[khanak]

Just added 6 new models to my collection



1. Jaguar XK140
2. Mercedes Benz SLR
3. Porsche Carrera GT
4. Mercedes Benz 500k
5. Audi R8
6. BMW M5



I got the Jaguar from Toronto and the rest at Shoppers Stop in Andheri.

Like the rest of my collection these are all 1:18s.

Im facing a big problem with space. All my models are sitting in what used to be a bookcase and you cant really see them that well. Shoppers Stop had a really nice display case given to them by Maisto. I looked through the Yellow Pages to find somethign similar and came across an ad that had a pretty decent looking display case that is made of aluminium. I'll be calling them in a while once their shop opens.



How do you'll display your models? Ideally Id like to have them out in the open on shelves but with the dust and fear of kids coming over and thinkign they are toys, Id rather have somethign that I can lock.

[neiltopaz]

Originally Posted by diecastfreak

Neil can you let us know about the custom duties and hassles when you order from Kevin, what method you use, etc? It would be really helpful.

Customs duties are charged on the CIF value i.e. cost of the model + freight upto Bangalore airport. Customs duties are calculated as follows:

CIF x prevailing exchange rate = assessable value in Rupees
Add:
1% Landing Charges
7.5% Basic Import Duty
14% CENVAT
2% Education Cess on CENVAT
1% Sec. & Higher Education Cess on CENVAT
2% Customs Education Cess (CEC)*
1% Sec. & Higher Education Cess*
4% Additional Duty (Imports)

* Calculated on the sum of 7.5% Basic Import Duty + 14% CENVAT + 2% Educ. Cess on CENVAT + 1% Sec. & Higher Educ. Cess on CENVAT

Add to this your clearing charges at the airport and transportation upto your location. For small consignments it would be worthwhile to have a reputed courier deliver it to you directly. For consignments weighing over 100 kgs. using your own forwarder to bring the models through air consolidation is economical.

[neiltopaz]

Originally Posted by diecastfreak

Neil can you let us know about the custom duties and hassles when you order from Kevin, what method you use, etc? It would be really helpful.

Sorry forgot to mention earlier - you need to have an import licence issued by the office of the Director General of Foreign Trade, to be eligible to import any items into the country on your own.

Originally Posted by khanak

Just added 6 new models to my collection

Attachment 17141

1. Jaguar XK140
2. Mercedes Benz SLR
3. Porsche Carrera GT
4. Mercedes Benz 500k
5. Audi R8
6. BMW M5



I got the Jaguar from Toronto and the rest at Shoppers Stop in Andheri.

Like the rest of my collection these are all 1:18s.

Im facing a big problem with space. All my models are sitting in what used to be a bookcase and you cant really see them that well. Shoppers Stop had a really nice display case given to them by Maisto. I looked through the Yellow Pages to find somethign similar and came across an ad that had a pretty decent looking display case that is made of aluminium. I'll be calling them in a while once their shop opens.

Attachment 17142

How do you'll display your models? Ideally Id like to have them out in the open on shelves but with the dust and fear of kids coming over and thinkign they are toys, Id rather have somethign that I can lock.

I would suggest you display your models in as air-tight a case as possible. Be careful of 'diecast rot' - really the fault of the manufacturers who either buy sub-standard diecast material or do not dry out or treat the diecast model sufficiently with primer before putting on the final layer of paint. If such models are exposed to the slightest moisture (which happens when the temperature drops by more than 3 degrees in a single day), the paintwork starts getting a rough look, which goes on to getting blistered. What is more, such models tend to just come apart at the seams - try to open a door or trunk/hood and the part may just come away in your hand.

Put in some silica gel in a separate container with each model to absorb the moisture that will invariably form in your display area. Silica gel is hygroscopic in nature and generally blue when dry. Once it has absorbed the moisture, it turns white. What you got to do then is expose it to heat (not an open flame) and it will turn blue again. Replace it in your display.

If you have a showcase, tape the open spaces with clear cello-tape to keep as much moisture away. Transparent cello-tape does not hinder visibility.

[scorp 1]

Where in Delhi can I get the Autoart 1:18 scale models?

[swapszone]

i have a similar question...

we had MODEL ART in the Inorbit Mall in Mumbai
now since its closed down, does any one know where they have moved to or is there any such shop anywhere else

[speedfreak01]

Hey S2..have you painted the rims on your mustang and f50 using a permanent marker?

The best place to buy Aa's in delhi is modelart in select city walk mall..Their collection is pretty impressive.

[scorp 1]

Originally Posted by speedfreak01

The best place to buy Aa's in delhi is modelart in select city walk mall..Their collection is pretty impressive.

And I never knew about it ! Thanks a ton dude !

[khanak]

Originally Posted by neiltopaz

I would suggest you display your models in as air-tight a case as possible. Be careful of 'diecast rot' - really the fault of the manufacturers who either buy sub-standard diecast material or do not dry out or treat the diecast model sufficiently with primer before putting on the final layer of paint. If such models are exposed to the slightest moisture (which happens when the temperature drops by more than 3 degrees in a single day), the paintwork starts getting a rough look, which goes on to getting blistered. What is more, such models tend to just come apart at the seams - try to open a door or trunk/hood and the part may just come away in your hand.

Put in some silica gel in a separate container with each model to absorb the moisture that will invariably form in your display area. Silica gel is hygroscopic in nature and generally blue when dry. Once it has absorbed the moisture, it turns white. What you got to do then is expose it to heat (not an open flame) and it will turn blue again. Replace it in your display.

If you have a showcase, tape the open spaces with clear cello-tape to keep as much moisture away. Transparent cello-tape does not hinder visibility.

Thanks for the tips, Iv already used MIN cream on my models which I believe should also give some moisture protection. Any idea where I can get silica gel?

I called a couple of places and they said that a case 6 feet in feight and 18 inches in breadth and 18 inches in width would be around 9k. Im feelign a little kanjoos at the moment and so I guess ill just stick them in my cupboard for now.

[neiltopaz]

Originally Posted by khanak

Thanks for the tips, Iv already used MIN cream on my models which I believe should also give some moisture protection. Any idea where I can get silica gel?

I called a couple of places and they said that a case 6 feet in feight and 18 inches in breadth and 18 inches in width would be around 9k. Im feelign a little kanjoos at the moment and so I guess ill just stick them in my cupboard for now.

As you know I'm in Mysore, Karnataka, South India. I had to hunt around a lot and finally got silica gel in a small lane in the city area. You should get this material (generally by the kilogram) in electrical stores/hardware stores. Buying it by the kilogram will be cheaper than buying pre-packed material.

[diecastfreak]

Originally Posted by neiltopaz

Customs duties are charged on the CIF value i.e. cost of the model + freight upto Bangalore airport. Customs duties are calculated as follows:

CIF x prevailing exchange rate = assessable value in Rupees
Add:
1% Landing Charges
7.5% Basic Import Duty
14% CENVAT
2% Education Cess on CENVAT
1% Sec. & Higher Education Cess on CENVAT
2% Customs Education Cess (CEC)*
1% Sec. & Higher Education Cess*
4% Additional Duty (Imports)

* Calculated on the sum of 7.5% Basic Import Duty + 14% CENVAT + 2% Educ. Cess on CENVAT + 1% Sec. & Higher Educ. Cess on CENVAT

Add to this your clearing charges at the airport and transportation upto your location. For small consignments it would be worthwhile to have a reputed courier deliver it to you directly. For consignments weighing over 100 kgs. using your own forwarder to bring the models through air consolidation is economical.

Thanks for the info Neil. Much appreciated. For a few models its better to choose a courier, but it almosts doubles the prices per model upto the door!

[S2!!!]

Originally Posted by speedfreak01

Hey S2..have you painted the rims on your mustang and f50 using a permanent marker?

The best place to buy Aa's in delhi is modelart in select city walk mall..Their collection is pretty impressive.

yup. that's right!. the chrome rims looked too loud on the GT500 and i didn't like how it looked so just used a permanent marker to modify it a bit. if you actually watch closer i have smoked the lights also of the GT500 as well as the rear lamps of the EVO. i think it looks pretty cool that way.

[F50]

Alright after quite sometime I have added something to my small collection of 1:18s.
Its a Black Hummer H1 (4-door wagon)

[girishpv]

Nice collections, I should tell my son to start preserve his toys (die cast) for tomorrow, well done....

[khanak]

[amit V8]

my 2005 HUMMER H2 SUT.