Hey Guys,
My ICE setup is as follows:
1) Head Unit: Pioneer AVH-P6850DVD
2-DIN 7" Wide In-Dash Fully Motorized LCD Color Display with 4-Channel High-Power 6-Disc Multi-DVD/VCD/CD Receiver
Features
DVD auto play
Bookmark play (6 discs)
iPod adapter ready
Bluetooth adapter ready
Built-in MPEG 2/1 decoder
Built-in decoder (Dolby Digital)
6-disc CD/DVD changer
96 kHz/24-bit DAC (for audio)
10-bit video DAC
EEQ
5-mode preset equalizer
1-mode custom preset equalizer
3-band parametric equalizer
HPF
4-mode staging (Music Studio/Dynamic Theater/Actors Stage/Relax Living)
5 wide screen modes (Just/Full/Cinema/Zoom/Normal)
3 RCA preouts (front + rear + subwoofer)
IP-Bus input
A/V inputs and outputs
Optical digital output (DTS, Linear PCM)
AV-Bus input
2 RCA Audio/Video inputs (input 1: Audio/Video, input 2: Audio/Video or backup camera)
1 RCA Video output (rear)
Backup camera input
RGB input (26-pin)
Multi-channel processor (DEQ-P7650) control
Connectable with AVG-VDP1 Vehicle Dynamics Processor
External unit control via IP-Bus (2 units)
AUX-in (with mini jack and optional CD-RB10 and CD-RB20)
Level indicator
Spectrum analyzer
Joystick remote control
Multi-language guide - caution message only (English/Spanish/Portuguese/Traditional Chinese)
LCD MONITOR
7" wide TFT active matrix LCD color screen
AG (Anti-Glare) coated LCD color screen
Virtual GUI (Graphic User Interface)
Fully motorized unit with display angle adjustment (5 steps )
New split-screen IC
Built-in GDC (Graphics Display Controller)
2) RCA & POWER CABLING: SCOSCHE EFX
Part#: AKPA4BL
BLUE DUAL AMP P/A WRE KT
Blue / Silver EFX 4 gauge Dual Amp Power and Audio Kit (Includes 2 - A17G2BL twisted pair RCA's)
3) DAMPING: Fwd Speakers: FOCAL Propritery Damping with MDF resonance damping rings.
Rear Fillers: FOCAL Propritery & Dynamat
Subs (In The Boot): 3RAX Antivibration Fluid & Dynamat.
4) FORWARD COMPONENTS:
TWEETER: FOCAL TN 45 Polyglass
Max Power Handling:100 W
Nominal Power Handling: 15 W
Sensitivity: 92 dB
Freq Response: 3 kHz - 20 kHz
Size: 45mm (1-3/4")
Titanium inverted dome
Phase plug
Néodimium magnet,
20 mm (3/4") ferrofluided v.coil
WOOFER: FOCAL 6 K2
165mm (6-1/2") midbass,
40mm (1-3/8") v.coil, 100mm (4") magnet
Max Power Handling: 200 W
Nominal Power Handling: 100 W
Sensitivity: 92 dB
Freq Response: 60 Hz - 20 kHz
CROSSOVER: FOCAL FA K2
2-way separate high-pass crossover
18 dB/oct. (3,5 kHz)
Adjustable tweeter level
5) REAR COMPONENTS: FOCAL 690CV1 Polyglass
Product type: Coaxial kit
Depth from wall: 93.1mm (3.7")
Cut-out diameter: 149x222mm (5.9"x8.7")
Voice coil: 32mm (1.3")
Magnet: 90mm (3.5")
Woofer: 164x235mm (6"x9") Polyglass cone
Tweeter: Aluminum inverted dome
Nominal impedance: 4 Ohms
Frequency response (+/-3dB): 50Hz - 20kHz
Sensitivity (2.83V/1m): 93dB
Nom. power: 80W
Max. power: 160W
Description: Coaxial 164x235mm elliptical (6"x9") kit, built in crossover, rotating tweeter.
6) COMPONENT AMP: ALPINE MRP-F250 (Driving components @ 4ohms)
4/3/2 Channel Operation
High Temperature Protection
Subsonic Filter
Bass EQ Circuit
Adjustable Crossover (HP/LP)
MOSFET Power Supply
DC-DC PWM Power Supply
Discrete Pre-Amp Stage
STAR Circuitry
Auto Over-Current Protection
MultiMode
Top Mounted Blue LED Power/Status Indicator
Input Channel Selector
Gold Plated RCA Input Connectors
Continuously Adjustable Gain Control
Speaker Level Inputs
Gold Plated Power Screw Terminals
Gold Plated Speaker Terminals
4-Layer Glass Epoxy PC Board
CEA-2006 Power Rating (40hm at 14.4V = 1%THD+N), S/N 80dBA (Ref. 1W into 4Ohm): 40W x 4
RMS Power (at 14.4V THD+N, 20Hz-20kHz)
Per channel into 4 ohms: 40W x 4 (0.08% THD)
Per channel into 2 ohms: 75W x 4
Brigded 4 ohms: 180W x 2
Bass Engine® Sound Tuning
Crossover Frequency : 50Hz - 400Hz HP/LP/Off(-12dB/oct)
Subsonic Filter (Fixed): 15Hz
Bass EQ Frequency (Fixed): 50Hz +12dB (Ch-3/4) On/Off
Dimensions
Heat Sink (WxHxD) mm: 232mm x 241mm x 60mm
Foot Print (WxHxD) mm: 279mm x 241mm x 60mm
General
Power Requirements: 14.4V DC (11V to 16V)
Fuse Type: 15A x 2
Frequency Response: 10Hz - 50kHz (+0,-1dB)
Signal to Noise (S/N): 100dBA (Reference to Rated Power)
Input Sensitivity (For Rated Power): 0.2V to 4.0V (1.0 at Center Detent)
Input Impedance: 10k Ohm
Speaker Impedance: 4 or 2 ohm Bridged
Weight: 2.7 Kg
7) SUBWOOFER AMP: KICKER ZX 1000.1
Class: D
RMS Power @ 14.4 V In Watts @ 2ohms Mono <1.5% THD+N: 1000
Length: 425mm
Ht: 54mm
Width: 244mm
Freq Response: 20Hz - 200Hz
Signal To Noise Ratio: >95 dB, a-weighted, @ rated power
Input Sensitivity: 125mV - 5V low level, 250mV - 10V high level
Electronic Crossover: Variable Low-Pass, 50-200Hz, 24dB per octave
Defeatable High Pass 12dB per octave @ 25Hz
Bass Boost: Variable 0 to +18dB boost @ 40Hz
8) SUB WOOFERS: KICKER CompVR DCVR 12 (Dual 12 inchers with enclosure)
Nominal impedence (Ohm): 2
Sensitivity (SPLo),dB @ 1W, 1m: 98
Power Handling Watts, Peak (RMS): 1600,(800)
9) CAPACITOR: EARTHQUAKE
MODEL: PHC-15
Max Power: 2000 Watts
Capacity: 1.5 Farad
PCB working status flash blue LEDs
Fluorescent cap ring
Digital voltage meter
High-current handling
Polarity protection circuit
Audible voltage protection circuit
Lowest E.S.R. 24 VDC foil with maximum moment discharge.
Working Voltages: 10-24VDC
I spent 5 continuous days from 10am - 10pm getting it right...the damping, especially the liquid damping took the longest time to dry (total of 10hrs).
But it is finally finished!!