Modifying my Alto VXI 1.1 Alloy Rims and Tires

rjstyles69 · 3rd July 2007, 14:51

Quote:

I am looking for performance improvement too and do you know any specific guys who do a good job here in bangalore.

FFE and a good air filter is the way to go.

For FFE : PM our own bhpi'ian viper for details : Viper Performance India

Air filter there are quite a few one's available and you can pick it up from dealers in bangy.
Check here : Methods Car Parts and Car Accessories Online Shop and Distributors in Bangalore India, K&N Performance Filters, Sparco Motorsport Accessories

Akshay1234 · 3rd July 2007, 18:40

Quote:

Originally Posted by rjstyles69

FFE and a good air filter is the way to go.

For FFE : PM our own bhpi'ian viper for details : Viper Performance India

i 2nd that.. did a great job on my getz.

VJ_MAVRICK · 3rd July 2007, 18:46

Thanks akshay and styles and thats the reason this forum rocks with inputs and feedback on the hour every hour by you guys.I will soon enhance the same after checking out the stuff.
Cheers Vijay

desigNation · 3rd July 2007, 22:32

vj-mavrick-i'm still with you, more in to the aesthetic department, so keeping quiet about the technical part cause my knowledge is minimal regarding that.[but like i have said before in another thread i loooooove power]

VJ_MAVRICK · 3rd July 2007, 22:46

Thanks "dessigNation" and for the technical stuff there are ample brains here to help out people like me and if i can say you

as well..... As suggested by inhouse brains , "styles" and "akshay" I contacted "viper" and mostly will get FFE done by him once am ready with the bucks because i spent already around 27K for the alloys and tires.

CrAzY dRiVeR · 4th July 2007, 08:22

Quote:

Originally Posted by nischint

http://www.team-bhp.com/forum/indian...aust-sale.html check this out !!!!!!!!

You could PM Xinome for the Viper exhuast up on sale. The k&n However, was sold during last tbhp meet.

Sankar · 4th July 2007, 09:21

Quote:

Originally Posted by CrAzY dRiVeR

You could PM Xinome for the Viper exhuast up on sale. The k&n However, was sold during last tbhp meet.

Dont bother Xinome's exhaust is for the 3 cyl Alto it will not fit the 1.1.

VJ_MAVRICK · 4th July 2007, 10:24

Thanks Nischint and Crazy Driver for the pointer....the K&N filter is already gone and yea Sankar is right on as mine is an alto vxi 1.1 with 4 cylinds and i am planning to get it from Jignesh itself as i had a chat with him last night

rjstyles69 · 4th July 2007, 13:28

uuggghh another one bites the dust

. Happy modifying mate.

Also I would say upgrade only when money and time permits. There is no hurry viper would only be more than happy to help you out.

Knight Rider · 4th July 2007, 13:32

Looks like you are on the same track that I went on, I also upgraded the wheels, , then K&n then headers, then suspension, spark pugs and the list goes on.

However take time between your mod's, otherwise at the end of the day you will not be able to figure out what has worked and what has not..

Also you done neccasarily need a K&n, You will find a lot of other filters giving the same power (which is minimal by the way) and cheaper too.

Sorry I could not help you with your query about wheels, i was too busy with work.
I can tell you this because I have k&n xtreme filter in my car

VJ_MAVRICK · 4th July 2007, 13:50

No problems "Knighty" got enough tips and suggestions from styles,abhi,desigNation,akshay and all as there is always someone or another to guide novices like me.

Yea! I would plan to space the mods as even the bucks count

and yes i heard a lot about K&N xtreme and will be buying that alone and my next upgrade is viper's FFE and so lets see how things go on.
Cheers Mavrick

rjstyles69 · 4th July 2007, 13:54

Quote:

Looks like you are on the same track that I went on, I also upgraded the wheels, , then K&n then headers, then suspension, spark pugs and the list goes on.

I can tell you this because I have k&n xtreme filter in my car

And when did all this happen

.

Knight Rider · 5th July 2007, 15:16

Quote:

Originally Posted by rjstyles69

And when did all this happen

.

Err...... All this happened a while ago... I havent posted anything regarding the mods apart from asking questions, Check my gallerry

Also The ffe will work wonders, You would not wanna get out of your car... Enjoy and drive safe

VJ_MAVRICK · 5th July 2007, 15:39

Hey Knighty...hope ffe does not change the overall dynamics and affect the engine right? i dont want or for that matter anyone .....the negine to be affected...your thoughts and inputs on this..

rjstyles69 · 5th July 2007, 15:47

Quote:

Originally Posted by VJ_MAVRICK

hope ffe does not change the overall dynamics and affect the engine right? i dont want or for that matter anyone .....the negine to be affected...your thoughts and inputs on this..

I thought you drove down some place a few mins/hrs back to get these queries answered ? Dint you

?

3rd July 2007, 18:46	#33
VJ_MAVRICK Senior - BHPian Join Date: Jun 2007 Location: Sydney Posts: 1,239 Thanked: 34 Times View My Garage	Thanks akshay and styles and thats the reason this forum rocks with inputs and feedback on the hour every hour by you guys.I will soon enhance the same after checking out the stuff. Cheers Vijay
	() Thanks

3rd July 2007, 22:32	#34
desigNation BHPian Join Date: Dec 2006 Location: calicut Posts: 661 Thanked: 51 Times View My Garage	vj-mavrick-i'm still with you, more in to the aesthetic department, so keeping quiet about the technical part cause my knowledge is minimal regarding that.[but like i have said before in another thread i loooooove power]
	() Thanks

3rd July 2007, 22:46	#35
VJ_MAVRICK Senior - BHPian Join Date: Jun 2007 Location: Sydney Posts: 1,239 Thanked: 34 Times View My Garage	Thanks "dessigNation" and for the technical stuff there are ample brains here to help out people like me and if i can say you as well..... As suggested by inhouse brains , "styles" and "akshay" I contacted "viper" and mostly will get FFE done by him once am ready with the bucks because i spent already around 27K for the alloys and tires.
	() Thanks

4th July 2007, 10:24	#38
VJ_MAVRICK Senior - BHPian Join Date: Jun 2007 Location: Sydney Posts: 1,239 Thanked: 34 Times View My Garage	Thanks Nischint and Crazy Driver for the pointer....the K&N filter is already gone and yea Sankar is right on as mine is an alto vxi 1.1 with 4 cylinds and i am planning to get it from Jignesh itself as i had a chat with him last night
	() Thanks

4th July 2007, 13:28	#39
rjstyles69 Senior - BHPian Join Date: Sep 2006 Location: Bengalooru.. Posts: 4,343 Thanked: 842 Times View My Garage	uuggghh another one bites the dust . Happy modifying mate. Also I would say upgrade only when money and time permits. There is no hurry viper would only be more than happy to help you out.
	() Thanks

4th July 2007, 13:32	#40
Knight Rider BHPian Join Date: Oct 2005 Location: Bangalore Posts: 282 Thanked: 28 Times	Looks like you are on the same track that I went on, I also upgraded the wheels, , then K&n then headers, then suspension, spark pugs and the list goes on. However take time between your mod's, otherwise at the end of the day you will not be able to figure out what has worked and what has not.. Also you done neccasarily need a K&n, You will find a lot of other filters giving the same power (which is minimal by the way) and cheaper too. Sorry I could not help you with your query about wheels, i was too busy with work. I can tell you this because I have k&n xtreme filter in my car
	() Thanks

4th July 2007, 13:50	#41
VJ_MAVRICK Senior - BHPian Join Date: Jun 2007 Location: Sydney Posts: 1,239 Thanked: 34 Times View My Garage	No problems "Knighty" got enough tips and suggestions from styles,abhi,desigNation,akshay and all as there is always someone or another to guide novices like me. Yea! I would plan to space the mods as even the bucks count and yes i heard a lot about K&N xtreme and will be buying that alone and my next upgrade is viper's FFE and so lets see how things go on. Cheers Mavrick
	() Thanks

5th July 2007, 15:39	#44
VJ_MAVRICK Senior - BHPian Join Date: Jun 2007 Location: Sydney Posts: 1,239 Thanked: 34 Times View My Garage	Hey Knighty...hope ffe does not change the overall dynamics and affect the engine right? i dont want or for that matter anyone .....the negine to be affected...your thoughts and inputs on this..
	() Thanks