Tools for a DIYer

Thad E Ginathom · 30th August 2015, 13:36

Super! That sheet is a good idea for stopping the box sliding on the wood too

.

Whilst it is out of harm[ing] way, under a table, now, I have stubbed my toe on my toolbox a few times in the past. Perhaps I should have coated the whole thing in soft rubber!

By the way, re the dewatering pump in my earlier post: I bought a couple of rubber doormats to stand that on, as it vibrates and tends to walk on a hard, flat surface. I think they will reduce noise too.

Jaguar · 1st September 2015, 16:28

Quote:

Originally Posted by Jaguar

settled for a Stanley 19" Plastic Tool Box
More on that and pics when I get the box in hand.

Here are the pics. Still have loads of space to fill up.

a4anurag · 1st September 2015, 23:05

Just got a combination spanner set from PayTm during the 50% cashback offer. Not finding the listing again as another friend needs one.

Same link on Flipkart. Not able to get the link I saw on SnapDeal.

On Flipkart

Crude packing but should last well for the average usage. Insulated Red Grip Double Sided Combination Wrench Set:

Contents:

6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 17mm, 19mm, 22mm

Here are the pictures:

DerAlte · 4th September 2015, 16:01

Quote:

Originally Posted by Jaguar

... settled for a Stanley 19" Plastic Tool Box The store had only a display piece ...

Which store was this? Commercial Street or NR Road?

Jaguar · 4th September 2015, 16:29

Quote:

Originally Posted by DerAlte

Which store was this? Commercial Street or NR Road?

Goodwill Enterprises, SP Road.

Aroy · 4th September 2015, 18:23

You can get it online also

unk9ja · 16th September 2015, 12:58

Bosch is running an exclusive offer on flipkart for its GSB 500 RE home kit of drill gun today at 2999 INR only. This is for one day only. And to top it, a 9 LED glow ring is being given out free.

stanjohn123 · 16th September 2015, 18:58

I'm searching for a 27 mm Hex socket bit with T bar handle.

I'm getting confused when I search online for Hex bits because I'm able to see 27 mm bits which has too many teeth's in it i.e multiple sides. The Hex socket I'm looking for needs to have just 6 sides so that it matches the nut I'm trying to unscrew.

Can anyone help me identify this socket and where can I purchase it online ?

diyguy · 16th September 2015, 19:27

Quote:

Originally Posted by stanjohn123

I'm searching for a 27 mm Hex socket bit with T bar handle.

Found a cheap alternate here. May not be exactly what you want. There are other kits there or on flipkart with the 27mm but it is a set, which you may not need.

adrian · 16th September 2015, 20:14

Quote:

Originally Posted by stanjohn123

I'm searching for a 27 mm Hex socket bit with T bar handle.

I'm getting confused when I search online for Hex bits because I'm able to see 27 mm bits which has too many teeth's in it i.e multiple sides. The Hex socket I'm looking for needs to have just 6 sides so that it matches the nut I'm trying to unscrew.

Can anyone help me identify this socket and where can I purchase it online ?

What type of screw are you working on ?

stanjohn123 · 16th September 2015, 22:10

Quote:

Originally Posted by diyguy

Found a cheap alternate here. May not be exactly what you want. There are other kits there or on flipkart with the 27mm but it is a set, which you may not need.

Thanks diyguy , the socket size is correct but something like the T-bar with this socket is what I'm looking for. I don't mind buying the set if it's around 2,000 Rs.

Something like the below

stanjohn123 · 16th September 2015, 22:21

Quote:

Originally Posted by adrian

What type of screw are you working on ?

I'm working on an External Hexagonal screw.

what I'm trying to unscrew is shown on the image below. It's the oil filter.

Jeroen · 16th September 2015, 22:44

Not a hundred percent sure, but usually a normal socket should fit? Or just invest in an universal filter wrench. http://www.ebay.com/bhp/universal-oil-filter-wrench

SunnyBoi · 16th September 2015, 23:27

Quote:

Originally Posted by stanjohn123

what I'm trying to unscrew is shown on the image below. It's the oil filter.

Attachment 1415523

Cheapest I found was below:

http://www.tolexo.com/taparia-hexago...are-drive.html

You'll need "Socket Set Contains: 8,9,10,11,13,14,17,19,22,24,27,30,32 Accessories 1753,1734,1763,1633" "S-23H X L" part.

My honest advice wold be to just go to the local tool store, buy a 1/2inch L bar, 10inch extension rod and a 27mm socket. Wont cost above 450rs for all 3.

diyguy · 17th September 2015, 00:06

Quote:

Originally Posted by stanjohn123

what I'm trying to unscrew is shown on the image below. It's the oil filter.

I have two of these universal wrenches that can take any shape. My dad had purchased them and I have found it very useful when I don't find the right tool size or shape.

Tools for a DIYer-imageuploadedbyteambhp1442428561.982645.jpg

Tools for a DIYer-imageuploadedbyteambhp1442428570.711216.jpg

The set sunnyboi pointed out is reasonably priced and will meet your needs.

30th August 2015, 13:36	#1111
Thad E Ginathom Distinguished - BHPian Join Date: Jun 2007 Location: Chennai Posts: 11,439 Thanked: 29,988 Times	Re: Tools for a DIYer Super! That sheet is a good idea for stopping the box sliding on the wood too . Whilst it is out of harm[ing] way, under a table, now, I have stubbed my toe on my toolbox a few times in the past. Perhaps I should have coated the whole thing in soft rubber! By the way, re the dewatering pump in my earlier post: I bought a couple of rubber doormats to stand that on, as it vibrates and tends to walk on a hard, flat surface. I think they will reduce noise too.
	(1) Thanks

1st September 2015, 23:05	#1113
a4anurag BANNED Join Date: Oct 2011 Location: Hyderabad Posts: 12,346 Thanked: 21,451 Times	Re: Tools for a DIYer Just got a combination spanner set from PayTm during the 50% cashback offer. Not finding the listing again as another friend needs one. Same link on Flipkart. Not able to get the link I saw on SnapDeal. On Flipkart Crude packing but should last well for the average usage. Insulated Red Grip Double Sided Combination Wrench Set: Contents: 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 17mm, 19mm, 22mm Here are the pictures:
	() Thanks

4th September 2015, 18:23	#1116
Aroy Senior - BHPian Join Date: Aug 2010 Location: Delhi Posts: 2,614 Thanked: 3,008 Times View My Garage	Re: Tools for a DIYer You can get it online also
	() Thanks

16th September 2015, 12:58	#1117
unk9ja Senior - BHPian Join Date: Jan 2012 Location: Bengaluru Posts: 1,127 Thanked: 3,199 Times	Bosch is running an exclusive offer on flipkart for its GSB 500 RE home kit of drill gun today at 2999 INR only. This is for one day only. And to top it, a 9 LED glow ring is being given out free.
	() Thanks

16th September 2015, 18:58	#1118
stanjohn123 Senior - BHPian Join Date: Oct 2008 Location: TN 75 Posts: 1,356 Thanked: 1,854 Times View My Garage	Re: Tools for a DIYer I'm searching for a 27 mm Hex socket bit with T bar handle. I'm getting confused when I search online for Hex bits because I'm able to see 27 mm bits which has too many teeth's in it i.e multiple sides. The Hex socket I'm looking for needs to have just 6 sides so that it matches the nut I'm trying to unscrew. Can anyone help me identify this socket and where can I purchase it online ?
	() Thanks

16th September 2015, 22:44	#1123
Jeroen Distinguished - BHPian Join Date: Oct 2012 Location: Delhi Posts: 8,906 Thanked: 61,523 Times View My Garage	Not a hundred percent sure, but usually a normal socket should fit? Or just invest in an universal filter wrench. http://www.ebay.com/bhp/universal-oil-filter-wrench
	() Thanks