Originally Posted by jkdas
(Post 1300934)
Had to buy a wheel cap(alloy cap?). Bought from Kovai @ 210Rs a piece. |
Originally Posted by jkdas
(Post 1372520)
The overall service at Focus was far better than what I had received from Kulathungal Motors. |
Originally Posted by greenhorn
(Post 1372538)
JK , did you escalate their refusal? You said you planned to talk with someone.. I Can't believe those refused to do the oil change with delvac MX. Now even I'm not sure they will let me this time :mad: Either way, the recommended interval for me is 10k. Had my oil changed at 20k, and next one is 'required' at 30k, by which time my car should be out of warranty. whether they want to do my 25k service is entirely up to them |
Originally Posted by simply_sunny001
(Post 1406269)
JK, due to difference in height of quarter glass and rear window glass, i dont think we can have a straight line at the bottom, still you can try with having some extra tape at the bottom of quarter glass. But even if you remove the c pillar tape, it will also look good. cheers |
Originally Posted by benbsb29
(Post 1405848)
JK, i feel you shouldnt have blackened the C pillars. Doing the B pillar alone should have sufficed. |
Originally Posted by gowda79
(Post 1405847)
looks good Jk and i guess the blackening for the back pillars should have been more down. |
Originally Posted by raj_5004
(Post 1405894)
IMHO, the blackening on the C pillar is not neatly done. |
Originally Posted by HappyWheels
(Post 1405889)
Hey JK, The blackened pillar looks great! Gives it a new cool look. I loved it! :) |
Originally Posted by kpzen
(Post 1406058)
Thats an interesting mod. Looks different and nice from some angles.. Did you try red stickers for pillars ? :p:p |
Originally Posted by gemithomas
(Post 1406107)
Liked the b and c pillar blackening. The idea is good but the work is not neat. I think you should re-do it so that it matches the width of the glass on both sides. Yeah! You could try Red :) |
Originally Posted by simply_sunny001
(Post 1406269)
JK, due to difference in height of quarter glass and rear window glass, i dont think we can have a straight line at the bottom, still you can try with having some extra tape at the bottom of quarter glass. But even if you remove the c pillar tape, it will also look good. cheers |
Originally Posted by gemithomas
(Post 1406381)
You need to get a slightly slanted cut. Just make sure that the bottom and top ends are in line with the glass on either side with sufficient curve between. I'm sure it would look awesome.. Just see 2nd pic with a long view from the side (beside the paddy fields). You cant really make where the edges end and it looks great to me. You might need to do a few trials before fixing on the design. Try cutting out a paper/cardboard before cutting the black sticker.:) I'm wondering why no one else tried this. Try starting a little lower on the rear door, curving it up and going straight to the lower end of the rear quarter glass. |
Originally Posted by kutlee
(Post 1406430)
cool truck. enjoy. happy revving to Cherthalai. that truck stand is somewhere after alleppey i guess. |
All times are GMT +5.5. The time now is 10:27. |