MODS for scorpio 2.6dx

NIP · 8th July 2007, 12:28

Quote:

Originally Posted by rahul_intlad

Don't know if this is suitable for this thread. But does any body know how much it will cost for the side cladding on a scorpio.The base model comes without cladding hence the question.

IMO this would require drilling of holes and attraction of rust. no idea about the price sorry.

Akshay1234 · 8th July 2007, 13:15

Quote:

Originally Posted by NIP

IMO this would require drilling of holes and attraction of rust. no idea about the price sorry.

i thought the scorpio cladding was jus stuck on?

badboyscad · 8th July 2007, 13:26

guys....any ideas about sourcing , pricing of the air snorkel i was talking about...it would really support the desgin of the ride and suck cooler air

NIP · 8th July 2007, 18:46

Quote:

Originally Posted by akshay1234

i thought the scorpio cladding was jus stuck on?

what do you mean stuck on ? u mean like some glue !? lol !! its definitely got holes bro...!! u got to make sure the rust protection is very good...or its not a good idea to drill holes...

NIP · 8th July 2007, 18:49

Quote:

Originally Posted by badboyscad

guys....any ideas about sourcing , pricing of the air snorkel i was talking about...it would really support the desgin of the ride and suck cooler air

why dont you have a look at some international jeep mod sites/forums to get an idea ? i'm sure no one here has done this so no point asking.

Akshay1234 · 8th July 2007, 20:32

Quote:

Originally Posted by NIP

what do you mean stuck on ? u mean like some glue !? lol !! its definitely got holes bro...!! u got to make sure the rust protection is very good...or its not a good idea to drill holes...

yeh..

thought i read somewhere that it was stuck on.

badboyscad · 8th July 2007, 21:46

akshay..it is stuck on..i've removed the interior panel of the door..no holes seen..they use some kind of adhesive..i've seen claddings being fixed to innovas too..no holes, only sticking.

NIP · 9th July 2007, 09:48

Quote:

Originally Posted by badboyscad

akshay..it is stuck on..i've removed the interior panel of the door..no holes seen..they use some kind of adhesive..i've seen claddings being fixed to innovas too..no holes, only sticking.

i'm quite sure the scorpio has holes buddy. i remember one scorpio on the road with its fender cladding off (accident?) and it had holes running along the wheel arch...

Godfather · 9th July 2007, 09:57

Quote:

Originally Posted by NIP

i'm quite sure the scorpio has holes buddy. i remember one scorpio on the road with its fender cladding off (accident?) and it had holes running along the wheel arch...

I am not so sure about the Scorpio but the Safari surely does..
Saw a Black Safari Dicor yesterday with the Cladding taken off from the driver side door and a big dent..
Yep you guessed it.. It was lady Driven

Godfather

Flame suit on

Akshay1234 · 9th July 2007, 12:02

Quote:

Originally Posted by NIP

i'm quite sure the scorpio has holes buddy. i remember one scorpio on the road with its fender cladding off (accident?) and it had holes running along the wheel arch...

i think only the side cladding is stuck on. the rest might be screwed on.

zenopio · 9th July 2007, 15:34

Quote:

Originally Posted by akshay1234

i think only the side cladding is stuck on. the rest might be screwed on.

yup you are right ..only the fender part of the scorpio has holes ..and the rest of the cladding is stuck

badboyscad · 9th July 2007, 16:09

hi zeno..long time..you said you know a friend of kishan lohiya, can you get some details(model, sourcing and pricing) about the airsnorkel that is fitted in his ride..

zenopio · 9th July 2007, 22:13

Quote:

Originally Posted by badboyscad

hi zeno..long time..you said you know a friend of kishan lohiya, can you get some details(model, sourcing and pricing) about the airsnorkel that is fitted in his ride..

buddy i think you mistaken

...when did i say that

badboyscad · 9th July 2007, 22:33

my bad

..but someone said it and i thought it was you.anyways.do look out for some info about the snorkel buddy

ranc · 10th July 2007, 17:06

Quote:

Originally Posted by rahul_intlad

Don't know if this is suitable for this thread. But does any body know how much it will cost for the side cladding on a scorpio.The base model comes without cladding hence the question.

I got it done once for 11 K (Original Mahindra Spare part), I guess they will charge you another 1K for labour, they have to drill a lot of holes to get this thing fitted but it is not a problem, I used that car for 3 years and did not face any problems with it.

8th July 2007, 13:26	#153
badboyscad Senior - BHPian Join Date: Feb 2007 Location: TN Posts: 1,511 Thanked: 477 Times View My Garage	guys....any ideas about sourcing , pricing of the air snorkel i was talking about...it would really support the desgin of the ride and suck cooler air
	() Thanks

8th July 2007, 21:46	#157
badboyscad Senior - BHPian Join Date: Feb 2007 Location: TN Posts: 1,511 Thanked: 477 Times View My Garage	akshay..it is stuck on..i've removed the interior panel of the door..no holes seen..they use some kind of adhesive..i've seen claddings being fixed to innovas too..no holes, only sticking.
	() Thanks

9th July 2007, 16:09	#162
badboyscad Senior - BHPian Join Date: Feb 2007 Location: TN Posts: 1,511 Thanked: 477 Times View My Garage	hi zeno..long time..you said you know a friend of kishan lohiya, can you get some details(model, sourcing and pricing) about the airsnorkel that is fitted in his ride..
	() Thanks

9th July 2007, 22:33	#164
badboyscad Senior - BHPian Join Date: Feb 2007 Location: TN Posts: 1,511 Thanked: 477 Times View My Garage	my bad ..but someone said it and i thought it was you.anyways.do look out for some info about the snorkel buddy
	() Thanks