Team-BHP (https://www.team-bhp.com/forum/)

-   Technical Stuff (https://www.team-bhp.com/forum/technical-stuff/)

-   -   Maruti Genuine Parts (MGP) Catalog: Post your queries here (model list on Pg 1) (https://www.team-bhp.com/forum/technical-stuff/184933-maruti-genuine-parts-mgp-catalog-post-your-queries-here-model-list-pg-1-a-24.html)

Need help regarding the following:

Car : Maruti 800
Model:AC MPFI 4 speed

Part no. required for;

1. Injector "O" rings
2. Rubber/plastic collar for engine air filter duct/pipe, throttle body end

Part No: 09320M09022
Name: CUSHION INJECTOR
Price: Rs. 20

What's this?? Can you kindly illustrate it using an image??

Regards,
Shashi

Hey thanks for part no. of O rings.

Regarding the collar, it's the rubber gasket ring which acts as seal between the aluminium throttle body and air filter pipe connected to it.
This is fixed over the throttle body air dam opening onto which the plastic air filter pipe is fixed.

Couldn't find any such part. All I could find is a clamp.

Hi :)

My uncle owns a 5-S Maruti 800, the same model which you have. He needs the part details and price of the following:

1. Head Assembly
2. Catalytic converter
3. Oxygen Sensor
4. Alternator

Thanks.

Okay, no issues, seems like its not The "part" as per Maruti, must be A part of some kit/packing.

BTW a big thanks to you for the part no., got the O rings today from MGP store.

Welcome sir.

:OT Those O rings have an interesting story behind them. The part number which is written in M800s book is SGP and costs 300 per cushion. So for 3 cushions alone, you'll need to spend close to 900 rupees.

Last year I was in a similar dilemma, so did some research and came up with this part number. Spent many sleepless nights over the tiny cushions. It's probably of Alto, but does the job perfectly. lol:

Regards,
Shashi

I just read the thread in the DIY Section on the Variable Intermittent wiper mod. I am thinking of doing the same on my wife's Celerio. While at it I also wanted to explore the possibility of fitting a rear wash/wipe. Can I have a list of parts I would require for that?
Another mod I would like to do is the remote tailgate opener. I had done this mod on my Alto using the parts (Dual lever, Cable and Latch) from the Alto Vxi. Any idea which model parts are compatible with the Celerio? Mine is a Celerio Vxi AMT.

Sorry, no questions about modsplease:.

Having said that, you can make a list of the spares from this link: http://oriparts.com/7/54/1497/472257

You can also get an idea about the spares needed and process followed for adding rear wiper: http://www.team-bhp.com/forum/diy-do...aruti-zen.html

Regards,
Shashi

Can you help me with the part number of the MGP Tyre Valves?

Bought it a few weeks ago. stupid:

Regards,
Shashi

Hi Anant. Somehow skipped your post, apologies for the same.

1.
Part No: 11110M84401
Name: HEAD COMP CYLINDER (MPFI/F8D)
Price: Rs. 21,762.50

2.
Part No: 14250M844M1
Name: CASE COMPCATALYST(MPFI/F8D)
Price: Rs. 10850.5

3.
Part No: 18213-63E60
Name: SENSOR OXYGEN
Price: Rs.9396

4.
Part No: 31400M50A00
Name: GENERATOR ASSY(F8D & F8B WITH AC)
Price: Rs. 9317

Regards,
Shashi

Hello shashi.
I recently replaced all four struts of my 2004 Baleno vxi at a nearby FNG. However he wasn't able to procure the bushes for replacement. I wanted to know if they are available. I am looking to replace all the rubber bushes which are part of the suspension

Hi Sashi,
I own a '98 M 800 AC. 4 speed Manual transmission.
Looking for converting it into Auto box.
Pls share the part no of old Auto Box complete kit.

Also, can I use the Zen/ Esteem Auto box for this Engine. Need to check the compatibility.

Thanks in advance.

Regards,
Maverick79

I won't recommend as most of the crucial parts of 800 AT were SGP/Made in Japan, and discontinued long time back. Some small spares are available but they too are hard to get. You can try sourcing parts from a used car.

Regarding Esteem and Zen's Autobox, I don't think they'd be compatible with the F8B.

Regards,
Shashi