[ramie2400]

Originally Posted by Amey

What is Pete's Box for ?

How would i know why is the Pete's box for..!! is it some kind of lunch box

[Bass&Trouble]

Originally Posted by ramie2400

By the way i think your car might have become a little heavy and laid back in the initial pick-up,you might be feeling as if you are carrying luggage all the while in the boot

The weight addition hasnt been much. He had this much gear for a very long time now.

Unless you are referring to the times when he ferries around Shrivz.

Originally Posted by Amey

What is Pete's Box for ?

I don't know what it's for and all. But if it's Pete's box, you ought to give it back to him. He must be looking for it. Get one of your own and you can call it Amee's box.

[navin]

Originally Posted by Amey

Peerless 4" Glass fiber neo midrange with rear chamber
Prototype 1000W Mono [/b][/i]

One by one they were going in and coming out with ********MF came out and looking at him, it felt like he had M*****e O****ms.

Attachment 55887

That should read as "Peerless Fabrikkerne India" lest someone mistake it for Tympany.

Oh my gosh....I think I have seen that PCB before. But I suspect it is not 1000W at 4 ohms (atleast not rms). Looks more like 500W @2 / 1000W @1 version of the Hydrogen mono.

Originally Posted by Amey

What is Pete's Box for ?

Originally Posted by ramie2400

How would i know why is the Pete's box for..!!

Originally Posted by Bass&Trouble

But if it's Pete's box, you ought to give it back to him. He must be looking for it. Get one of your own and you can call it Amee's box.

Puurfect! This is exactly what we expect on the ICE section! :-)

Just for that exchange I now rechristen Amey, Ramie and B&T to Larry, Moe and Curly (in that order). LOL.

[PatienceWins]

Originally Posted by Bass&Trouble

The weight addition hasnt been much. He had this much gear for a very long time now.

Unless you are referring to the times when he ferries around Shrivz.

I don't know what it's for and all. But if it's Pete's box, you ought to give it back to him. He must be looking for it. Get one of your own and you can call it Amee's box.

Ajay, you make ICE so easy to understand.

Poor Pete. He must be starving without his lunch box. Please leave Pete boy alone.

[iraghava]

Originally Posted by navin

Just for that exchange I now rechristen Amey, Ramie and B&T to Larry, Moe and Curly (in that order). LOL.

Hahahha!!!! The Three Stooges of the ICE section eh Navin!!

[navin]

Originally Posted by iraghava

Hahahha!!!! The Three Stooges of the ICE section eh Navin!!

play close attention to the order in which I named them.

[Amey]

Oh my gosh....I think I have seen that PCB before. But I suspect it is not 1000W at 4 ohms (atleast not rms). Looks more like 500W @2 / 1000W @1 version of the Hydrogen mono.

@ Navinji,
As far as i know, that mono is rated at 1000W @ 2ohms. At least thats what i have been told.Ajay is in a better position to answer this one.

[low_bass_makker]

Congrats Amey for the install. Would really like to audition it before you upgrade something.

Originally Posted by navin

Oh my gosh....I think I have seen that PCB before. But I suspect it is not 1000W at 4 ohms (atleast not rms). Looks more like 500W @2 / 1000W @1 version of the Hydrogen mono.

It is not GZ Hydrogen this I can confirm.

[kumar_ranjan]

Originally Posted by Amey

@ As far as i know, that mono is rated at 1000W @ 2ohms. At least thats what i have been told.

Is the mono by any chance be the proto of GZTA 1.2000MK². The reason I ask is becuase it matches the description as Amey mentioned. 1 x 650 WRMS @4 Ohm, 1 x 1200 WRMS @2 Ohm and 1 x 1900 WRMS @1 Ohm

[shrivz]

Originally Posted by kumar_ranjan

Is the mono by any chance be the proto of GZTA 1.2000MK². The reason I ask is becuase it matches the description as Amey mentioned. 1 x 650 WRMS @4 Ohm, 1 x 1200 WRMS @2 Ohm and 1 x 1900 WRMS @1 Ohm

Its not a ground zero proto, this I can confirm!

[moralfibre]

Some pics of the amplifier circuitry of a similar amp

[low_bass_makker]

From the pics on can see 85 Degree rated caps by LUXON, Copper bus bar, Solid state small caps, SMD devices, Big capacitor bank on the PS stage, heavy duty power terminals show the amp is quite well built.

[leadf00t]

got a chance to listen to amey's setup last evening.
I must say i was truly stumped by the precise detailing.
the 8in luccent mis bass was sweet and blended nicely with the sub.
Ajay has done a truely amazing job as tuning (like he did for me) as well.

The setup is the best i have ever heard. once again congrats buddy.

[BIKeINSTEIN]

Earlier on TE and even now to an extent on THL, it was computers and Darky aka Amey was known as TE's poorest man.
He would have multiple rigs and would be on the latest config even before we had just kind of got accustomed to planning a rig for ourselves on the lines of his "older" stuff.
Now he has lodged himself here and you can very well understand the 'poor' moniker.
My best wishes and congrats are taken for granted by him.

Sorry for the n00b query but did someone on Tbhp make that amp- looks amazingly neat.

[Bass&Trouble]

Originally Posted by BIKeINSTEIN

Earlier on TE and even now to an extent on THL, it was computers and Darky aka Amey was known as TE's poorest man.
He would have multiple rigs and would be on the latest config even before we had just kind of got accustomed to planning a rig for ourselves on the lines of his "older" stuff.

Ha ha, didn't know that bit about Amey's "Dark" side. But thanks for the clarification. He must be a poor man indeed.