Originally Posted by Ramon (Post 4233028)

Maybe this is the answer.


Anyway downloading it now. Will try the update and post here.

Originally Posted by Ramon (Post 4233028)

Maybe this is the answer.


Anyway downloading it now. Will try the update and post here.

Originally Posted by moralfibre (Post 4228645)

If you are the DIY variety of bhpians, try this:

2) Follow instructions in the attached PDF to the "T"

Attachment 1654189

Originally Posted by ashbhat2 (Post 4233051)

The above PDF mentions something about 13~14 files totalling to ~3GB. I see lot of folders here for about 700~ MB. Not sure if the PDF is mentioning the update version 1740_170221.

Originally Posted by govigov (Post 4233077)

The OSS file from the bosch website will not do any good. This is just a source file released to maruti. (Or to devs). What you would need is the file that has got the correct file structure.

The UK version of the 850 software can be downloaded here - https://docs.google.com/uc?id=0B_6QK...xport=download Download this file, extract it to the root of the USB pen drive (not inside another folder) . Plug the pendrive to the slot inside the handrest of the s-cross. Then start the car. The head unit will automatically put itself to the update mode.

This was originally available from here - http://www.suzuki-forums.com/4g-2015...ainment-5.html

Originally Posted by ashbhat2 (Post 4233347)

does this UK Suzuki version have the Andriod Auto support as well ?

Originally Posted by ashis89 (Post 4233367)

My friend took his Baleno to the nearest MASS yesterday and requested for 1740 Android Auto update for the head-unit.

Originally Posted by indian21r (Post 4233624)

Which dealer is it? I see your location mentions Hyderabad?

Originally Posted by ashis89 (Post 4233652)

The MASS details are below. They are located on the Mumbai highway, on the left, 1.5 km after we cross Lingampally and proceed towards Patancheru.

Sai Service
PLOT NO. B-21 AND B-34,BHEL ANCILLARY INDUSTRIAL ESTATE,RAMACHANDRAPURAM, Hyderabad, Telangana 502032

Originally Posted by ashbhat2 (Post 4233051)

Please do update if you are able to get through it.

I downloaded the zip file and there were two other zip files inside. Extracted all of them without any error and put them in a pen drive and tried installing it, no luck. Tied with the SD card slot where we load the maps as well, no luck there either.
The SLDA system does not seem to detect the software. Don't know if these files are enough to perform an installation directly on the SLDA.



The above PDF mentions something about 13~14 files totalling to ~3GB. I see lot of folders here for about 700~ MB. Not sure if the PDF is mentioning the update version 1740_170221.

Originally Posted by BoneCollector (Post 4233046)

There are multiple zip files inside zip files. During extraction, it throws up errors so I'm not sure if it'll update or if that is the reason for failure on few occasions. Anyway, I'm not with my car these days so will wait for anyone who updates here.

Originally Posted by Ramon (Post 4233702)

I too faced the same issues and was unable to the update.

Anyway when this thread first came up I had called the Customer Care Manager of the Service Center (Indus Motors, Venpalavattom, Trivandrum). She had told me she would check and tell.

Today I called her again and she confirmed that they have received the update, but it would work only on some versions (don't know why).

Anyway she has asked me to take the car to the service center.

Planning to do so this weekend or early next week.

Other Trivandrum BHPians please note.

Will keep you updated.

Originally Posted by indian21r (Post 4233667)

Lookslike it is time to have serious conversation with my dealer as well about it:D.

By the way ashis how is friends experience with the Update after using for sometime. Is the operation fluid

Originally Posted by ashis89 (Post 4233799)

. Voice command button doesn't work while AA is working. You have touch the MIC button on the screen to start voice command. Once you exit AA and come to normal interface screen, the button starts working.

Originally Posted by govigov (Post 4233703)

Keenly following. If this is true, then it should be easily do-able. Looks like there are multiple MASS's doing the update. I am not sure why NEXA and MS is still not officially announcing the update. If one of you can talk to your friends from MASS and get the upgrade/update file it would be great as we could do the update on our own.