Team-BHP - All T-BHP Scorpio Owners with Pics of their SUV

guys, help me with this.

i am planning for a carputer in my scorpio. has this been done in a Scorpio ? if yes, can I have some contacts, info, tips, expert comments on this please.

my only research till now has been on team bhp forums and the iride.in website.

though, I cudn't find anything for a Scorpio,

n e help is appreciated.

Rishin,

welcome aboard. If you utilize the search field on the TBHP page, you shall get all your auto queries answered.
Can we request you to post your scorp's pics to add to our collection on this thread??

Quote:

Originally Posted by m_upreti (Post 1142386)

Hi getsurya, pls find below the mail I sent to Mahindra on 20-01-09, I got an SMS giving the Complaint number an hour later & the call from the dealer came yesterday. A TAT of 2 days to resolve is appreciable. clap:

Alternatively call them on 1800226006 / 09935066006:

Regards,

thanks a lot buddy.

Quote:

Originally Posted by rishin.kalra (Post 1142753)

someone on T-BHP has done it in his safari, cant recall who is it. as far as i remember, nobody in T-BHP has installed a carputer in a scorpio. post this query in the safari thread, you will get the response. installation will be almost similar.

will certainly post some pics this weekend.

as for the carputer, I was looking for specific information on Scorpio installation if any.

found a user, bad_bouy who was doing this as DIY, but found no updates on his thread post September 2008.

Raj, have checked out the Safari installation. Thanks

I have to make a sharp U turn to enter my house gate. It's a very close call and I have managed it successfully for two & a half years. The other night, there was just that minor error and this is what happened! I heard a 'crrrrunchhh' as it got sheared off! :Frustrati

All T-BHP Scorpio Owners with Pics of their SUV-img_1188.jpg

The dealer does not have the 'new style' flat hub covers in stock! They had the old style huge protuberances, but I see no point of having such enormous cups fitted!

Now here is the issue that I want some opinions on: The front caps on my car HAVE to be the large protuberances, being the 4WD variant. Should I opt for the 'flat' ones for the rear wheels or stay with the large ones?

Quote:

Originally Posted by raj_5004 (Post 1143202)

i would advise you the protuding ones, that is, stay with the large ones... flat ones at the rear and different protruding ones at the front will obviously be a mismatch and will look ugly.

Oh Raj, you break my heart! They'll break again! The Scorpio has the same track front and back; so there is always the risk of scraping some portion of the after-end during tight turns.
Kidding, Raj! Thanks for your opinion, though it is not known yet whether I'll abide by it! :)

Quite frankly, I'd expected to break at least two of them during the Ladakh tour!

Quote:

Originally Posted by rishin.kalra (Post 1143071)

found a user, badboy who was doing this as DIY, but found no updates on his thread post September 2008.

Hehehe, thats me .. i wasnt able to go ahead with the scorputer due to some serious idling issues in my scorp. But now, that the pump issue has been sorted out and the vechicle has returned to normal, i ll update the scorputer thread soon. Some minor wiring issues pending.

guys i was just checking a few pics of the luxury import cars in that i saw a hummer with a bush(or bull) guard.. i may say it looks exceptional on the hummer.. i was wondering can something similar be implemented on the scorpio.. sort of different from the traditional aftermarket ready made bars available..
photoshop pro's please design a hummer style bush guard :)
and i was wondering there is a welding shop near my house can Bush guards be made for cars there or you need some different material? most of the metal work in my house is done by them and dey do an exceptional job.
my uncle's got a scorpio maybe ill convince him :) (or if im lucky to buy one for my self ill get it for myself)

hi vinay, looking at your lineup of cars, especially the camry, i feel it would be very easy to buy a scorpio and customize a guard for it, atleast financially!

okay, can you give a picture of the guard or hummer you are talking about, it will be easier for the 'photoshop pros'.

my dad's the one who decides :) but im actually the one who convinces him to do so ^ ^
also financial crunches going around everywhere :) ill have to wait a while till i get a new car prob will sell my palio for doing so.
few pics of hummers with Bush guards..
Personally i dont like the ones which come readymade..
is it possible for a wielding/metal shop for making such stuff..

@mods i know its a post your scorpio pic thread i just want to show a few pics of of bush guards

Quote:

Originally Posted by vinaydas (Post 1143589)

few pics of hummers with Bush guards..
Personally i dont like the ones which come readymade..
is it possible for a wielding/metal shop for making such stuff..

@mods i know its a post your scorpio pic thread i just want to show a few pics of of bush guards

yes, these guards seem to be very easy to make, straight lines and simple design, would look elegant i feel.

Quote:

Originally Posted by vinaydas (Post 1145538)

check this out i just found it now ...
Mahindra to launch new Scorpio | Vicky blog | Indian Automobile blog

hope thay dont mess up the look of the scorpio like they did with the xylo.

Quote:

Originally Posted by raj_5004 (Post 1145640)

hope thay dont mess up the look of the scorpio like they did with the xylo.

They will! My personal belief is that the current Scorpio happened as a fluke, not by design or intent! :D

Quote:

Originally Posted by vinaydas (Post 1143468)

guys i was just checking a few pics of the luxury import cars in that i saw a hummer with a bush(or bull) guard.. i may say it looks exceptional on the hummer.. i was wondering can something similar be implemented on the scorpio.. sort of different from the traditional aftermarket ready made bars available..
photoshop pro's please design a hummer style bush guard
and i was wondering there is a welding shop near my house can Bush guards be made for cars there or you need some different material? most of the metal work in my house is done by them and dey do an exceptional job.
my uncle's got a scorpio maybe ill convince him (or if im lucky to buy one for my self ill get it for myself)

Not exactly a Hummer bullbar, but it is custom made, and pretty unique. I've been thinking of painting it (some nicks on it), but I think it looks the part as is :D