Honda City : Tyre & wheel upgrade thread

nayyar.rao · 11th March 2009, 19:34

Quote:

Originally Posted by Guna

Hi folks
I have decided to upgrade to 195/60 R15 wheel for my ANHC.
I need advice on the tyre selction
My requirements in order of priority:

Safety (one which is least prone to blow-outs, good traction on slippery surface etc. I will come across bad roads occassionally. I won't do very high speeds)
Comfort (as against performance. But I will be happy if I can get both )
Cost (should be within 4500/tyre)
Road noise
Durability

I was advised to go for Bridgestone Turanza by Honda person but the tyre dealer is asking me to take a look at BF Goodrich.

I too am on the hunt for the same and i liked the Michelin Primacy for its features. I was told by the dealer that it is better in performance than the MXV8 and that MXV8s are discontinued. I need expert advice from the tyre gurus.

Please help. I have the following options:
1. Michelin Primacy ( i am assuming Pilot Primacy and not MXV4 as Pilot Primacy is the only one listed)
2. Yokohama A Drive
3. BF Goodrich

iraghava · 12th March 2009, 02:43

Actually the latest launch in the market is the Primacy LC. The MXV8 is being phased out.

Whaateva · 12th March 2009, 12:05

Guys, I have booked the ANHC (white) and am having trouble finding a good set of alloys. I like the Lenso Samurai SC01 DFS but not a dealer in mangalore who has got them.

two doubts here for the gurus:

1. do the samurais suit the ANHC for 15" wheels ( specs given below)
2. anybody know where i could get a set of these.

Website: eCatalogDX
SC01_DFS
passenger

TBC

PCS

Size 1565 4H 8H 10H PCD 100-114.3 ET +25 +38 COLOUR HS,DG,CB,CFR,DFS

Size 1770 4H 8H 10H PCD 100-114.3 ET +25 +35 +42 COLOUR HS DG CB CFR DFS

Size 1875 8H 10H PCD 100-114.3 ET +35 +42 +45 COLOUR HS DG CB CFR DFS

Guna · 12th March 2009, 12:47

Quote:

Originally Posted by Vikster

Hi Guna - so what is the deal with the warranty when it comes to getting alloys fitted from outside the Honda showroom?

Vikram

Warranty will not be affected but they advised me to stick to the stock size (effective dia) and go for only up to 195 (width).
I saw a car which was fitted with 205 and the wheel was sticking outside the car.

nayyar.rao · 12th March 2009, 20:09

Quote:

Originally Posted by iraghava

Actually the latest launch in the market is the Primacy LC. The MXV8 is being phased out.

Finally. I fitted the Primacy LC today on my ANHC 195/60/R15. Got a good buy back deal on my old ones. Phew what a relief.
These tyres look gorgeous and increase the ride height by around 6mm and very silent too.

nayyar.rao · 12th March 2009, 20:18

Quote:

Originally Posted by Whaateva

Guys, I have booked the ANHC (white) and am having trouble finding a good set of alloys. I like the Lenso Samurai SC01 DFS but not a dealer in mangalore who has got them.
---
Size 1875 8H 10H PCD 100-114.3 ET +35 +42 +45 COLOUR HS DG CB CFR DFS

Take a look at the SC02 and the SC05 too. SC 02 looks great on the ANHC.

Whaateva · 13th March 2009, 07:50

pics bro pics please!!!
Yes, the SC02/ 05 look great but i want SC 01 on my car.
Who got you the Lensos. Can you give out some info on the deal.

Guna · 13th March 2009, 09:35

Quote:

Originally Posted by nayyar.rao

Finally. I fitted the Primacy LC today on my ANHC 195/60/R15. Got a good buy back deal on my old ones. Phew what a relief.
These tyres look gorgeous and increase the ride height by around 6mm and very silent too.

Which is the alloy? I had liked LG-119 (League) but it seem to be an old design and nomore available.

nayyar.rao · 14th March 2009, 00:36

Quote:

Originally Posted by Whaateva

pics bro pics please!!!
Yes, the SC02/ 05 look great but i want SC 01 on my car.
Who got you the Lensos. Can you give out some info on the deal.

SC01 looks great too. I have changed my tyres as i got a very good buyback deal and the best price for the new ones..Believe me i have checked almost all tyre shops in Bangalore for Michelins (Pilot Primacies, XM1+s and MXV8s) since Jan 30th and this is by far the best. Changed to Primacy LC 195/60 R15. Tyres were a priority as i would not have got the rate if they had run a lot. The best rates for the Lenso's are from Sai Iyenger (Nithin) on Banerghatta Road. I am doing some more hunting on the Lensos before i call it enough and succumb to my emotions.

. By the way for a hundred more bucks more you could get their membership and avail of 3 Nitrogen fills, 3 puncture repairs, 3 alignments and 3 balancings valid for a year. I feel it is a good deal. Guys keep the network going so that we get a good deal on the Lensos.

Whaateva · 14th March 2009, 12:45

I am being quoted 27k for the SC05 for a set of 5. would it necessary to buy 5 rims or would 4 be enough.
More details on Sai Iyengar please..

nayyar.rao · 14th March 2009, 16:20

Quote:

Originally Posted by Whaateva

I am being quoted 27k for the SC05 for a set of 5. would it necessary to buy 5 rims or would 4 be enough.
More details on Sai Iyengar please..

Does 27K include fitting and necks and the other stuff? I still think it is a bit on the higher side..

Here you go... Sai Iyengar and Sons, Nithin G Balaji - 9945378168, Banerghatta Road, 1st Cross Bilekahalli...

razor4077 · 15th March 2009, 11:38

Saw an ANHC in my locality with some nice alloys. Didn't get a chance to click a pic, but it looked nice - multi-spoke design with silver + hyper-black finish.
What caught my eye was the Honda logo in the centre. Is Honda selling alloys as an option with the ANHC?

Guna · 15th March 2009, 12:31

Quote:

Originally Posted by razor4077

Is Honda selling alloys as an option with the ANHC?

They do. The design has a 'Y' kind of spoke which is partially machined on the face.

Perakath · 31st March 2009, 22:50

Hey all,

My folks bought an ANHC-E a couple of days ago. I was reading the owner's manual and under the 'Tyres' heading, it mentioned that if the wheels are changed to alloys, only Honda alloys should be used and not generic 3rd-party alloys. The reason? " because they [aftermarket alloys] are a universal design, they can cause stress to the suspension"-- or words to that effect.

Is there likely to be any truth in that, or merely a ploy to:

(a) Sell Honda accessories at absurd prices (someone said 11k per alloy?)

(b) Provide an excuse to void warranty if the owner does go in for 3rd-party aftermarket alloys?

iraghava · 1st April 2009, 00:25

It's (a). Don't believe any of that crap, as long as you get good quality wheels in the correct PCD there is no issue with you getting after market wheels. And unless you put in something like a 17 or 18" wheel there is no way they can void the warranty.

12th March 2009, 02:43	#47
iraghava Senior - BHPian Join Date: Oct 2005 Location: Bhaiyyaland Posts: 8,033 Thanked: 213 Times View My Garage	Actually the latest launch in the market is the Primacy LC. The MXV8 is being phased out.
	() Thanks

12th March 2009, 12:05	#48
Whaateva Newbie Join Date: Jan 2009 Location: Hebri Posts: 14 Thanked: 0 Times	Guys, I have booked the ANHC (white) and am having trouble finding a good set of alloys. I like the Lenso Samurai SC01 DFS but not a dealer in mangalore who has got them. two doubts here for the gurus: 1. do the samurais suit the ANHC for 15" wheels ( specs given below) 2. anybody know where i could get a set of these. Website: eCatalogDX SC01_DFS passenger TBC PCS Size 1565 4H 8H 10H PCD 100-114.3 ET +25 +38 COLOUR HS,DG,CB,CFR,DFS Size 1770 4H 8H 10H PCD 100-114.3 ET +25 +35 +42 COLOUR HS DG CB CFR DFS Size 1875 8H 10H PCD 100-114.3 ET +35 +42 +45 COLOUR HS DG CB CFR DFS
	() Thanks

13th March 2009, 07:50	#52
Whaateva Newbie Join Date: Jan 2009 Location: Hebri Posts: 14 Thanked: 0 Times	pics bro pics please!!! Yes, the SC02/ 05 look great but i want SC 01 on my car. Who got you the Lensos. Can you give out some info on the deal.
	() Thanks

14th March 2009, 12:45	#55
Whaateva Newbie Join Date: Jan 2009 Location: Hebri Posts: 14 Thanked: 0 Times	I am being quoted 27k for the SC05 for a set of 5. would it necessary to buy 5 rims or would 4 be enough. More details on Sai Iyengar please..
	() Thanks

15th March 2009, 11:38	#57
razor4077 Senior - BHPian Join Date: Sep 2006 Location: Mumbai Posts: 1,881 Thanked: 280 Times View My Garage	Saw an ANHC in my locality with some nice alloys. Didn't get a chance to click a pic, but it looked nice - multi-spoke design with silver + hyper-black finish. What caught my eye was the Honda logo in the centre. Is Honda selling alloys as an option with the ANHC?
	() Thanks

31st March 2009, 22:50	#59
Perakath BHPian Join Date: Feb 2009 Location: Chennai Posts: 259 Thanked: 29 Times	Hey all, My folks bought an ANHC-E a couple of days ago. I was reading the owner's manual and under the 'Tyres' heading, it mentioned that if the wheels are changed to alloys, only Honda alloys should be used and not generic 3rd-party alloys. The reason? " because they [aftermarket alloys] are a universal design, they can cause stress to the suspension"-- or words to that effect. Is there likely to be any truth in that, or merely a ploy to: (a) Sell Honda accessories at absurd prices (someone said 11k per alloy?) (b) Provide an excuse to void warranty if the owner does go in for 3rd-party aftermarket alloys?
	() Thanks

1st April 2009, 00:25	#60
iraghava Senior - BHPian Join Date: Oct 2005 Location: Bhaiyyaland Posts: 8,033 Thanked: 213 Times View My Garage	It's (a). Don't believe any of that crap, as long as you get good quality wheels in the correct PCD there is no issue with you getting after market wheels. And unless you put in something like a 17 or 18" wheel there is no way they can void the warranty.
	(1) Thanks

Thread Tools	Search this Thread
	Search this Thread: Advanced Search