[ScarySkulls]

Hi Gill.
What's the update on the system?

Enjoying it? What are your friend's or near and dear's comments on hearing it?
I hope you don't miss the rear soundstage by now....LOL

[navin]

Originally Posted by low_bass_makker

This in car sub tuning is some serious stuff. For my car I am looking for a good RTA to check the response.

LBM do you know that you will have to RTA each listener's postion and that if you have 4 lisener's you will go mad finding a happy medium between all those positions. Why you dont trust what God gave you (your ears and what's between them).

[navin]

Originally Posted by clipto333

rajat, i would suggest reading the specs before advising. no offence meant an srx2s can pump out 180w rms per channel at 13.8v and 135w at 12v 4ohms. it will be too much for the energy components which has a power handling of 100w rms.

1. those wattages are max wattages.
2. like i have said before these thermal reading are a guide not an absolute. most speakers are more limited by their Xmax than their Watts.

[low_bass_makker]

Originally Posted by navin

LBM do you know that you will have to RTA each listener's postion and that if you have 4 lisener's you will go mad finding a happy medium between all those positions. Why you dont trust what God gave you (your ears and what's between them).

Navin Ji normally I travel alone so I thought to tune with respect to my location, but to see what the final result is I need to check with the RTA how good are my ears and between them.

[navin]

Originally Posted by low_bass_makker

Navin Ji normally I travel alone so I thought to tune with respect to my location, but to see what the final result is I need to check with the RTA how good are my ears and between them.

Does it matter what the RTA says?

[low_bass_makker]

Originally Posted by navin

Does it matter what the RTA says?

It will not matter much but just for some knowledge gain and experience

[anupmathur]

Can someone please tell me what a 100 watts rms rating for 4 ohm speakers means?
Does it mean a 100 watts rms into 4 ohms amplifier is the 'best' match for those speakers?

[clipto333]

Originally Posted by navin

1. those wattages are max wattages.
2. like i have said before these thermal reading are a guide not an absolute. most speakers are more limited by their Xmax than their Watts.

these are the rms wattages. do you mean to say max rms watts?
cant one blow the driver by over powering?

cheers
clip

[Gill]

Rajat system is going on good,though haven't got the chance to listen much,me being in ahmbad,the link u said is tempeting but way out of the budget moreover i am looking for mono amp for sub

Originally Posted by clipto333

these are the rms wattages. do you mean to say max rms watts?
cant one blow the driver by over powering?

cheers
clip

Hi clip,
I am too confused about overpoweing,my sub handles nominal 250 w right!!with max of 400W!!
In sk's install id 10" is getting 400w rms(Max is300),what do u say on this!!

[sanchits]

guys,, i want to know the price of the hertz components installed in this car and also the price of the jbl amp

[low_bass_makker]

Originally Posted by Gill

Hi clip,
I am too confused about overpoweing,my sub handles nominal 250 w right!!with max of 400W!!
In sk's install id 10" is getting 400w rms(Max is300),what do u say on this!!

This is ok. No need to worry it is like the amp will have a little head room and it will not clip. By the way I was using 290 watts rms to the 100 watts rms front stage.

[panky12345]

Originally Posted by anupmathur

Can someone please tell me what a 100 watts rms rating for 4 ohm speakers means?
Does it mean a 100 watts rms into 4 ohms amplifier is the 'best' match for those speakers?

1. It means that the speakers can handle (are capable) of running at 100W nominal (or normal usage) when given this power.

2. Not necessarily, open a new thread...post your exact queries and we'll help you.

[Gill]

Clip, you were planning for HU upgrade(Alpie 9887)what's the update on that.

[ScarySkulls]

Upgrade already decided guys.

I always knew you couldn't keep a Jatt and a grand daddy 15" IDQ too far away for too long. hehehhe........

Quest for new Sub Amp and better HU remains now!

[low_bass_makker]

What happens to the 10 inch baby ?