.5"ers seat properly. The plastic speaker pods on the doorpad will need some cutting/trimming.

jkdas · 3rd July 2008, 23:03

@ Nitrous; do enlighten more, and if possible with pix and what all went in into your 2.2L.

Pioneer GM-6000F User manual Download Site for amp manuals

Quote:

Originally Posted by speedzak

Welcome to the wicked world of ICING. This will be more interesting as it is a BEAST job.

You'll have to settle with high volt inputs in your amp or use RCA convertors to connect the amp to your HU.

6000F doesnt have high level inputs but has one RCA out and I guess this we can use to feed the 7200M mono.

7200M can take high level input I guess.

And I may have the converter that I got with the PA275. God knows where it is though:(

6000F Diagram

blueraven316 · 3rd July 2008, 23:11

The 2.2 Safari comes with 6 Inch Speaker locations, however you can put in 6.5" Components using some custom wooden mounts.

6.5" Speakers will always sound louder than the same 5.25" counterpart, and there is less choice in the market for 6" Component speakers. Considering the large cabin space the louder a good speaker can get, the better.

iraghava · 4th July 2008, 00:31

Arrey why not some red coloured Xplode or Bull to go with the red carpet Jyothi?

rider60 · 4th July 2008, 00:42

Quote:

Originally Posted by jkdas

I get an SMS from Zak. I get ideas. I get wicked ideas too. I am gonna ICE my Safari 2.2L. It should be one of a kind at TBHP.It will be a budget install. It will be done by someone who loves ICE. It will be ICEd under Zak's/Hydra's wicked eyes.

All I can reveal is that I will HAVE to use my Alpine HU, 9870, my Pioneer 6000F 4 channel amp, my Pioneer Mono amp and hopefully my old 10inch JBL Ported Sub. I should also be using Audison RCAs I haev from my old install.

My only issue is how it will all be when all I have is one pre-amp out. Zak and Hydra says all will end up well. Wont it?

Hope to get this done before July ends.

hey not fair at all, i want some pics please

, hehe well jokes apart, i am expecting this beast to have a beast of an ICE, jkdas anna i am guessing this is not going get jblifyed? hehe i used the same term you coined! cheers mate, keep us updated and i am waiting for the surprise to be revealed.

speedzak · 4th July 2008, 01:38

Quote:

Originally Posted by iraghava

Arrey why not some red coloured Xplode or Bull to go with the red carpet Jyothi?

What do you think???
It is going to be an XPLOD setup I guess!

jkdas · 4th July 2008, 08:41

Quote:

Originally Posted by iraghava

Arrey why not some red coloured Xplode or Bull to go with the red carpet Jyothi?

It maybe a Xplod setup as Zak said

Quote:

Originally Posted by rider60

hey not fair at all, i want some pics please

, hehe well jokes apart, i am expecting this beast to have a beast of an ICE, jkdas anna i am guessing this is not going get jblifyed? hehe i used the same term you coined! cheers mate, keep us updated and i am waiting for the surprise to be revealed.

JBLfyed, no. I will used the JBL sub though powered via GM7200M.

zucchero · 4th July 2008, 10:07

jk you can also clamp the amp under the seat.

zucchero · 4th July 2008, 10:13

with some cuttin you can fit the 6.5"comps.

navin · 4th July 2008, 10:24

Zucchero, you really ought to get some rubber washers between the clamps and the seat frame also how did you get the dyn tweeter to fit? What ever happened to the face plate? did you remove it?

zucchero · 4th July 2008, 10:26

jk put the tweeters in the sail panel.the massive width of the beast will help you in gettin a large sounstage.also tweeters sits at almost ear level bringing the soundstage right infront of you.
do not place them in OFF AXIS position.a slightly inward position is what i recomend.rest its all YOUR tunning and taste.

zucchero · 4th July 2008, 10:31

navinji STEG amplifiers comes with a plastic strip which serves as washer.you can see in the pics.yes i have removed the plastic cap for the tweeters.luckily with very little cuttin was done for the tweeters to fit in.

3rd July 2008, 22:22	#1
jkdas Senior - BHPian Join Date: Sep 2005 Location: Thiruvananthapu Posts: 9,685 Thanked: 1,497 Times View My Garage	ICE the Beast I get an SMS from Zak. I get ideas. I get wicked ideas too. I am gonna ICE my Safari 2.2L. It should be one of a kind at TBHP.It will be a budget install. It will be done by someone who loves ICE. It will be ICEd under Zak's/Hydra's wicked eyes. All I can reveal is that I will HAVE to use my Alpine HU, 9870, my Pioneer 6000F 4 channel amp, my Pioneer Mono amp and hopefully my old 10inch JBL Ported Sub. I should also be using Audison RCAs I haev from my old install. My only issue is how it will all be when all I have is one pre-amp out. Zak and Hydra says all will end up well. Wont it? Hope to get this done before July ends.
	() Thanks

3rd July 2008, 22:45	#2
kpzen Senior - BHPian Join Date: Oct 2004 Location: Faridabad Posts: 5,608 Thanked: 1,884 Times View My Garage	Looks like u found some new ICE installer in Idukki
	() Thanks

3rd July 2008, 22:46	#3
speedzak BANNED Join Date: Mar 2006 Location: India Posts: 4,346 Thanked: 29 Times	Welcome to the wicked world of ICING. This will be more interesting as it is a BEAST job. You'll have to settle with high volt inputs in your amp or use RCA convertors to connect the amp to your HU.
	() Thanks

3rd July 2008, 22:58	#4
nitrous Senior - BHPian Join Date: May 2004 Location: UAE/Lon/Madras Posts: 6,964 Thanked: 333 Times View My Garage	Sounds like the speakers are gonna be the new ones. Some tips from an ICE'd Safari 2.2 owner: 1. You can mount the speakers only on the doorpads. 2. 6.5"ers seat properly. The plastic speaker pods on the doorpad will need some cutting/trimming.
	() Thanks

3rd July 2008, 23:11	#6
blueraven316 Senior - BHPian Join Date: May 2006 Location: Bangalore Posts: 1,109 Thanked: 21 Times View My Garage	The 2.2 Safari comes with 6 Inch Speaker locations, however you can put in 6.5" Components using some custom wooden mounts. 6.5" Speakers will always sound louder than the same 5.25" counterpart, and there is less choice in the market for 6" Component speakers. Considering the large cabin space the louder a good speaker can get, the better. Attached Thumbnails
	() Thanks

4th July 2008, 00:31	#7
iraghava Senior - BHPian Join Date: Oct 2005 Location: Bhaiyyaland Posts: 7,993 Thanked: 281 Times View My Garage	Arrey why not some red coloured Xplode or Bull to go with the red carpet Jyothi?
	() Thanks

4th July 2008, 10:07	#11
zucchero BHPian Join Date: Sep 2006 Location: faridabad/rourkela Posts: 250 Thanked: 0 Times	jk you can also clamp the amp under the seat. Attached Thumbnails
	() Thanks

4th July 2008, 10:13	#12
zucchero BHPian Join Date: Sep 2006 Location: faridabad/rourkela Posts: 250 Thanked: 0 Times	with some cuttin you can fit the 6.5"comps. Attached Thumbnails
	() Thanks

4th July 2008, 10:24	#13
navin Team-BHP Support Join Date: Mar 2004 Location: Mumbai Posts: 25,415 Thanked: 9,980 Times	Zucchero, you really ought to get some rubber washers between the clamps and the seat frame also how did you get the dyn tweeter to fit? What ever happened to the face plate? did you remove it?
	() Thanks

4th July 2008, 10:26	#14
zucchero BHPian Join Date: Sep 2006 Location: faridabad/rourkela Posts: 250 Thanked: 0 Times	jk put the tweeters in the sail panel.the massive width of the beast will help you in gettin a large sounstage.also tweeters sits at almost ear level bringing the soundstage right infront of you. do not place them in OFF AXIS position.a slightly inward position is what i recomend.rest its all YOUR tunning and taste. Attached Thumbnails
	() Thanks

4th July 2008, 10:31	#15
zucchero BHPian Join Date: Sep 2006 Location: faridabad/rourkela Posts: 250 Thanked: 0 Times	navinji STEG amplifiers comes with a plastic strip which serves as washer.you can see in the pics.yes i have removed the plastic cap for the tweeters.luckily with very little cuttin was done for the tweeters to fit in.
	() Thanks