Team-BHP - RE Classic 350 - Initial ownership

Hey EssYouWe,

Not comparing it with the CI but the bike sounds very nice apart from the engine rattle, at least the bullet character is not lost, we all know evolution changes things. I am personally a CI fan but individually this is a great bike. The classic looks with different tires is refreshing.
Is handling and ride better with smaller diameter tires or worse as compared to 19 inchers.

Regards

Pranav

Quote:

Originally Posted by Rennjit (Post 1642347)

one quick question, for cl350 where does the air filter element sit- inside Triangular box (has Cl350 sticker) or Oval shaped (near carb)?
RE's web pictures a 500 in info list of 350.

Air filter is inside right side triangular box. Oval shaped box covers a regular square shaped plastic box which is connected to air filter box on one end and carburetor on the other. Yes, bad design.Tool pouch( leather pouch) is placed inside the left side box.

I took the bike to the service center and asked the guy there to check out the sound. He told me it sounds pretty normal but he did not sound very convincing.

The odo is at 400 kms. Another 100 and I'll haul it in for the first service. Hopefully things will improve after oil change.

The mechanic at RE advised me against the upswept before 3000kms. :(
What is your take on this Gurus?

A question: I have kept it below 60 till now. Can I push the bar to 70 or 65 abouts now?

Quote:

Originally Posted by NDMS (Post 1645320)

Well I tried to ride Shantanu's STD (and failed miserably stupid: ) and it felt much lighter than the Classic. After a pretty long discussion with Navpreet, we concluded it must be the smaller and wider tires.

So, it isn't as light as you might feel a Std. to be. The handling and cornering is just plain awesome.
I have no words to express the ease with which it takes corners at high speeds.

The ride quality seems decent enough.

One thing was that the handle bars aren't too kind on the wrists. A bit higher would have been definitely more comfortable.

@Navpreet:

The clutch is the same. My grip on it however, is closer to the right than it is on your LB. I think I'll get it pulled up a bit. That should ease the grip.

Go ahead and twist the throttle. You wont have any problem or side effects if you touch 100 just don't hold on to that speed. 70 is safe.

It's better if you wait at least for another 1500k before you go for upswept. Let your engine set in nicely before you can reduce the back pressure with the upswept. I should remind you that upswept is illegal on roads and it's for off road purpose only;)

Quote:

Originally Posted by EssYouWe (Post 1652997)

A question: I have kept it below 60 till now. Can I push the bar to 70 or 65 abouts now?

You could try touching 70 for a few seconds, and then go down to 50-60. Then repeat the process 10-15 times, each time increasing the time spent on 70, before slowing down. Once this is done you will be able to go up to 70 whenever required (but don't cruise at 70 for long periods till your bike has been fully run-in).

But what is your hurry? You could easily go at 70, 80, 90, or even 100. But will you able to stop at those speeds in an emergency (say, when going through a blind turn you find yourself confronted by an idiot SUV driver trying to overtake a truck on that turn, covering the entire expanse of the road)? Till you have mastered using your brakes, especially the powerful front brake, don't go to high speeds.
At the risk of sounding like your Uncle, I repeat :D

Quote:

Originally Posted by Rollin' Thunda (Post 1625888)

Once you are comfortable on your bike, with a few hundred km done, I would strongly urge you to learn and regularly practice these two emergency measures:

1. Swerving (using counter-steering)
2. Emergency braking (using both brakes).

You have to be EXTREMELY careful while learning these. Start from low speeds and slowly work your way up to say 50 Kmph over several weeks. Never practice on a road which has traffic. Be VERY careful with the front brake (squeeze it gently as you would an orange, DONT grab) as it can lock-up the wheel (RE bikes seem to have a particular problem with this). The possibility of wheel lock-up --- and then skidding and falling --- during an emergency situation is why you need to practice emergency braking in the first place.

for more info check this: Motorcycle Safety Site ("Motorcycle tips and techniques" )

Oh I am very comfortable with my bike's handling and had tried most of the possible safety maneuvers a long time back.

The Classic is rather easygoing on the rider. It handles with awesome surety and the brakes never feel like locking up.
;)

I am in no hurry to touch any high speeds! I probably won't even go to 100 after 3k kms. :P

I am very very paranoid about running my vehicles in properly. Chances are I will fall under a bus but not pull on the throttle. I know its irrational and I am working on reducing it.

Every time I do things even a bit different from the way they are to be done in my book, my heart just sinks. So, I was looking for someone to tell me that its okay... a 70 once in a blue moon won't kill my Bull. :D

On another note, I have been running it in exactly like you illustrated. I haven't held on to a speed yet, keep changing it continuously.

Another thing... Please help me make the seat more comfortable. I don't want to give up on the looks, but a bit of rear-side support would go a long way!

Hey sorry for the bad quality of pictures. Clicked them just now in the office parking lot through my cell camera-n-flash.

Will click betters ones tomorrow and upload them if needed.

This seat works great when it comes to providing comfort and cushion to the back and trust me it ensures no backaches or fatigue as it actually feels like a sofa-seat. Even the rear seat has been customized to provide maximum comfort to the pillion.

Let me know if you need more details and I shall be obliged to help.

There seems to be quite a bit of extra padding. This was exactly what I was looking for. Even if the back isn't raised this much, a slight depression close to the end would make life easier.

What kind of foam do you have in this?

How difficult/easy is it to remove it? Thinking on the lines of using it only for long distance purposes. I have had too many bad experiences with people using keys/blades to see what you have inside the seat.

Thanks a lot for your reply!