[(Alok)]

Dear Shashi
Below are the two oil filter parts no.
1. 16510 M 68K00
2. 16510 M 68K20

My car is Baleno Aug. 2020 model. Maruti genuine parts website says that the both are compatible with the said model. What is the difference between these two filters?
Is it safe to use ‘16510 M 68K20’ for K12M engine?

[revvharder]

Hi Shashi sir, i had been looking at a part in my Wagonr CNG which was not present with previous generation of wagonr. I tried looking up and with the help of boodmo i was able to narrow down the part no. to 15830M69R90 but i am unable to get any information on the part, it looks like a CNG filter which aftermarket CNG kits use but it is not in mentioned in the CNG service manual. So it would be really helpful if you could shed some light what this part is and what function it serves ?

[raj4466]

Originally Posted by Leoshashi

LXI: BLACK: 71740M50UA0-DB8, Rs. 2270

VXi and Beyond Chrome: 71740m50UB0-DB8, Rs. 5455

Thank You.

[1.2GT3GT]

Originally Posted by Leoshashi

Lower Struts:

OE Part numbers: 41802-60GA0 and 41801-60GA0, costs Rs. 8510 each
Alternative: TRW Left and TRW Right

TRW is a reputed aftermarket brand and I'll highly recommend it.

Lower Arm: 45201-63G01 and 45202-63G01, costs Rs. 11,300 each.

@Leoshashi, thank you for the part numbers for the Baleno 1.6.

Is there an MGP alternative to the SGP part for the front control arms? Do reputed brands like TRW (or others) also offer those controls arms?

Could you please provide the part numbers from TRW for the front struts as well for the Baleno 1.6?

[1.2GT3GT]

@Leoshashi, would it be possible for you to share the image of the parts breakdown diagram and related parts list of the front and rear suspension categories from your catalog for the 2001 Baleno 1.6 sedan? Thank you.

[1.2GT3GT]

Originally Posted by 1.2GT3GT

Is there an MGP alternative to the SGP part for the front control arms? Do reputed brands like TRW (or others) also offer those controls arms?

Both the authorized Maruti service centre and the authorized Maruti genuine parts dealer near me told me that parts are no longer available through their channel for the Baleno 1.6.

Meanwhile, managed to find an auto parts manufacturer from Gujarat who listed their offering of tie rod end set, steering ball joint, stabilizer link set and the front lower control arms for the Baleno 1.6 referring the original Maruti part numbers.

Please refer page 5 in this PDF catalog:
http://omxsuspension.com/wp-content/...alogue-PDF.pdf

[Sanidhya mukund]

Hello,

Can you please tell me the part number for that black plastic panel that the new XL6 facelift has on the boot lid? Want to order one for my pre-facelift Ertiga. Also, will I have to buy the chrome trim separately or does it come included with the part?

Thanks!

[BlueKatana]

Originally Posted by Sanidhya mukund

Can you please tell me the part number for that black plastic panel that the new XL6 facelift has on the boot lid?

Here you go

Part Name: GARNISH, BACK DOOR LICENSE
Part No: 839B0M50U10-KDJ
MRP: ₹4,565

will I have to buy the chrome trim separately or does it come included with the part?

The chrome trim comes pre-installed with the panel.

[1.2GT3GT]

Originally Posted by 1.2GT3GT

Could you please provide the part numbers from TRW for the front struts as well for the Baleno 1.6?

Though this thread is about Maruti Genuine Parts, since they are unavailable for shock absorbers for the Baleno 1.6, I’m adding information here about the TRW alternative.

Managed to pick up front and rear shock absorbers from TRW for the Baleno 1.6.

Here are the part numbers that make up the stack of shock absorbers in the attached image:
JGM9257SL Rear Left
JGM9257SR Rear Right
JGM9304SL Front Left
JGM9304SR Front Right

[Rhapsodicjock]

Hello Leoshashi,
-Maruti Gypsy King
-MPFI 2018 manuf.
-parts 99500M 80303-74E

Service Manual
99510M82C00-74E
Supplementary Service Manual
Wiring Diagram Manual
99512M82C51-74E

99510M82C01-74E
Supplementary Service Manual
99500M82C51-74E
Supplementary Service Manual
99512M82C00-74E

These service manuals for MG413w 16 valve soch. I need to know where I can procure them.

[ThatMAV1217]

Hello Leoshashi,

I have a 2004 Maruti WagonR Vxi and I would like to add a rear wiper and washer to it using the parts that came with the Type I WagonR (the MAV one).

Could you please list out the part numbers of the parts needed for the retrofit?

Thanks in Advance.

[sumeethaldankar]

Part nos for 2019 petrol Swift for shock absorbers and top mounts.

41601M55R00
41602M55R00
41710M55R00 (mount)

Just had them changed at A.S.S due to a leaking strut.

[adilj]

I have a 2017 Maruti Ciaz, want the part number for the rubber beading for all doors and the chrome strips on the outside near the windows.

Can you please help me with the same

[smrutisourav]

Hi folks,

I have procured a harman infotainment system. I would be installing it in the 1st gen celerio. Right now I'm listing down the parts that I need to procure to perform the same.

Currently I'm unable to find the cable that connects the mic from the roof to the infotainment system.

I have short listed 2nd gen Celerio's mic (https://boodmo.com/catalog/part-mic_...free-47915807/), so need the cable to connect it to the harman system.

[Sanidhya mukund]

Hello,

The Carburetor on my 1995 Maruti Esteem just isn’t working right. The car drives well for a few days after the carb is cleaned and tuned, but it goes back to being choppy in a few days. The mechanic says that now it is finally time to change it entirely. Could you please tell me the part number for the Esteem Carburettor and whether it is still possible to get a new OEM one? Also, does anyone know if a Maruti 800 Carburettor fits the old Esteem? I remember reading somewhere that the NE118, Gypsy, Zen, Esteem and M800 carburettors are all interchangeable, but want to be sure.

I am getting a used carburettor from a 1996 M800 for a reasonable price, was wondering if it’s worth going for it?