Team-BHP - The Offroad Rims & Tyres Thread

- - The Offroad Rims & Tyres Thread (https://www.team-bhp.com/forum/4x4-technical/21143-offroad-rims-tyres-thread-81.html)

Quote:

Originally Posted by harjeev (Post 2342907)

IIRC Kandisa has 30/9.5/15 on the stock gypsy rims and not 31"

I did have 30X9.5 Dunlop GrandTrek A/T initially but then upgraded to the 31X10.5 Bighorns couple of months before the Leh trip.

Quote:

And yes if I am not mistaken his tyres also foul the body on full lock too.

No Sir,it does not! And my jeep also has 57" OKBJ in front.

Quote:

Originally Posted by Kandisa (Post 2343247)

And my jeep also has 57" OKBJ in front.

@Harjeev, had checked with Kandisa about that. Will having stock axles instead of the OKBJ impact whether the tyres foul or not? I believe stock axles are 53" and not 57".

Quote:

Originally Posted by AVR (Post 2343300)

@Harjeev, had checked with Kandisa about that. Will having stock axles instead of the OKBJ impact whether the tyres foul or not? I believe stock axles are 53" and not 57".

@AVR. Stock axles are 51" and not 53". If you want to go for 31x10.5 you need to get good negative offset alloys or you will loose your turning radius as on full turns the tire will rub your chasis.

Quote:

Originally Posted by 4x4addict (Post 2343828)

@AVR. Stock axles are 51" and not 53". If you want to go for 31x10.5 you need to get good negative offset alloys or you will loose your turning radius as on full turns the tire will rub your chasis.

Thanks 4x4addict, Have already ordered for Bighorns. Will see how it works out with the regular steel rims and decide accordingly. Somehow just can't take to the looks of most alloys on a Jeep.

About losing turn radius on full turns, I believe there's a way of adjusting/limiting the turn so that it doesnt foul on full turns. Correct? Let me know if I can do that for the time being.

Quote:

Originally Posted by AVR (Post 2343842)

About losing turn radius on full turns, I believe there's a way of adjusting/limiting the turn so that it doesnt foul on full turns. Correct? Let me know if I can do that for the time being.

There is a bolt that has to be adjusted to prevent tires from rubbing the chasis. But essentially you will have to move the bolt out to prevent tire rubbing and hence your turning radius will come down.

Quote:

Originally Posted by 4x4army (Post 2352458)

Hi Guys,
Has any one used this hancook dynapro MT tyres ?
size - 31x10.5R15

- Sanjay

Whats the cost? Not seen on any Jeep on the forum IIRC. If they are VFM then probably worth exploring. Am assuming you went through this link :
Hankook Dynapro MT RT03 Mud Tire Reviews and check it up against the usual suspects like the Bighorns/Trepadors/Geolandars.

Cheers,
Adi

Quote:

Originally Posted by 4x4army (Post 2352458)

Hi Guys,
Has any one used this hancook dynapro MT tyres ?
size - 31x10.5R15

- Sanjay

Same tyres are running in a friends Cj3b. Its 235 though. Will try to get a picture, i think i have it somewhere.

Quote:

Originally Posted by 4x4army (Post 2352458)

Hi Guys,
Has any one used this hancook dynapro MT tyres ?
size - 31x10.5R15

- Sanjay

Quote:

Originally Posted by 4x4army (Post 2352458)

Has any one used this hancook dynapro MT tyres ?
size - 31x10.5R15

Quote:

Originally Posted by 4x4army (Post 2353427)

It is Rs. 7850 + 12.5 % Tax / per tyre.

available in mumbai?

any other size available in 15" & 16"?

pm me the contacts.

Can anyone give me a fair idea as to what kind of mileage (kms not kmpl) we can expect out of
1. AT tyres
2. AT-S tyres
3. MT tyres

I have had HT tyres earlier and the mileage I got out of them on the gypsy was about 70K. Driving 70% city roads, 20% rural, 10% offroad.

Quote:

Originally Posted by jeepster (Post 1933878)

hi guys

these wheels are used by jeeps as well as samurais all over the world.
i don't think these are available new , please check second hand market in MUMBAI.
===========[*]Bolt Pattern 5 on 5.5 inch (139.7 pcd)[/list][/indent]sorry could not load the pics that i had.:Frustrati

Any idea of the price. Sir, may i get a plus offset in this pattern.

Quote:

Originally Posted by sumeshm (Post 2378625)

Any idea of the price. Sir, may i get a plus offset in this pattern.

Any particular reason for a plus-offset requirement? Almost always, people go in for negative offsets when it comes to the Jeeps.