[Mr.Boss]

Originally Posted by Mr.Boss

The one in foreground is another RX100 getting restored. It belongs to one of our fellow member.

EDIT: Potential, soon to be a member

Fresh out of the oven, delivered today
Fully restored RX100



List of modifications:
- 2.75 x 18 & 3.00 x 18 tires
- Front fork and disc brake assembly from Classic Pulsar
- Front mudguard from Max100R
- Center lock from RXZ
- HL reflector from Autopal (H4)
- Crank case sticker (YEIS) from RX135 (Couldn't find the plain sticker)
- Tools box from RX135

[v12]

Simple and yet so elegant. I wonder When my RX100 is going to look like that. What tyres are these? MRF Zappers?

[Mr.Boss]

Originally Posted by v12

Simple and yet so elegant. I wonder When my RX100 is going to look like that.

Say YES, can be done in a month

Originally Posted by v12

What tyres are these? MRF Zappers?

CEAT Secura

[utkarshshukla92]

Originally Posted by Mr.Boss

Fresh out of the oven, delivered today
Fully restored RX100

This is absolute my version of the RX100/135, Simple black paint job and classic golden lines on the tank with that pulsar disc and thats it, no other changes to anything. Though black is the most common color on RX but I think it makes those classic lines stand out.

[Ajay_the_Don]

The bike looks fresh indeed Boss.

Originally Posted by Mr.Boss

- Front fork and disc brake assembly from Classic Pulsar

How much does it cost for this upgrade? I just upgraded both the tires and will it fit the same setup?

I also browsed the Splendor disc and alloy setup for RX. Is it a feasible mod?

[utkarshshukla92]

Originally Posted by Ajay_the_Don

How much does it cost for this upgrade? I just upgraded both the tires and will it fit the same setup?

I also browsed the Splendor disc and alloy setup for RX. Is it a feasible mod?

Here in Delhi/UP, pulsar disc setup with forks, rim, hub and master cylinder cost any where between 3.5 to 6k depending up the condition. Pulsar spoke rim is also 18 inch so same tyre will fit. No need to change the rear tyre.

IIRC splendor never came with discs and it has 17 inch alloys so it wont we a direct swap. If you want alloys with disc brakes, best option would be Yamaha gladiator.

[Mr.Boss]

Originally Posted by Ajay_the_Don

How much does it cost for this upgrade?

Unfortunately we had to spend a lot this time
Around 5k for the used front end (including a brand new steel mud guard from Max100R)
1k for the new rim, spokes and bearing
1k for one fork tube (used one had excess wear near oil seal area) oil, oils seal
1k for speedo worm gear, cable, fork boots, master cylinder repair kit, wheel truing

Originally Posted by Ajay_the_Don

I just upgraded both the tires and will it fit the same setup?

Yes, if they are 18"

Originally Posted by Ajay_the_Don

I also browsed the Splendor disc and alloy setup for RX. Is it a feasible mod?

Yes

Originally Posted by utkarshshukla92

IIRC splendor never came with discs

Splendor did came with factory installed disc brake in front

Originally Posted by utkarshshukla92

it has 17 inch alloys so it wont we a direct swap.

Both alloy & steel wheels are 18"

[utkarshshukla92]

Splendor did came with factory installed disc brake in front
Both alloy & steel wheels are 18"

is that a direct fit on the Rx or will it require some modification. I am asking because i wish to install alloys and front disc on my RX100 and so far I have been unlucky in finding a donor gladiator.

[Mr.Boss]

Originally Posted by utkarshshukla92

is that a direct fit on the Rx or will it require some modification. I am asking because i wish to install alloys and front disc on my RX100 and so far I have been unlucky in finding a donor gladiator.

I know a couple of splendors running with Pulsar disc brake set-up. So I assume it should be a direct fit.
TBH finding a donor gladiator is far easy than a splendor with disc

[TheHelix0202]

Originally Posted by Prathiiik

Here's my '86 RX 100

Attachment 2097569

Attachment 2097568

Lovely, clean looking machine! You’ve done a good job maintaining her! Enjoy her for many miles!

P.S: couldn’t reply to your PM, as your inbox is full. :coldswea Please PM me your WA no. Thanks!

[Prathiiik]

Originally Posted by TheHelix0202

Lovely, clean looking machine! You’ve done a good job maintaining her! Enjoy her for many miles!

P.S: couldn’t reply to your PM, as your inbox is full. :coldswea Please PM me your WA no. Thanks!

Thankyou for the kind words, man.

Will do, didn't notice

[Mr.Boss]

Latest restoration









Details here
https://www.team-bhp.com/forum/motor...ml#post5126259

[Ajay_the_Don]

I am facing a peculiar issue of oil leak post a ride. The oil drips underneath the center stand. It drips slowly, abelite to a few drops, and stops. It does not leak further until parked after the next ride.

Here are some pics.




Is this a packing issue?

Also, weird that the autopump 2T oil gets over soon. 1L for around 250 to 300 kms. How long do the levels last generally? Suspect, there might be a pump leak too.

[Mr.Boss]

Somehow I fell in low with this shade

[tavakari]

Hello All,

I have a RX100 -1990 model, and looking for a suggestion for front and rear tube-type tyres for my bike.

Front:
2.75X18

Rear:
3.00X18

Preferred brand: Michelin
Considering the road conditions, I prefer tyres for a good road grip in both wet and dry conditions. I don't have disc-brakes.

Budget:
Less than Rs.3000/- per tyre.

Kindly share me your experience and expert suggestion.

Thank you.