Open House at Red Rooster (Bangalore). Free dyno run, demo drives and facility tour

praful · 18th November 2010, 13:05

Quote:

Originally Posted by Ricky_63

@praful

Which car is it that is costing 1.65 for the turbo setup ?

Thanks

Cheers

I had sent them an enquiry for my Palio. But I think the costing is generic and around the same for most cars! I could be wrong though!

orangelephant · 18th November 2010, 13:48

Quote:

Originally Posted by Ricky_63

Hats off to RRP for such a brilliant setup. It inspires confidence just looking at the pictures. Wish we had something close to this here in NCR / Delhi.

Someone has posted that there was a 250 Bhp Swift they've done. Is that with the OE 1.3L engine ? (modded of course) I am curious as my Swift is also waiting to get TC'd

Thanks for sharing the pics.

Cheers

Quote:

Originally Posted by crazydiablo

It takes about 15mins to hook up a car. Very professionaly and carefully done.

Dont go by the 250hp numbers. When I saw it, it was only running about 7psi which is about 125bhp at the crank. Yeah they can take it to 250bhp at the crank again its running fully forged internals with a built engine. But I was happy about reports of turboed swift running as daily drivers at around 7-8psi.

Like i said earlier, The turbo swift at RRP puts out 119 Hp at the wheel. its running peak boost of 7.5 PSI.

crazydiablo · 18th November 2010, 16:18

So thats your swift? Amazing work.

I would also like to thank RRR for the excellent setup done, loved the dyno. Will come back for more runs.

Rudra Sen · 18th November 2010, 19:33

Quote:

Originally Posted by pranavt

Nice to see an OHC's engine on the engine stand

Where did you see that engine here? Are you talking about the one where Leela is talking to one gentleman wearing yellow T shirt?

If that's the picture you're referring then it's not an OHC's engine. You could see the HM mark on it.

Ricky_63 · 18th November 2010, 21:07

Quote:

Originally Posted by praful

I had sent them an enquiry for my Palio. But I think the costing is generic and around the same for most cars! I could be wrong though!

A Palio is far more complicated than a Swift. But at 1.65 for the "whole setup" seems good.

Imagine the Palio 1.6 putting out 200 "reliable horses" THAT is rock 'n' roll

Cheers

Quote:

Originally Posted by orangelephant

Like i said earlier, The turbo swift at RRP puts out 119 Hp at the wheel. its running peak boost of 7.5 PSI.

That seems very respectable & acceptable

Cheers

Killer · 18th November 2010, 21:10

Quote:

Originally Posted by Rudra Sen

Where did you see that engine here? Are you talking about the one where Leela is talking to one gentleman wearing yellow T shirt?

If that's the picture you're referring then it's not an OHC's engine. You could see the HM mark on it.

It is, thats an D15B OHC Vtec

fieroid · 18th November 2010, 21:55

@Rudra - That was an OHC engine.

redrage · 18th November 2010, 22:53

Guys who visited, any idea on what a stock Baleno put out on the RRR dyno?

Knight Rider · 18th November 2010, 22:58

Great setup! @GTO, I have one question though.Apart from doing all these high funda stuff, Do they provide basic servicing of aam janta cars, For E.g my alto?

Jaggu · 18th November 2010, 23:08

Quote:

Originally Posted by Knight Rider

Great setup! @GTO, I have one question though.Apart from doing all these high funda stuff, Do they provide basic servicing of aam janta cars, For E.g my alto?

Nope they don't, they offer only professional upgrade jobs, not the regular service stuff for your alto or my puny Swift D.

kutlee · 19th November 2010, 08:38

I have seen 76-78 for stock 1.5 non vtec at RRR when i just wanted to compare mine. He claimed no modifications on those cars. This was on my first visit and last visit also he shown the latest run of another city 1.5 with figures in the same range. So 22% loss on claimed 100 figure for 1.5 ohc.

Rudra Sen · 19th November 2010, 08:51

Quote:

Originally Posted by Killer

It is, thats an D15B OHC Vtec

Quote:

Originally Posted by fieroid

@Rudra - That was an OHC engine.

Guys, thanks a lot for correcting me. Now could you guys tell me what's that HM indicates? Is it some abbreviation? If yes then what's the full form?

Open House at *Red Rooster (Bangalore)*. Free dyno run, demo drives and facility tour-question.jpg

Samurai · 19th November 2010, 08:55

Quote:

Originally Posted by Rudra Sen

Guys, thanks a lot for correcting me. Now could you guys tell me what's that HM indicates? Is it some abbreviation? If yes then what's the full form?

Hmm, may be Honda Motors?

megazoid · 19th November 2010, 10:55

My ohc vtec showed 76hp at the wheels. My car has done about 1,30000 kms. The mods I have is a clogged airfilter and headers with FFE. Don't think these mods can alter the basic hp by much. Two other vtecs that came there also got their dyno figures and both showed lesser hp but the vtec wasn't getting activated on both of them. They were showing hp in the range of 60-62 if memory serves me right.

Captain Slow · 19th November 2010, 12:15

I might go there tomorrow/the day after. Anyone else going there?

18th November 2010, 16:18	#48
crazydiablo BHPian Join Date: May 2004 Location: Bangalore/San Francisco Posts: 854 Thanked: 28 Times View My Garage	So thats your swift? Amazing work. I would also like to thank RRR for the excellent setup done, loved the dyno. Will come back for more runs.
	() Thanks

18th November 2010, 21:55	#52
fieroid BHPian Join Date: Mar 2005 Location: bangalore Posts: 706 Thanked: 306 Times	@Rudra - That was an OHC engine.
	() Thanks

18th November 2010, 22:53	#53
redrage BHPian Join Date: Mar 2005 Location: Bengaluru Posts: 557 Thanked: 106 Times	Guys who visited, any idea on what a stock Baleno put out on the RRR dyno?
	() Thanks

18th November 2010, 22:58	#54
Knight Rider BHPian Join Date: Oct 2005 Location: Bangalore Posts: 283 Thanked: 28 Times	Great setup! @GTO, I have one question though.Apart from doing all these high funda stuff, Do they provide basic servicing of aam janta cars, For E.g my alto?
	() Thanks

19th November 2010, 08:38	#56
kutlee Senior - BHPian Join Date: Jul 2005 Location: Hyderabad Posts: 1,141 Thanked: 233 Times View My Garage	I have seen 76-78 for stock 1.5 non vtec at RRR when i just wanted to compare mine. He claimed no modifications on those cars. This was on my first visit and last visit also he shown the latest run of another city 1.5 with figures in the same range. So 22% loss on claimed 100 figure for 1.5 ohc.
	() Thanks

19th November 2010, 10:55	#59
megazoid BHPian Join Date: Oct 2005 Location: Bangalore Posts: 578 Thanked: 4,251 Times View My Garage	My ohc vtec showed 76hp at the wheels. My car has done about 1,30000 kms. The mods I have is a clogged airfilter and headers with FFE. Don't think these mods can alter the basic hp by much. Two other vtecs that came there also got their dyno figures and both showed lesser hp but the vtec wasn't getting activated on both of them. They were showing hp in the range of 60-62 if memory serves me right. Last edited by megazoid : 19th November 2010 at 10:58.
	() Thanks

19th November 2010, 12:15	#60
Captain Slow Senior - BHPian Join Date: Mar 2010 Location: Bangalore Posts: 1,613 Thanked: 2,202 Times	I might go there tomorrow/the day after. Anyone else going there?
	() Thanks

Open House at *Red Rooster (Bangalore)*. Free dyno run, demo drives and facility tour

Open House at Red Rooster (Bangalore). Free dyno run, demo drives and facility tour