[jawabiker]

Hi I Guess Second Rebuild in 14 years???? Why so?

Are you going for the Stock features or are you opting for some modifications.

Please Stick to MRF Nylogrip 3.00 * 18 on rear and 2.75 * 18 with grip in front it provides excellent Road grip and also suits in the factory norms.

Regards,
Ranjit

[Ajaybiz]

My Stock RXZ which went for operation last week for planting the 1 mm oversize ported setup with pipes, welded crank, 28 MM flat sliders etc.
Installing RDD cdi with 90/100 kit, later on clipons and rearsets.

[Patriot_Vishwas]

Me on my friend's 2001 Yamaha Rx 135,five speed.
Very well maintained and he bought it home last year,for 45000 INR.

[Starscream1188]

My RX 135 4s
Make year: 1998
Fully Stock

[pramodkumar]

My RX 100 all ready for a re-test. Sorry for the night pics, i will post better daytime pics soon.





Guys any idea, which bike are these alloys from?



Pramod

[SriramEfunds]

Originally Posted by pramodkumar

My RX 100 all ready for a re-test. Sorry for the night pics, i will post better daytime pics soon.

Pramod

Pramod:- Good to see your bike. The gear shift pedal looks worn out. Kindly have it changed to new one.

[pramodkumar]

Originally Posted by SriramEfunds

Pramod:- Good to see your bike. The gear shift pedal looks worn out. Kindly have it changed to new one.

Gear pedal will be replaced. I need a good carb mech. My existing moron said the present one is too wornout to be repaired. New one cost 3 k but its not jap. To tell you the scale of the problem. 200 bucks worth of petrol over in a day. The overflow valve is leaking like crazy. Help.

Pramod

[SriramEfunds]

Originally Posted by pramodkumar

Gear pedal will be replaced. I need a good carb mech. My existing moron said the present one is too wornout to be repaired. New one cost 3 k but its not jap. To tell you the scale of the problem. 200 bucks worth of petrol over in a day. The overflow valve is leaking like crazy. Help.

Pramod

Since you mentioned the problem with regards to carb. Let me share my thoughts.

New MICARB RX100 carb which is available at YASS costs around 2300-2500/- if I'm not wrong.

There is a needle value assembly inside the carb might have got worn out. It costs around 90-100buck if I'm correct. There is a needle value will look like a sharpened pencil miniature. Check if the end circumference got any groove or step like mark, if yes, then that's the culprit. What happens when the petrol keep flowing is, the needle value acts like a stopper, however, if it has some grooves, might not work right resulting in overflow from the carb bowl sides. Apart from that you should also check for any signs of damage, crack, deformation on the carb float bowl perimeter that could contribute to the leakage. While you change the needle valve, also change the packing/gasket. There could be other factors as well but for now try checking above. Faced a similar issue with my RX and I learned these in a hard way.

Also a suggestion, you get most of the carb parts with YASS or the dealers atleast I know in KL, can't you rebuild it completely?

Slide, Spring, Needle value assembly, Nozzle Main (Emulsion tube/Atomizer), Jets, packing, carb float, air screws, float bowl etc.



Mods:- If my post cited as inappropriate thread, please delete.

[pramodkumar]

Originally Posted by SriramEfunds

New MICARB RX100 carb which is available at YASS costs around 2300-2500/- if I'm not wrong.

it costs 3k +

Originally Posted by SriramEfunds

There is a needle value assembly inside the carb might have got worn out. It costs around 90-100buck if I'm correct. There is a needle value will look like a sharpened pencil miniature. Check if the end circumference got any groove or step like mark, if yes, then that's the culprit. What happens when the petrol keep flowing is, the needle value acts like a stopper, however, if it has some grooves, might not work right resulting in overflow from the carb bowl sides. Apart from that you should also check for any signs of damage, crack, deformation on the carb float bowl perimeter that could contribute to the leakage. While you change the needle valve, also change the packing/gasket. There could be other factors as well but for now try checking above. Faced a similar issue with my RX and I learned these in a hard way.

this is what even my mech said but he said the carb is too wornout for this, there are no physical damage to the carb, can someone access the internals without opening it?

Originally Posted by SriramEfunds

Also a suggestion, you get most of the carb parts with YASS or the dealers atleast I know in KL, can't you rebuild it completely?

Slide, Spring, Needle value assembly, Nozzle Main (Emulsion tube/Atomizer), Jets, packing, carb float, air screws, float bowl etc.
.

I am looking for a champ guy here who can do this, money is not the issue, quality of work is, my bike is almost complete now, just needs a carb and crank work, which i need certified and professional hands for.

Guys in TVM please pitch in


Pramod

[jayakrishnan_v]

Hi Pramod, can you get in touch with Sydney Fernandes, Service manager of Hilton Yamaha in Ulloor and give my name Jayakrishnan as reference...he is a very good friend of mine and his number is 98952-09952. Get in touch with him and he will help you.

[pramodkumar]

Originally Posted by jayakrishnan_v

Hi Pramod, can you get in touch with Sydney Fernandes, Service manager of Hilton Yamaha in Ulloor and give my name Jayakrishnan as reference...he is a very good friend of mine and his number is 98952-09952. Get in touch with him and he will help you.

Spoke to him very helpful guy. Thanks,

Guys i need a overflow needle. Its not available in trivandrum.

Please help.

Pramod

[pramodkumar]

Guys, anyone, no one?

Anyways, on a lighter note, how many of you would believe if i say i painted this petrol tank using spray paint cans?




Pramod

[SriramEfunds]

Yamaha RX100
Year of Mfg: 1993
Year of Acq: 2011 -Dec
Restoration Started: 11th May 2012
Restoration Completed May 13th 2012
Spares collection: 6 months.
Spec: As per Manual, except RDD lighting kit for better visibility at night and tyres Front 2.75 and Rear 3.00 Michelin Sirac Street. All Genuine Yamaha spares were used in this rebuild.

Some pics of RX100.

[chiragh_bir]

Originally Posted by pramodkumar

My RX 100 all ready for a re-test. Sorry for the night pics, i will post better daytime pics soon.

Attachment 922482

Attachment 922483

Guys any idea, which bike are these alloys from?



Pramod

the maroon rx belonged to me ...

these where after market (racing boy ) alloys for gladiator .. sourced from Karol bagh !!

[jawabiker]

Maharastra there are tons of RX especially my hometone nashik has rich biking culture. Here there are still lots of RX & RD. So yamaha spares are available easily but i doubt the spares available with local dealers in yamaha packing are 11 out of 12 fake. Vendor cosmetic spares are available steadily. Supply is there as demand it