[Abster]

Originally Posted by The Venom

How much did you pay for the entire modification??

Would have spent close to 1.5L for sure

Originally Posted by headers

Ride would differ with shackle lift. Steering response will change. High speed handling goes for a toss

Yeah you are right, handling at higher speeds has become worse, however for some reason the steering became lighter and much better to drive. I have even installed a sport steering, so the general perception is that the steering should become harder (due to the smaller circumference of the smaller steering) right? But surprisingly it did not! Dont know how that panned out

[Abster]

Few New Mods

- Snorkel
-Rocksliders
-New Deep dish steering. Its a larger circumference than the older one, so lot easier to steer.
-Also did white lettering to the tyres, since the profile looked a little bland


Also did the white lettering for my Montero along with the gypsy.

Attaching a pic of my Jonga too Need to start work on it as my next project, after Gypsy is done

[karizma9292]

Originally Posted by Abster

Few New Mods

- Snorkel
-Rocksliders
-New Deep dish steering. Its a larger circumference than the older one, so lot easier to steer.
-Also did white lettering to the tyres, since the profile looked a little bland


Also did the white lettering for my Montero along with the gypsy.

Attaching a pic of my Jonga too Need to start work on it as my next project, after Gypsy is done

Looks goo . Jonga looks swell , had one a few years ago completely restored .

Also i would like to know how you did the white lettering for the tyres.

[Abster]

Originally Posted by karizma9292

Looks goo . Jonga looks swell , had one a few years ago completely restored .

Thanks Karizma! Yeah Jonga is my pet project, cant wait to start doing it up, its such a fabulous looking truck! Mind sharing a few pics of your old Jonga?

Also i would like to know how you did the white lettering for the tyres.

Its painted..got a guy who paints number plates and hoarding to do it.
It might peel off after a year or so,just needs some touching up when it starts to fade.

[karizma9292]

Originally Posted by Abster

Its painted..got a guy who paints number plates and hoarding to do it.
It might peel off after a year or so,just needs some touching up when it starts to fade.

Thanks buddy , below is the link to my jonga thread

http://www.team-bhp.com/forum/4x4-ve...-k-jongas.html

[Abster]

Originally Posted by karizma9292

Thanks buddy , below is the link to my jonga thread

http://www.team-bhp.com/forum/4x4-ve...-k-jongas.html

Very well restored Jonga.Did the vehicle come with that horn pad? Looks damn good,Will get in touch with you shortly when i start mine,need all the inputs from experienced hands

[Bump-Stop]

"Iceberg" after some upgrades - enjoying her new winch and bumper...

[SnakemanJohny]

Originally Posted by Bump-Stop

"Iceberg" after some upgrades - enjoying her new winch and bumper...

Please advise on where to get such a bumper, to fit winch, and how much it costs. Winch and add-on bumpers are not available in Calcutta. In fact, one is lucky if one gets regular spares, either at the MASSs, or at the MGP retailers, or even in regular shops !

I have always wanted to fit a tough bumper and winch. Is the bumper made of aluminium ?

[dhanushs]

Originally Posted by SnakemanJohny

Please advise on where to get such a bumper, to fit winch, and how much it costs. Winch and add-on bumpers are not available in Calcutta....

Hi SnakemanJohny, check out : http://www.jeepkart.in/

[Bump-Stop]

Originally Posted by SnakemanJohny

Please advise on where to get such a bumper, to fit winch, and how much it costs. Winch and add-on bumpers are not available in Calcutta. In fact, one is lucky if one gets regular spares, either at the MASSs, or at the MGP retailers, or even in regular shops !

I have always wanted to fit a tough bumper and winch. Is the bumper made of aluminium ?

Hi, I got the bumper courtesy Mr Vijay Kumar of Swastikfabs 4x4 ....it is quite sturdy amd made of steel. Kindly contact Mr Vijay Kumar www.swastikfabs.com or swastikfabs 4x4 on facebook for updated prices.

[cool_dube]

Here is my contribution to the thread. Presenting my humble '98 model 1.3 lit (carb) Gypsy King acquired a few months back. Totally stock, except the LEDs on the front bumper.

[2legit2quit]

Originally Posted by cool_dube

Here is my contribution to the thread. Presenting my humble '98 model 1.3 lit (carb) Gypsy King acquired a few months back. Totally stock, except the LEDs on the front bumper.

Meet #SuSy my '97 1.3 carburetted baby. Twins

[cool_dube]

Originally Posted by 2legit2quit

Meet #SuSy my '97 1.3 carburetted baby. Twins

You bet, they really look like twins Nice trail pics - where is this? Thanks for sharing.

[2legit2quit]

Originally Posted by cool_dube

You bet, they really look like twins Nice trail pics - where is this? Thanks for sharing.

Haha, These trials are all in the peripheries of Hyderabad

[Vikram Arya]

Friends, I have recently joined Team BHP. I`m enclosing a few pictures of my newly acquired 2016 Gypsy King HT.

These pictures were taken a couple of months ago at the time of taking delivery & a couple shortly after that. I have a few upgrades planned & will post the pictures when these upgrades are complete during my next trip to India.