Getz Prime 1.5 CRDi - Bright Silver EDIT: 74,000 kms update

aks_karthik · 19th July 2008, 14:21

so many dealers are here in chennai.
Already i changed my seat cover,door trims and steering Wheel in my WagonR in friend's shop.
I planned to change seat cover,door trims and steering Wheel for the new GetZ from the same shop.
But after seeing your thread i just need to have a look on stalion and finalze where to change the seats.

undead · 19th July 2008, 18:17

I have sent a mail to Hyundai asking about the Rim size. Lets wait and see what reply they give.

aks_karthik · 19th July 2008, 18:27

Quote:

Originally Posted by undead

I have sent a mail to Hyundai asking about the Rim size. Lets wait and see what reply they give.

Already i sent a mail to Customer Care and called up in Toll Free Number.
I got a reply mail stating some technical Guy will call me within 3 days.
Toll Free Number is useless.
They don't know any technical details.They also told the same story as the mail i received.
Just let me know once you get the reply.
Mail from Hyundai :
Dear Customer,
This has reference to your mail regarding your Hyundai vehicle.
Please note that we are in receipt of your e-mail, we shall be advising our concerned Regional Office to coordinate with our dealer to arrange for necessary action to address your concern. You shall be hearing from our Dealer / Area Office within 3 working days. Please bear with us till such time.
In case you are not contacted within 3 working days, you may contact our Regional Offices from Monday to Friday between 8 am till 6 pm at:-
HMIL North Regional Office Service Support Ms. Jayshree 011-66241100
Sales Support Mr.Ashok 011-66241100
HMIL West Regional Office Service Support Mr. Shivram 022-40969028
Sales Support Ms. Juanita 022-40969035
HMIL East Regional Office Service Support Mr. Chaitanya 033-40060047
Sales Support Ms. Subhadra 033-40060047
HMIL South Regional Office Service Support Ms. Latha 044-42204623
Sales Support Mr. Sivakumar 044-42204674
For any queries/complaints on product and service you may also reach us at our 24X7 Customer Care Toll Free Number: 1800-11-4645 (From MTNL/BSNL) or 9873564645 from others.

Thanking you and assuring you of our best possible services at all times.
Regards
Customer Relations
Hyundai Motor India Ltd.

undead · 20th July 2008, 06:56

Seat Covers fitted . Cost Rs.6000 . Leather Steering Grip - Rs.450. The rear head rests didnt fit neatly enough.

Getz Prime 1.5 CRDi - Bright Silver EDIT: 74,000 kms update-100_1857.jpg

Getz Prime 1.5 CRDi - Bright Silver EDIT: 74,000 kms update-100_1858.jpg

Getz Prime 1.5 CRDi - Bright Silver EDIT: 74,000 kms update-100_1860.jpg

Getz Prime 1.5 CRDi - Bright Silver EDIT: 74,000 kms update-100_1861.jpg

Getz Prime 1.5 CRDi - Bright Silver EDIT: 74,000 kms update-100_1865.jpg

aks_karthik · 20th July 2008, 09:41

seems stalion seat cover is not as good as what i had in my wagonR.
I donno the brand but we stiched newly for the car and the fitting was very neat and clean.
check my Garage photos.
After 3 years,it looks like a new one.
so i prefer to go the my Freind's shpp for seat cover.

Please let me know the GetZ Crdi rims offset.

I enquired some many people regarding fitting Verna Crdi Sx ABS stock rims in GetZ Crdi.
Verna Crdi Sx ABS stock rims are 14 inches and 5.5J and 100PCD.
But Hyundai techincal guys tols it won't fit in GetZ.
They haven't had knowledge in PCD and offset issues.
Please let me know whether it's possible to fit Verna Crdi Sx ABS stock rims in GetZ Crdi.
I want to upgrade to 195/14/60 tyres without going for alloys.

Vivek.Martin · 21st July 2008, 08:37

Getz CRDi's Offset is 38. It's a 14" Rim with 100 PCD and 5.5J. I am quite sure the Verna's Offset is different, though the other specs are the same.
Any strong reason you want the rims of the Verna? Either ways, you aren't upsizing and the stock Verna rims aren't really eye candy, so whats the point?

undead · 21st July 2008, 10:16

Quote:

Originally Posted by Vivek.Martin

Getz CRDi's Offset is 38. It's a 14" Rim with 100 PCD and 5.5J. I am quite sure the Verna's Offset is different, though the other specs are the same.
Any strong reason you want the rims of the Verna? Either ways, you aren't upsizing and the stock Verna rims aren't really eye candy, so whats the point?

You are correct about the Offset and PCD , but the rim size is 14" 5J only and not 5.5J

aks_karthik · 21st July 2008, 11:43

Quote:

Originally Posted by Vivek.Martin

Getz CRDi's Offset is 38. It's a 14" Rim with 100 PCD and 5.5J. I am quite sure the Verna's Offset is different, though the other specs are the same.
Any strong reason you want the rims of the Verna? Either ways, you aren't upsizing and the stock Verna rims aren't really eye candy, so whats the point?

Just i want to upgrade to 195/60/R14 tyres and not going for alloys
It's recommended min Width is 5.5J.
I heard the GetZ Crdi rims is 5J only.
so i planned to fix Verna stock rims which is 5.5J

Vivek.Martin · 21st July 2008, 13:45

Quote:

Originally Posted by undead

You are correct about the Offset and PCD , but the rim size is 14" 5J only and not 5.5J

Oops...sorry..got that wrong

aks_karthik · 21st July 2008, 20:35

hey lemme tell one thing
whether i can use Michelin XM1+ 185/65/14 in GetZ Crdi Stock rims
I know it has 2.23 % difference in circumference
as i know till 2.5% is acceptable right
if i won't go for Alloys i go for Michelin XM1+ 185/65/14
No other way hmmmm....

undead · 21st July 2008, 20:40

Quote:

Originally Posted by aks_karthik

hey lemme tell one thing
whether i can use Michelin XM1+ 185/65/14 in GetZ Crdi Stock rims
I know it has 2.23 % difference in circumference
as i know till 2.5% is acceptable right
if i won't go for Alloys i go for Michelin XM1+ 185/65/14
No other way hmmmm....

You can go for 185/60R14 in Stock rims . The difference is 0.94% only. This size is available in Michelin XM1+. Next week i am going to buy alloys 14" 6J and fit Stock tires in it.

aks_karthik · 21st July 2008, 20:51

the problem in 185/60/14 is it reduces the GC by -5mm
so that i planned for 185/65/14,it increases GC by 13 mm
already GetZ GC is 160mm only added to 13mm increases 170+ na

undead · 21st July 2008, 21:30

Quote:

Originally Posted by aks_karthik

the problem in 185/60/14 is it reduces the GC by -5mm
so that i planned for 185/65/14,it increases GC by 13 mm
already GetZ GC is 160mm only added to 13mm increases 170+ na

Then you need to fit alloys (14" 6J) and go for 195/60R14 which i am planning to do .

aks_karthik · 21st July 2008, 21:35

yes i too searched for some good alloys.
But I am often going to my native.so alloys is not as good as stock rims.
If any puncture while travelling,those tyre wala's donno how to take away tyre from Alloys.they just used some iron rods and hammer.
Already we faced severe crack in Brother's verna alloys.
So i prefer Stock rims with maximum upsizing.
if it's not getting through then i go for alloys.
have you selected Alloy rims.
please share it to me.

undead · 21st July 2008, 21:42

Quote:

Originally Posted by aks_karthik

yes i too searched for some good alloys.
But I am often going to my native.so alloys is not as good as stock rims.
If any puncture while travelling,those tyre wala's donno how to take away tyre from Alloys.they just used some iron rods and hammer.
Already we faced severe crack in Brother's verna alloys.
So i prefer Stock rims with maximum upsizing.
if it's not getting through then i go for alloys.
have you selected Alloy rims.
please share it to me.

I am forced to go for alloys as the rim width is 5J only . Else i would have fitted 195/60 in stock rims itself. I am planning to go for HR alloys . My friend bought 5 alloys for his baleno 14" 6J costing Rs.3500 per alloy. Not sure about the price now , i am going this weekend to check it out . Also i am little concerned about the fact that the stock tires are tube type and if i fit them in alloys , at times of puncture iron rods and hammer may come into play.
Your best choice in Stock rims is 185/60 .

19th July 2008, 14:21	#391
aks_karthik Senior - BHPian Join Date: Sep 2005 Location: Chennai Posts: 1,947 Thanked: 341 Times View My Garage	so many dealers are here in chennai. Already i changed my seat cover,door trims and steering Wheel in my WagonR in friend's shop. I planned to change seat cover,door trims and steering Wheel for the new GetZ from the same shop. But after seeing your thread i just need to have a look on stalion and finalze where to change the seats.
	() Thanks

19th July 2008, 18:17	#392
undead Senior - BHPian Join Date: Jan 2008 Location: Bhavani - Komarapalayam Posts: 1,193 Thanked: 179 Times	I have sent a mail to Hyundai asking about the Rim size. Lets wait and see what reply they give.
	() Thanks

20th July 2008, 06:56	#394
undead Senior - BHPian Join Date: Jan 2008 Location: Bhavani - Komarapalayam Posts: 1,193 Thanked: 179 Times	Seat Covers fitted . Cost Rs.6000 . Leather Steering Grip - Rs.450. The rear head rests didnt fit neatly enough.
	() Thanks

20th July 2008, 09:41	#395
aks_karthik Senior - BHPian Join Date: Sep 2005 Location: Chennai Posts: 1,947 Thanked: 341 Times View My Garage	seems stalion seat cover is not as good as what i had in my wagonR. I donno the brand but we stiched newly for the car and the fitting was very neat and clean. check my Garage photos. After 3 years,it looks like a new one. so i prefer to go the my Freind's shpp for seat cover. Please let me know the GetZ Crdi rims offset. I enquired some many people regarding fitting Verna Crdi Sx ABS stock rims in GetZ Crdi. Verna Crdi Sx ABS stock rims are 14 inches and 5.5J and 100PCD. But Hyundai techincal guys tols it won't fit in GetZ. They haven't had knowledge in PCD and offset issues. Please let me know whether it's possible to fit Verna Crdi Sx ABS stock rims in GetZ Crdi. I want to upgrade to 195/14/60 tyres without going for alloys. Last edited by aks_karthik : 20th July 2008 at 09:44.
	() Thanks

21st July 2008, 08:37	#396
Vivek.Martin BHPian Join Date: Jun 2008 Location: Garden (Garbage?) City Posts: 109 Thanked: 0 Times	Getz CRDi's Offset is 38. It's a 14" Rim with 100 PCD and 5.5J. I am quite sure the Verna's Offset is different, though the other specs are the same. Any strong reason you want the rims of the Verna? Either ways, you aren't upsizing and the stock Verna rims aren't really eye candy, so whats the point?
	() Thanks

21st July 2008, 20:35	#400
aks_karthik Senior - BHPian Join Date: Sep 2005 Location: Chennai Posts: 1,947 Thanked: 341 Times View My Garage	hey lemme tell one thing whether i can use Michelin XM1+ 185/65/14 in GetZ Crdi Stock rims I know it has 2.23 % difference in circumference as i know till 2.5% is acceptable right if i won't go for Alloys i go for Michelin XM1+ 185/65/14 No other way hmmmm.... Last edited by aks_karthik : 21st July 2008 at 20:36.
	() Thanks

21st July 2008, 20:51	#402
aks_karthik Senior - BHPian Join Date: Sep 2005 Location: Chennai Posts: 1,947 Thanked: 341 Times View My Garage	the problem in 185/60/14 is it reduces the GC by -5mm so that i planned for 185/65/14,it increases GC by 13 mm already GetZ GC is 160mm only added to 13mm increases 170+ na
	() Thanks

21st July 2008, 21:35	#404
aks_karthik Senior - BHPian Join Date: Sep 2005 Location: Chennai Posts: 1,947 Thanked: 341 Times View My Garage	yes i too searched for some good alloys. But I am often going to my native.so alloys is not as good as stock rims. If any puncture while travelling,those tyre wala's donno how to take away tyre from Alloys.they just used some iron rods and hammer. Already we faced severe crack in Brother's verna alloys. So i prefer Stock rims with maximum upsizing. if it's not getting through then i go for alloys. have you selected Alloy rims. please share it to me.
	() Thanks