[Vikram Arya]

Originally Posted by Sajimu

I need the pcd and cb for Toyota corolla 2005 9th gen

For 9th gen Toyota Corolla marketed in A-PAC markets, PCD was 4X100, and the center bore was 54.1mm. Additionally, the thread size was M12X1.5 and the tightening torque for lug nuts was 110Nm.

Hope this helps.

[Surprise]

Originally Posted by zacs

Though the offset (35 - 42 ), Bore (57.1) and number of holes (5) are the same for octavia and superb, the respective PCD is 100 and 112. Experts please throw some light on the same.

Octavia PCD 100 or 112?? Can someone clarify what is the PCD for generation 3 Octavia

[ashutoshb]

After fitting 16x7J wheels on my Kushaq Ambition, the ride quality went for a toss. So, I switched back to the stock 16x6J wheels.

But, I don't like their look at all and still want to change them.

16x6J 100 pcd 5 holes is a size, which is pretty rare. Ride quality is very important to me, so I am looking at stock wheels of other cars as an option.

Till now I have only found the Rapid Monte Carlo, which has the wheels of my liking.

Fellow BHPians, are there any other cars which have wheels of the pattern?

[dr_TJ]

What is the PCD of the new Mahindra Thar?
I own a Mahindra Thar LX Diesel HT AT with 18 inch Alloy wheels.
I plan to install R16 zero offset steel rims.

[viky_s]

Originally Posted by Surprise

Octavia PCD 100 or 112?? Can someone clarify what is the PCD for generation 3 Octavia

Gen 3 Octavia PCD is 112 5 bolt

[Revention]

Anybody knows PCD for XUV700 and Scorpio N ?

[BANDHAV]

Originally Posted by Revention

Anybody knows PCD for XUV700 and Scorpio N ?

XUV7oo is 114.3, 5 lugs and going by the Trend Scorpio N will be same too.

[ohaak]

This website has a quick look up for most of the PCDs for cars in India.

https://alloywheelskart.com/

[Kaumad]

Originally Posted by Revention

Anybody knows PCD for XUV700 and Scorpio N ?

I am not sure about the authenticity of the site though.
This site says ScorpioN and Thar are the same. XUV7OO is larger.

https://www.wheel-size.com/size/mahi...corpio-n/2022/
https://www.wheel-size.com/size/mahindra/xuv700/2022/
https://www.wheel-size.com/size/mahindra/thar/2022/

[VGDelhi]

Originally Posted by rks

The figures you see in that website are for the range of Aura alloys available -- they do not say what exactly are the figures for the stock rims on various cars. Thus for Santro you see a number of suggested alloys-- the offset for these choices varies from 38 to 42 mm, and for each choice of alloy different PCD options are available -- I presume only one PCD will fit the car, and there is no indication as to what is the precise offset for the stock rims. I am told that that the stock rims for the old Santro and the Xing have different specifications.

I would like to suggest that the scope of this thread be expanded to include PCD, offset, wheel rim size (dia and width) and hub diameters for each car -- that would be very useful.

Hi, I am looking for a set of 15" 5Hole/114.3 wheel rims for modifying my dodge kingsway 1957 preferably wired spokes or steel dish types. All help will be deeply appreciated. Thanks