K&N filters

sumeethaldankar · 3rd February 2009, 19:19

Hi guys
i have a some questions regarding K&N filters as am thinking of putting a universal type filter in my Carb 800
1-According to K&N 's site the universal filter is not meant for use in street cars and only for racing vehciles.So is it ok if is t be fitted in a street car.If so how long will
can i excpect the filter to last with proper service.
2-The warranty for a K&N universal filter is only for 1 year while that for a stock replacement one is for a million miles and a liftime one.Why is the difference?
3-I have been quoted around 5400 for a cold air intake with a universal filter by Automech.Is this price correct ?
thanks
looking forward for your answers

greenhorn · 8th February 2009, 10:12

not sure if this link's been posted before
Tuning the LET - Intake

Sreenivas · 12th February 2009, 21:31

Hi Gurus,

Can we install K&N Performance filters for SX4 and is there a readily available kit from K&N for SX4 ?

Thank you

HotChillyPepper · 24th February 2009, 22:50

Is K&N stock replacement filters available for Optra magnum ? I Checked out with Autocar and Evo but they are not able to find one.

KSM-Vtec · 24th February 2009, 23:37

You get them in mumbai for sure.

Quote:

Originally Posted by Sreenivas

Hi Gurus,

Can we install K&N Performance filters for SX4 and is there a readily available kit from K&N for SX4 ?

Thank you

Quote:

Originally Posted by HotChillyPepper

Is K&N stock replacement filters available for Optra magnum ? I Checked out with Autocar and Evo but they are not able to find one.

HotChillyPepper · 25th February 2009, 02:24

Quote:

Originally Posted by KSM-Vtec

You get them in mumbai for sure.

Thanks for the reply KSM. By any chance do you know the exact part no of K&N stock replacement for Optra magnum diesel? If yes then I can place an order for that here in Bangalore.

msvg · 25th February 2009, 14:57

Whats the filter for Santro zipdrive 2001 model? How much does it cost?
I am looking for milage too.

WAGON_R · 25th February 2009, 20:55

depends on what exactly you want. do you want a stock replacement filter or the universal performance oriented filters?
please follow the link below and find the right product for you.

Car Power Grid

sumeethaldankar · 28th February 2009, 21:12

Hi guys
i need suggestions on how to make my Cold Air Intake (K&N univ) actually take in Cold Air.Below are the pics,let me know how to stop it from sucking in hot air from the fan.
After the installation i have noticed a significant improvement in thr torque.Can't hear the intake growl as Automech FFE drowns the noise.

Thanks

sumeethaldankar · 14th March 2009, 18:35

Quote:

Originally Posted by sumeethaldankar

Hi guys
i need suggestions on how to make my Cold Air Intake (K&N univ) actually take in Cold Air.Below are the pics,let me know how to stop it from sucking in hot air from the fan.
After the installation i have noticed a significant improvement in thr torque.Can't hear the intake growl as Automech FFE drowns the noise.

Thanks

Hi guys, changed the position of the filter finally.Had to remove the windshield washer container to accomodate the charcoal can which was the reason begin the earlier fitting.
Now i can truly say it is a proper a CAI.

ghostrider · 16th March 2009, 20:53

Almost immediately after I had my K&N (open filter, not the box) installed in my 1.6L Ikon, I started noticing degradation in performance and fuel economy. This perplexed me for a while, and for the first few days I put it down to the fact that I had just bought my Swift 1.3 MJD and had gotten a little used to the turbo surge it offered.

Eventually, though, I knew there was something amiss. I took the Ikon back to Four Seasons (Bombay) and told them to check it out. When they opened up the hood, they found that the clamp around the pipe they had to retrofit had come lose, and the air being sucked into the filter was escaping from a gap that had opened up. Two minutes and some spanner-work later, problem solved. The performance was back, but I still had some niggling doubts.

Turns out there was also a small hole in my exhaust end-can. I took the car for a service last saturday and told Ford to put her up on a ramp and take a look. Yep, there's a small hole, which is probably why (a) there's been a slight drop in performance (b) the engine note's been a little rough and a little loud, and (c) there's been a slight drop in fuel eco.

I'm getting the car back from Ford on Wednesday. Hopefully the issues will be done by then and I can truly see if the K&N's working like it's supposed to.

Off-topic: Ford claimed that the hole couldn't be spot-welded, and they had to replace segments of the silencer/exhaust. I bet they're lying, but I'm not an expert, so had to accept what they're telling me.

Kevciti · 16th March 2009, 21:12

Anyone know where to get the Recharger Kit here in Chennai. Searched a bit and noone seems to have it. The shop where I picked it up from wants 500 bucks just to clean and reoil it

. Figured I'd rather do it myself. If only I can find some stock of the kit. Am running a replacement filter on my Xing. Any help would be much appreaciated. Thanks.

sumeethaldankar · 22nd March 2009, 17:00

Quote:

Originally Posted by Kevciti

Anyone know where to get the Recharger Kit here in Chennai. Searched a bit and noone seems to have it. The shop where I picked it up from wants 500 bucks just to clean and reoil it

. Figured I'd rather do it myself. If only I can find some stock of the kit. Am running a replacement filter on my Xing. Any help would be much appreaciated. Thanks.

HI,Kevciti
You can use the dealer search to locate a dealer for the oil.

K&N Air Filter & Air Intake Dealer Search - Where to buy K&N Products

UniqueMods · 23rd March 2009, 10:47

The cleaning recharging kit cost about a 1000. works for 6 to 8 times per bottle. You could speak to four seasons in haji ali, mumbai or from bhavni motors in milan.
they could mail it to you.

Turbo Head · 12th July 2009, 22:43

Quote:

Originally Posted by Sreenivas

Hi Gurus,

Can we install K&N Performance filters for SX4 and is there a readily available kit from K&N for SX4 ?

Thank you

No K & N cannot be fitted in SX4, reasons no stock replacement available and you cannot remove the entire assembly for CAI due to air sensors which plague the entire unit.

3rd February 2009, 19:19	#286
sumeethaldankar Senior - BHPian Join Date: May 2007 Location: Mumbai Posts: 4,149 Thanked: 3,676 Times View My Garage	Universal filter Hi guys i have a some questions regarding K&N filters as am thinking of putting a universal type filter in my Carb 800 1-According to K&N 's site the universal filter is not meant for use in street cars and only for racing vehciles.So is it ok if is t be fitted in a street car.If so how long will can i excpect the filter to last with proper service. 2-The warranty for a K&N universal filter is only for 1 year while that for a stock replacement one is for a million miles and a liftime one.Why is the difference? 3-I have been quoted around 5400 for a cold air intake with a universal filter by Automech.Is this price correct ? thanks looking forward for your answers
	() Thanks

8th February 2009, 10:12	#287
greenhorn BANNED Join Date: Apr 2007 Location: KL-01 Posts: 7,878 Thanked: 4,910 Times View My Garage	not sure if this link's been posted before Tuning the LET - Intake
	() Thanks

12th February 2009, 21:31	#288
Sreenivas BHPian Join Date: Aug 2007 Location: Bangalore Posts: 55 Thanked: Once	Hi Gurus, Can we install K&N Performance filters for SX4 and is there a readily available kit from K&N for SX4 ? Thank you
	() Thanks

24th February 2009, 22:50	#289
HotChillyPepper BHPian Join Date: Jan 2006 Location: Bang_a_lore Posts: 665 Thanked: 388 Times View My Garage	Is K&N stock replacement filters available for Optra magnum ? I Checked out with Autocar and Evo but they are not able to find one.
	() Thanks

25th February 2009, 14:57	#292
msvg BHPian Join Date: Dec 2007 Location: USA / Bangalore Posts: 209 Thanked: 24 Times	Whats the filter for Santro zipdrive 2001 model? How much does it cost? I am looking for milage too.
	() Thanks

25th February 2009, 20:55	#293
WAGON_R BHPian Join Date: Feb 2009 Location: MUMBAI Posts: 60 Thanked: 0 Times	depends on what exactly you want. do you want a stock replacement filter or the universal performance oriented filters? please follow the link below and find the right product for you. Car Power Grid
	() Thanks

28th February 2009, 21:12	#294
sumeethaldankar Senior - BHPian Join Date: May 2007 Location: Mumbai Posts: 4,149 Thanked: 3,676 Times View My Garage	Postioning of the CAI Hi guys i need suggestions on how to make my Cold Air Intake (K&N univ) actually take in Cold Air.Below are the pics,let me know how to stop it from sucking in hot air from the fan. After the installation i have noticed a significant improvement in thr torque.Can't hear the intake growl as Automech FFE drowns the noise. Thanks Attached Thumbnails
	() Thanks

16th March 2009, 20:53	#296
ghostrider BHPian Join Date: Jul 2008 Location: Bombay Posts: 745 Thanked: 506 Times View My Garage	Almost immediately after I had my K&N (open filter, not the box) installed in my 1.6L Ikon, I started noticing degradation in performance and fuel economy. This perplexed me for a while, and for the first few days I put it down to the fact that I had just bought my Swift 1.3 MJD and had gotten a little used to the turbo surge it offered. Eventually, though, I knew there was something amiss. I took the Ikon back to Four Seasons (Bombay) and told them to check it out. When they opened up the hood, they found that the clamp around the pipe they had to retrofit had come lose, and the air being sucked into the filter was escaping from a gap that had opened up. Two minutes and some spanner-work later, problem solved. The performance was back, but I still had some niggling doubts. Turns out there was also a small hole in my exhaust end-can. I took the car for a service last saturday and told Ford to put her up on a ramp and take a look. Yep, there's a small hole, which is probably why (a) there's been a slight drop in performance (b) the engine note's been a little rough and a little loud, and (c) there's been a slight drop in fuel eco. I'm getting the car back from Ford on Wednesday. Hopefully the issues will be done by then and I can truly see if the K&N's working like it's supposed to. Off-topic: Ford claimed that the hole couldn't be spot-welded, and they had to replace segments of the silencer/exhaust. I bet they're lying, but I'm not an expert, so had to accept what they're telling me.
	() Thanks

16th March 2009, 21:12	#297
Kevciti BHPian Join Date: Jul 2006 Location: Chennai Posts: 89 Thanked: 18 Times	Anyone know where to get the Recharger Kit here in Chennai. Searched a bit and noone seems to have it. The shop where I picked it up from wants 500 bucks just to clean and reoil it . Figured I'd rather do it myself. If only I can find some stock of the kit. Am running a replacement filter on my Xing. Any help would be much appreaciated. Thanks.
	() Thanks

23rd March 2009, 10:47	#299
UniqueMods BHPian Join Date: Nov 2008 Location: Mumbai Posts: 308 Thanked: 50 Times View My Garage	The cleaning recharging kit cost about a 1000. works for 6 to 8 times per bottle. You could speak to four seasons in haji ali, mumbai or from bhavni motors in milan. they could mail it to you.
	() Thanks