Team-BHP > Buckle Up > 4x4 & Off-Roading > 4x4 Vehicles


Reply
 
Thread Tools Search this Thread
Old 2nd March 2019, 16:17   #211
Distinguished - BHPian
 
Tejas@perioimpl's Avatar
 
Join Date: Sep 2008
Location: Bombay
Posts: 4,103
Thanked: 6,018 Times
Default Re: Mitsubishi Pajero SFX - Project Overland Conversion

Another weekend at home = another pending job on the vehicle.

This time tackling rust.

I've been procrastinating removing some rust spots from below the rear windshield.

Mitsubishi Pajero SFX - Project Overland Conversion-03-rust.jpeg

When my parents were in UK last year, I had procured Hammerite Kurust from there and they carried it back.

It's got great reviews on amazon:

https://www.amazon.co.uk/Hammerite-5...P8H83ZR08G2VD0

Mitsubishi Pajero SFX - Project Overland Conversion-01-hammerite-back.jpeg

Mitsubishi Pajero SFX - Project Overland Conversion-02-hammerite-front.jpeg


Sanded and cleaned the area as good as I could:

Mitsubishi Pajero SFX - Project Overland Conversion-04-rust-sandpapered.jpeg

The Hammerite in a bowl with a bush flicked from my son's paint set

Mitsubishi Pajero SFX - Project Overland Conversion-05-bowl-brush.jpeg

Painting on the rust:

Mitsubishi Pajero SFX - Project Overland Conversion-06-painting-.jpeg


Finished and now to let it dry:

Mitsubishi Pajero SFX - Project Overland Conversion-07-just-painted.jpeg

Changed colour and dried properly after 3 hours:

Mitsubishi Pajero SFX - Project Overland Conversion-09-dried.jpeg

Closer view:

Mitsubishi Pajero SFX - Project Overland Conversion-10-dried-close-up.jpeg

The clear coat:

Mitsubishi Pajero SFX - Project Overland Conversion-08-clear-spray.jpeg

I did not have matching colour spray so thought I'll just protect the area with clear coat for the time being.

Masked the area:

Mitsubishi Pajero SFX - Project Overland Conversion-11-masking.jpeg


Clear Coat sprayed:

Mitsubishi Pajero SFX - Project Overland Conversion-12-sprayed-clear-coat.jpeg

Masking removed:

Mitsubishi Pajero SFX - Project Overland Conversion-13-masking-removed.jpeg


Didn't want to waste the left over Hammerite and you can't put it back so I painted on one rusted vise that I had:

Mitsubishi Pajero SFX - Project Overland Conversion-14-extra-vice.jpeg
Tejas@perioimpl is offline   (4) Thanks Reply With Quote
Old 2nd March 2019, 21:46   #212
BHPian
 
Join Date: May 2006
Location: Bangalore
Posts: 492
Thanked: 504 Times
Default

Great job. Now you need to get the paint done and you are good. One question though, how come that area rusted. That's a straight vertical point and water can't stand there. So I am wondering how it got rusted, are you in an area where there is lot of salt water in the air.....and what model year is your vehicle.
Traveler is online now   Reply With Quote
Old 5th March 2019, 09:16   #213
Distinguished - BHPian
 
Tejas@perioimpl's Avatar
 
Join Date: Sep 2008
Location: Bombay
Posts: 4,103
Thanked: 6,018 Times
Default Re: Mitsubishi Pajero SFX - Project Overland Conversion

Quote:
Originally Posted by Traveler View Post
Great job. Now you need to get the paint done and you are good. One question though, how come that area rusted. That's a straight vertical point and water can't stand there. So I am wondering how it got rusted, are you in an area where there is lot of salt water in the air.....and what model year is your vehicle.
Yes, I'm near to the sea and I bought her second hand when she had clocked 80,000kms. She's Dec 2010 manufactured.

And the rust was there when I bought her and unfortunately it was my laziness that prevented me from actioning on it sooner.

Why that area got rusted? I have no clue whatsoever.
Tejas@perioimpl is offline   Reply With Quote
Old 5th March 2019, 09:37   #214
BHPian
 
Join Date: May 2006
Location: Bangalore
Posts: 492
Thanked: 504 Times
Default

Quote:
Originally Posted by Tejas@perioimpl View Post
Yes, I'm near to the sea and I bought her second hand when she had clocked 80,000kms. She's Dec 2010 manufactured.

And the rust was there when I bought her and unfortunately it was my laziness that prevented me from actioning on it sooner.

Why that area got rusted? I have no clue whatsoever.
Ok being near the sea could explain the rust. Anyway you fixed it neatly and it won't spread now.

Mine is a 2011 April and done 1.05L , torchwood no rust signs anywhere. But then I have never been in a coastal area..
Traveler is online now   Reply With Quote
Old 5th March 2019, 16:20   #215
BHPian
 
KkVaidya's Avatar
 
Join Date: Nov 2008
Location: Ahmedabad
Posts: 705
Thanked: 317 Times
Default Re: Mitsubishi Pajero SFX - Project Overland Conversion

Quote:
Originally Posted by Tejas@perioimpl View Post

Why that area got rusted? I have no clue whatsoever.
Areas below the glass are prone to rust due to water collecting in the rubber beading.
KkVaidya is offline   (3) Thanks Reply With Quote
Old 11th March 2019, 13:08   #216
Distinguished - BHPian
 
Tejas@perioimpl's Avatar
 
Join Date: Sep 2008
Location: Bombay
Posts: 4,103
Thanked: 6,018 Times
Default Re: Mitsubishi Pajero SFX - Project Overland Conversion

Quote:
Originally Posted by Tejas@perioimpl View Post
...

The only thing missing is the front of the drawers. Because the camping trip was coming up, i just screwed in pieces of spare PVC.

What I have ordered from amazon are lockable stainless steel paddle slam latches that are used in RVs and a uncle was kind enough to carry it down for me from the USA.

This will be fitted to the front fascia.

Will keep updating this threads I progress.
In continuation with the above, finally got time this weekend to complete the project.

PS: Apologies in advance for the poor quality pics... Low light and flash photography on an old iPhone.

So finally got time to cut the front fascia to size and fitted the padlocks:

Mitsubishi Pajero SFX - Project Overland Conversion-locks-fitted.jpg

The PVC ply is soft and if someone pulled the latch hard, I was certain the the Pvc ply part where the bolt of the latch goes would break. Therefore, I decided to reinforce it with a small aluminium L shaped piece.

I wanted it to be flush so using a Dremel type tool I made a notch:

Mitsubishi Pajero SFX - Project Overland Conversion-notch-al.jpg

Fitted the aluminium piece:

Mitsubishi Pajero SFX - Project Overland Conversion-al-fitted.jpg

Drawers done:

Mitsubishi Pajero SFX - Project Overland Conversion-locks-fitted-1.jpg

Next up was to secure the drawer cabinet to the vehicle.

The Pajero has four tie down points.

The front two come on either side of the cabinet and the cabinet was made to size that they would physically restrain it from sideward movement:

Mitsubishi Pajero SFX - Project Overland Conversion-tie-down-point-front.jpg

Mitsubishi Pajero SFX - Project Overland Conversion-tie-down-point-front-1.jpg

The rear ones are slightly inside because of the wheel wells and therefore they come under the cabinet.

So I used two tie down straps (each 300kg rated).

The rear ones completely encircle the cabinet:

View from one side:

Mitsubishi Pajero SFX - Project Overland Conversion-back-strap-under-cabinet.jpg

The front ones are double looped and don't go under the cabinet:

Mitsubishi Pajero SFX - Project Overland Conversion-front-strap-1.jpg

Mitsubishi Pajero SFX - Project Overland Conversion-front-strap.jpg

The complete view:

Mitsubishi Pajero SFX - Project Overland Conversion-whatsapp-image-20190310-8.33.31-pm.jpeg

A gif of the latch on the drawer:

Name:  ezgif1b2bdc13a26a0.gif
Views: 1571
Size:  2.91 MB

Pendings:

1. Will need to use a flex or any similar film to mask the screw holes on the front fascia for aesthetics.

2. Planning either a thin carpet or rubber mat on the top to prevent scratches when loading stuff.

3. Compartments inside the drawers.

Last edited by Tejas@perioimpl : 11th March 2019 at 13:11. Reason: corrected typos
Tejas@perioimpl is offline   (5) Thanks Reply With Quote
Old 11th March 2019, 14:28   #217
Team-BHP Support
 
Jaggu's Avatar
 
Join Date: May 2004
Location: Bangalore
Posts: 18,677
Thanked: 9,857 Times
Default Re: Mitsubishi Pajero SFX - Project Overland Conversion

Quote:
Originally Posted by Tejas@perioimpl View Post
I've been procrastinating removing some rust spots from below the rear windshield.

Attachment 1854072
Doc you need to remove the glass and get this done properly, this temp fix will not work in the long run. Esp since you are in mumbai and close to coast. Remove the glass, clean the whole area. Pretty sure there is much more underneath that beading. Then use this and do a proper paint job.
Jaggu is offline   (3) Thanks Reply With Quote
Old 11th March 2019, 14:38   #218
BHPian
 
starter's Avatar
 
Join Date: Jan 2009
Location: Bangalore
Posts: 992
Thanked: 417 Times
Default Re: Mitsubishi Pajero SFX - Project Overland Conversion

Quote:
Originally Posted by Tejas@perioimpl View Post
In continuation with the above, finally got time this weekend to complete the project.
Tejas, it looks neat.
One question - Would the ply be the best option considering the weight it adds?
Are there any lighter alternatives like metal sheets/diamond plates or so?
Cheers,
Deepak
starter is offline   (1) Thanks Reply With Quote
Old 11th March 2019, 17:17   #219
Distinguished - BHPian
 
Tejas@perioimpl's Avatar
 
Join Date: Sep 2008
Location: Bombay
Posts: 4,103
Thanked: 6,018 Times
Default Re: Mitsubishi Pajero SFX - Project Overland Conversion

Quote:
Originally Posted by Jaggu View Post
Doc you need to remove the glass and get this done properly, this temp fix will not work in the long run. Esp since you are in mumbai and close to coast. Remove the glass, clean the whole area. Pretty sure there is much more underneath that beading. Then use this and do a proper paint job.
Yes, it's on the agenda. Probably in May I'll get it done.

Quote:
Originally Posted by starter View Post
Tejas, it looks neat.
One question - Would the ply be the best option considering the weight it adds?
Are there any lighter alternatives like metal sheets/diamond plates or so?
Cheers,
Deepak
I don't like metal sheets and diamond plates because they tend to rattle after a while and the PVC ply is extremely light. The entire empty unit was lifted by me alone and put in the vehicle.

Last edited by Tejas@perioimpl : 11th March 2019 at 17:19. Reason: corrected a typo
Tejas@perioimpl is offline   (3) Thanks Reply With Quote
Old 26th March 2019, 00:57   #220
BHPian
 
joybird's Avatar
 
Join Date: Nov 2013
Location: Chandigarh
Posts: 58
Thanked: 121 Times
Default

Great work on the Pajero. I was thinking something similar for my 2009 SFX which has clocked 78K now. Overland conversion seems the best thing to happen but looks like my project has hit a major blockage due to new rules for diesel and petrol vehicles in Delhi NCR. If I go ahead and convert the Pajero I won't now be able to drive South unless I avoid the complete NCR which is huge area. Matter of fact NCR starts from Karnal onwards if one is coming from Chd/ Amritsar side towards Delhi.
joybird is offline   (2) Thanks Reply With Quote
Old 9th June 2019, 15:25   #221
BHPian
 
Join Date: Mar 2019
Location: Bangalore
Posts: 66
Thanked: 115 Times
Default Re: Mitsubishi Pajero SFX - Project Overland Conversion

Fantastic job! Id like to make a small addition to your list of DIYs: How about adding gas struts to lift the bonnet? A useful feature methinks. Do consider this suggestion.
artemis_fowl is offline   Reply With Quote
Old 11th June 2019, 06:54   #222
BHPian
 
discoverwild's Avatar
 
Join Date: May 2009
Location: Coimbatore
Posts: 917
Thanked: 1,835 Times
Default Re: Mitsubishi Pajero SFX - Project Overland Conversion

Quote:
Originally Posted by Tejas@perioimpl View Post
.
Pendings:

1. Will need to use a flex or any similar film to mask the screw holes on the front fascia for aesthetics.

2. Planning either a thin carpet or rubber mat on the top to prevent scratches when loading stuff.

3. Compartments inside the drawers.
Great build, Doc. It's an inspiration for many to follow.

1. You could try PVC stickers used for nameplates, number plates etc.

2. Felt fabric is easily available in the market. You could just stick it on the drawers and it would look like a part of the car itself. The fabric can also be used inside the drawers to provide cushioning and reduce any kind of rattling inside.
discoverwild is offline   (2) Thanks Reply With Quote
Old 11th June 2019, 10:35   #223
Distinguished - BHPian
 
Tejas@perioimpl's Avatar
 
Join Date: Sep 2008
Location: Bombay
Posts: 4,103
Thanked: 6,018 Times
Default

Quote:
Originally Posted by discoverwild View Post
Great build, Doc. It's an inspiration for many to follow.

1. You could try PVC stickers used for nameplates, number plates etc.

2. Felt fabric is easily available in the market. You could just stick it on the drawers and it would look like a part of the car itself. The fabric can also be used inside the drawers to provide cushioning and reduce any kind of rattling inside.
All work on the vehicle is stopped currently because house renovation is going on and the carpenters have laid claim to my garage workspace!

In the meanwhile, I took off the roof rack for a bit. No reason, just a change of looks.

Mitsubishi Pajero SFX - Project Overland Conversion-img_8594.jpg


Used this connector so that the wires can be connected when I put it back on:

Mitsubishi Pajero SFX - Project Overland Conversion-img_8588.jpg

Quote:
Originally Posted by artemis_fowl View Post
Fantastic job! Id like to make a small addition to your list of DIYs: How about adding gas struts to lift the bonnet? A useful feature methinks. Do consider this suggestion.
Missed this post.

Honestly, my philosophy is not to fix things that aren't broke. The bonnet is not something that I own a lot that would necessitate gas struts. Plus, that's one more part that can fail and also would require drilling holes which I would like to avoid.

Last edited by moralfibre : 11th June 2019 at 12:35. Reason: Back to back posts.
Tejas@perioimpl is offline   (2) Thanks Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
New Pajero SFX spittingfire 4x4 Vehicles 108 11th December 2015 18:56
Mitsubishi Pajero SFX production to end in 2012 GTO The Indian Car Scene 85 5th September 2015 12:54
Pajero SFX one year on Sawyer Long-Term Ownership Reviews 70 15th October 2012 20:10
Mitsubishi Pajero SFX - Technical Specifications & Feature List Stratos Technical Stuff 3 17th February 2012 12:55


All times are GMT +5.5. The time now is 09:05.

Copyright 2000 - 2019, Team-BHP.com
Proudly powered by E2E Networks