![]() |
Originally Posted by crazy_driver
(Post 2049943)
I have done about 30K in my getz crdi in the first year :D. Was using mineral oil till now (changed at every 5K). Now planning to switch to fully synthentic oil. Problem is the grade. i checked with Mobil1 distributor and they have grades of 5W50 and 0W40. My service people have been using 10W30 mineral oil till now. 10W30 is specified in my getz manual for the array of temperatures mentioned. I want to know whether any of the mobil1 grades can be used on my engine? I have gone through many of the threads, also went to car bible for a detailed study but couldnt decide stupid:. So please help. |
Originally Posted by ph03n!x
(Post 2051047)
Hold the thought on 5W50 / 0W40 /10W30 - did you check the API Service Category of the synthetic oil? The Getz CRDi needs API CH or higher category engine oil, which should of course meet the SAE viscosity rating. When looking for synthetics for my Getz CRDi, I found that not many synthetics are CH rated - most are CF or CG at best. And that's why I settled with Mobile Delvac MX, a mineral oil, rated API CI+. |
Originally Posted by ph03n!x
(Post 2051047)
And that's why I settled with Mobile Delvac MX, a mineral oil, rated API CI+. |
Originally Posted by Rahulk76
(Post 2045875)
Has anyone tried Petronas Urania ? Every wholeseller shop is brandishing this oil :D http://www.mymesra.com.my/microsite/...premo_CI_4.pdf Seems promising.. |
Originally Posted by crazy_driver
(Post 2052624)
Ohh i didnt know that. Thanks for the help. May be I should start thinking about the mineral oil again. By the way, I am also trying to get a K & N filter. I checked their site and came up with the part number - (33-2094) 33-2094 - K&N Replacement Filters, Replacement Air Filter. Can anyone help me on this whether this is the intended part or if this is available in bangalore. |
Originally Posted by crazy_driver
(Post 2052886)
@ph03n!x - Which is the grade that you used for Mobile Delvac MX. is it 15W40? I only found this grade on net. Is this okay for the getz crdi? |
Originally Posted by crazy_driver
(Post 2054283)
Also the air filter cannot be different for diesel and petrol right? |
Originally Posted by ph03n!x
(Post 2054381)
It is indeed the part number you mentioned, though not sure if there is any difference between Petrol and Diesel Getz's filters. |
Originally Posted by condor
(Post 2054405)
MRP is 240 a liter. Minimum I have heard is about 205 a litre. Note, it is Mobil Delvac MX. Mobil1 is a synth oil. |
Originally Posted by condor
(Post 2054405)
MRP is 240 a liter. Minimum I have heard is about 205 a litre. Note, it is Mobil Delvac MX. Mobil1 is a synth oil. |
Originally Posted by rakesh_r
(Post 2056155)
My swift vdi will go for first service within two weeks.Can i use mobil delvac mx right from first service? |
Originally Posted by condor
(Post 2054405)
MRP is 240 a liter. Minimum I have heard is about 205 a litre. Note, it is Mobil Delvac MX. Mobil1 is a synth oil. |
All times are GMT +5.5. The time now is 11:17. |